From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Chen Subject: [PATCH 08/12] doc: binding: pwrseq-usb-generic: add binding doc for generic usb power sequence driver Date: Fri, 17 Jun 2016 18:09:21 +0800 Message-ID: <1466158165-9380-9-git-send-email-peter.chen@nxp.com> References: <1466158165-9380-1-git-send-email-peter.chen@nxp.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1466158165-9380-1-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org, ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Cc: k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, arnd-r2nGTMty4D4@public.gmane.org, s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, mail-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org, troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org, festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, oscar-Bdbr4918Nnnk1uMJSBkQmQ@public.gmane.org, stephen.boyd-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Peter Chen List-Id: devicetree@vger.kernel.org Add binding doc for generic usb power sequence driver, and update generic usb device binding-doc accordingly. Signed-off-by: Peter Chen --- .../bindings/power/pwrseq/pwrseq-usb-generic.txt | 31 ++++++++++++++++++++++ .../devicetree/bindings/usb/usb-device.txt | 2 ++ 2 files changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/pwrseq/pwrseq-usb-generic.txt diff --git a/Documentation/devicetree/bindings/power/pwrseq/pwrseq-usb-generic.txt b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-usb-generic.txt new file mode 100644 index 0000000..8ad98382 --- /dev/null +++ b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-usb-generic.txt @@ -0,0 +1,31 @@ +The power sequence for generic USB Devices + +Some hard-wired USB devices need to do power sequence to let the +device work normally, the typical power sequence like: enable USB +PHY clock, toggle reset pin, etc. But current Linux USB driver +lacks of such code to do it, it may cause some hard-wired USB devices +works abnormal or can't be recognized by controller at all. The +power sequence will be done before this device can be found at USB +bus. + +Required properties: +- compatible : contains "usb-pwrseq-generic". + +Optional properties: +- clocks: the input clock for USB device. +- clock-frequency: the frequency for device's clock. +- reset-gpios: Should specify the GPIO for reset. +- reset-duration-us: the duration in microsecond for assert reset signal. +- enable-gpios: Should specify the GPIO for enable. +- power-supply: The regulator of the power + +Example: + +usb2415_pwrseq: usb2415_pwrseq { + compatible = "usb-pwrseq-generic"; + clocks = <&clks IMX6QDL_CLK_CKO>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-duration-us = <3000>; + enable-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; + power-supply = <®_usb_power>; +}; diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index 1c35e7b..4c8a25e 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -12,6 +12,7 @@ Required properties: for usbVID,PID. - reg: the port number which this device is connecting to, the range is 1-31. +- usb-pwrseq: phandle for power sequence. Example: @@ -24,5 +25,6 @@ Example: hub: genesys@1 { compatible = "usb5e3,608"; reg = <1>; + usb-pwrseq = <&usb_genesys_pwrseq>; }; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html