From: Florian Vaussard <florian.vaussard-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Hartmut Knaack <knaack.h-Mmb7MZpHnFY@public.gmane.org>,
Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>,
Peter Meerwald-Stadler
<pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>,
Slawomir Stepien <sst-IjDXvh/HVVUAvxtiuMwx3w@public.gmane.org>,
Joachim Eastwood
<manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Matt Ranostay <mranostay-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Cristina Moraru
<cristina.moraru09-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Florian Vaussard
<florian.vaussard-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
Subject: [PATCH 1/3] iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
Date: Tue, 21 Jun 2016 08:55:35 +0200 [thread overview]
Message-ID: <1466492137-32683-2-git-send-email-florian.vaussard@heig-vd.ch> (raw)
In-Reply-To: <1466492137-32683-1-git-send-email-florian.vaussard-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
This patch adds support for MCP454x, MCP456x, MCP464x and MCP466x parts.
The main difference with currently supported parts (MCP453x and alike) is
the addition of a non-volatile memory in order to recall the wiper setting
at power-on. This feature is currently not supported and only the
volatile memory is used to set the wiper.
Signed-off-by: Florian Vaussard <florian.vaussard-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
---
drivers/iio/potentiometer/Kconfig | 6 ++--
drivers/iio/potentiometer/mcp4531.c | 72 +++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 0941c8d4..55c2414 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -49,8 +49,10 @@ config MCP4531
depends on I2C
help
Say yes here to build support for the Microchip
- MCP4531, MCP4532, MCP4551, MCP4552,
- MCP4631, MCP4632, MCP4651, MCP4652
+ MCP4531, MCP4532, MCP4541, MCP4542,
+ MCP4551, MCP4552, MCP4561, MCP4562,
+ MCP4631, MCP4632, MCP4641, MCP4642,
+ MCP4651, MCP4652, MCP4661, MCP4662
digital potentiomenter chips.
To compile this driver as a module, choose M here: the
diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c
index 3b72e1a..2251173 100644
--- a/drivers/iio/potentiometer/mcp4531.c
+++ b/drivers/iio/potentiometer/mcp4531.c
@@ -8,12 +8,20 @@
* DEVID #Wipers #Positions Resistor Opts (kOhm) i2c address
* mcp4531 1 129 5, 10, 50, 100 010111x
* mcp4532 1 129 5, 10, 50, 100 01011xx
+ * mcp4541 1 129 5, 10, 50, 100 010111x
+ * mcp4542 1 129 5, 10, 50, 100 01011xx
* mcp4551 1 257 5, 10, 50, 100 010111x
* mcp4552 1 257 5, 10, 50, 100 01011xx
+ * mcp4561 1 257 5, 10, 50, 100 010111x
+ * mcp4562 1 257 5, 10, 50, 100 01011xx
* mcp4631 2 129 5, 10, 50, 100 0101xxx
* mcp4632 2 129 5, 10, 50, 100 01011xx
+ * mcp4641 2 129 5, 10, 50, 100 0101xxx
+ * mcp4642 2 129 5, 10, 50, 100 01011xx
* mcp4651 2 257 5, 10, 50, 100 0101xxx
* mcp4652 2 257 5, 10, 50, 100 01011xx
+ * mcp4661 2 257 5, 10, 50, 100 0101xxx
+ * mcp4662 2 257 5, 10, 50, 100 01011xx
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
@@ -37,18 +45,34 @@ enum mcp4531_type {
MCP453x_103,
MCP453x_503,
MCP453x_104,
+ MCP454x_502,
+ MCP454x_103,
+ MCP454x_503,
+ MCP454x_104,
MCP455x_502,
MCP455x_103,
MCP455x_503,
MCP455x_104,
+ MCP456x_502,
+ MCP456x_103,
+ MCP456x_503,
+ MCP456x_104,
MCP463x_502,
MCP463x_103,
MCP463x_503,
MCP463x_104,
+ MCP464x_502,
+ MCP464x_103,
+ MCP464x_503,
+ MCP464x_104,
MCP465x_502,
MCP465x_103,
MCP465x_503,
MCP465x_104,
+ MCP466x_502,
+ MCP466x_103,
+ MCP466x_503,
+ MCP466x_104,
};
static const struct mcp4531_cfg mcp4531_cfg[] = {
@@ -56,18 +80,34 @@ static const struct mcp4531_cfg mcp4531_cfg[] = {
[MCP453x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
[MCP453x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
[MCP453x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
+ [MCP454x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, },
+ [MCP454x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
+ [MCP454x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
+ [MCP454x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
[MCP455x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
[MCP455x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
[MCP455x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
[MCP455x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
+ [MCP456x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
+ [MCP456x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
+ [MCP456x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
+ [MCP456x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
[MCP463x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
[MCP463x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
[MCP463x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
[MCP463x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
+ [MCP464x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
+ [MCP464x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
+ [MCP464x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
+ [MCP464x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
[MCP465x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
[MCP465x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
[MCP465x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
