From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wenyou Yang Subject: [PATCH v2 7/7] doc: bindings: act8945a-charger: Update properties Date: Tue, 28 Jun 2016 09:22:50 +0800 Message-ID: <1467076970-12206-8-git-send-email-wenyou.yang@atmel.com> References: <1467076970-12206-1-git-send-email-wenyou.yang@atmel.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1467076970-12206-1-git-send-email-wenyou.yang@atmel.com> Sender: linux-pm-owner@vger.kernel.org To: Sebastian Reichel , Dmitry Eremin-Solenikov , David Woodhouse , Rob Herring , Pawel Moll , Mark Brown , Ian Campbell , Kumar Gala Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Nicolas Ferre , linux-pm@vger.kernel.org, Wenyou Yang List-Id: devicetree@vger.kernel.org Due the driver improvements, update the properties, - Remove "active-semi,check-battery-temperature" property. - Add the properties, "active-semi,irq_gpio" and "active-semi,lbo-gpios". Signed-off-by: Wenyou Yang --- Changes in v2: None Documentation/devicetree/bindings/power/act8945a-charger.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/power/act8945a-charger.txt b/Documentation/devicetree/bindings/power/act8945a-charger.txt index bea254c..d7cf05b 100644 --- a/Documentation/devicetree/bindings/power/act8945a-charger.txt +++ b/Documentation/devicetree/bindings/power/act8945a-charger.txt @@ -4,10 +4,12 @@ Required properties: - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt. - active-semi,chglev-gpios: charge current level phandle with args as described in ../gpio/gpio.txt. + - active-semi,irq_gpios: specify the charger interrupt input phanle + with args as as described in ../gpio/gpio.txt. + - active-semi,lbo-gpios: specify the low battery voltage detect phandle + with args as as described in ../gpio/gpio.txt. Optional properties: - - active-semi,check-battery-temperature: boolean to check the battery - temperature or not. - active-semi,input-voltage-threshold-microvolt: unit: mV; Specifies the charger's input over-voltage threshold value; The value can be: 6600, 7000, 7500, 8000; default: 6600 -- 2.7.4