From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Dooks Subject: [PATCH v2 4/4] ARM: meson: enable RTC for ODroid-C1 Date: Mon, 27 Jun 2016 17:44:09 +0100 Message-ID: <1467045849-495-5-git-send-email-ben.dooks@codethink.co.uk> References: <1467045849-495-1-git-send-email-ben.dooks@codethink.co.uk> Return-path: In-Reply-To: <1467045849-495-1-git-send-email-ben.dooks-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-kernel-81qHHgoATdFT9dQujB1mzip2UmYkHbXO@public.gmane.org, rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org, alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, frowand.list-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Ben Dooks List-Id: devicetree@vger.kernel.org Now the RTC node has been added, enable it on the ODroid-C1 board. Note, the C1 does not have a battery by default, so the RTC will error out on those boards. The C1+ does have power to the RTC block whilst the external power is applied. Signed-off-by: Ben Dooks --- arch/arm/boot/dts/meson8b-odroidc1.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index e50f1a1..5c7826f 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -76,3 +76,8 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&rtc { + status = "okay"; +}; + -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html