[MCP465x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
+ [MCP466x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
+ [MCP466x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
+ [MCP466x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
+ [MCP466x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
};
#define MCP4531_WRITE (0 << 2)
@@ -187,6 +227,14 @@ static const struct i2c_device_id mcp4531_id[] = {
{ "mcp4532-103", MCP453x_103 },
{ "mcp4532-503", MCP453x_503 },
{ "mcp4532-104", MCP453x_104 },
+ { "mcp4541-502", MCP454x_502 },
+ { "mcp4541-103", MCP454x_103 },
+ { "mcp4541-503", MCP454x_503 },
+ { "mcp4541-104", MCP454x_104 },
+ { "mcp4542-502", MCP454x_502 },
+ { "mcp4542-103", MCP454x_103 },
+ { "mcp4542-503", MCP454x_503 },
+ { "mcp4542-104", MCP454x_104 },
{ "mcp4551-502", MCP455x_502 },
{ "mcp4551-103", MCP455x_103 },
{ "mcp4551-503", MCP455x_503 },
@@ -195,6 +243,14 @@ static const struct i2c_device_id mcp4531_id[] = {
{ "mcp4552-103", MCP455x_103 },
{ "mcp4552-503", MCP455x_503 },
{ "mcp4552-104", MCP455x_104 },
+ { "mcp4561-502", MCP456x_502 },
+ { "mcp4561-103", MCP456x_103 },
+ { "mcp4561-503", MCP456x_503 },
+ { "mcp4561-104", MCP456x_104 },
+ { "mcp4562-502", MCP456x_502 },
+ { "mcp4562-103", MCP456x_103 },
+ { "mcp4562-503", MCP456x_503 },
+ { "mcp4562-104", MCP456x_104 },
{ "mcp4631-502", MCP463x_502 },
{ "mcp4631-103", MCP463x_103 },
{ "mcp4631-503", MCP463x_503 },
@@ -203,6 +259,14 @@ static const struct i2c_device_id mcp4531_id[] = {
{ "mcp4632-103", MCP463x_103 },
{ "mcp4632-503", MCP463x_503 },
{ "mcp4632-104", MCP463x_104 },
+ { "mcp4641-502", MCP464x_502 },
+ { "mcp4641-103", MCP464x_103 },
+ { "mcp4641-503", MCP464x_503 },
+ { "mcp4641-104", MCP464x_104 },
+ { "mcp4642-502", MCP464x_502 },
+ { "mcp4642-103", MCP464x_103 },
+ { "mcp4642-503", MCP464x_503 },
+ { "mcp4642-104", MCP464x_104 },
{ "mcp4651-502", MCP465x_502 },
{ "mcp4651-103", MCP465x_103 },
{ "mcp4651-503", MCP465x_503 },
@@ -211,6 +275,14 @@ static const struct i2c_device_id mcp4531_id[] = {
{ "mcp4652-103", MCP465x_103 },
{ "mcp4652-503", MCP465x_503 },
{ "mcp4652-104", MCP465x_104 },
+ { "mcp4661-502", MCP466x_502 },
+ { "mcp4661-103", MCP466x_103 },
+ { "mcp4661-503", MCP466x_503 },
+ { "mcp4661-104", MCP466x_104 },
+ { "mcp4662-502", MCP466x_502 },
+ { "mcp4662-103", MCP466x_103 },
+ { "mcp4662-503", MCP466x_503 },
+ { "mcp4662-104", MCP466x_104 },
{}
};
MODULE_DEVICE_TABLE(i2c, mcp4531_id);
--
2.5.0
next prev parent reply other threads:[~2016-06-21 6:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 6:55 [PATCH 0/3] iio: potentiometer: mcp4531: New parts and device tree Florian Vaussard
2016-06-21 6:55 ` [PATCH 2/3] iio: potentiometer: mcp4531: Add device tree binding documentation Florian Vaussard
2016-06-21 7:38 ` Peter Rosin
[not found] ` <f763a2ea-6a82-a8f6-4afb-d09dba240927-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
2016-06-21 7:49 ` Florian Vaussard
[not found] ` <5768F180.4080601-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
2016-06-21 21:37 ` Rob Herring
[not found] ` <1466492137-32683-3-git-send-email-florian.vaussard-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
2016-06-21 21:43 ` Rob Herring
2016-06-22 6:19 ` Florian Vaussard
2016-06-21 6:55 ` [PATCH 3/3] iio: potentiometer: mcp4531: Add device tree binding Florian Vaussard
[not found] ` <1466492137-32683-4-git-send-email-florian.vaussard-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
2016-06-21 7:34 ` kbuild test robot
2016-06-21 7:51 ` Peter Rosin
[not found] ` <bf4dbd64-aac8-aba3-ec5c-4cd4d0e848f6-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
2016-06-22 6:22 ` Florian Vaussard
[not found] ` <829a4507-39d7-e04a-9672-6309def89ee2-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
2016-06-22 7:06 ` Peter Rosin
[not found] ` <dfdbc7dd-8457-c0ef-9f0e-e2c1d96e5b11-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
2016-06-23 8:50 ` Florian Vaussard
[not found] ` <576BA2DD.2060501-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
2016-06-26 14:53 ` Jonathan Cameron
[not found] ` <1466492137-32683-1-git-send-email-florian.vaussard-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
2016-06-21 6:55 ` Florian Vaussard [this message]
[not found] ` <1466492137-32683-2-git-send-email-florian.vaussard-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org>
2016-06-21 7:28 ` [PATCH 1/3] iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x Peter Rosin
2016-06-26 14:53 ` [PATCH 0/3] iio: potentiometer: mcp4531: New parts and device tree Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466492137-32683-2-git-send-email-florian.vaussard@heig-vd.ch \
--to=florian.vaussard-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=cristina.moraru09-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=florian.vaussard-EWQkb/GNqlFyDzI6CaY1VQ@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=knaack.h-Mmb7MZpHnFY@public.gmane.org \
--cc=lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mranostay-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org \
--cc=pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sst-IjDXvh/HVVUAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).