From: Suraj Jitindar Singh <sjitindarsingh-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
mpe-Gsx/Oe8HsFggBc27wqDAHg@public.gmane.org
Cc: arnd-r2nGTMty4D4@public.gmane.org,
robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org,
paulus-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org,
sjitindarsingh-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH V4 2/3] powerpc/opal: Add #define to get rc from an ASYNC_COMP opal_msg
Date: Tue, 28 Jun 2016 14:40:56 +1000 [thread overview]
Message-ID: <1467088857-14477-2-git-send-email-sjitindarsingh@gmail.com> (raw)
In-Reply-To: <1467088857-14477-1-git-send-email-sjitindarsingh-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
An opal_msg of type OPAL_MSG_ASYNC_COMP contains the return code in the
params[1] struct member. However this isn't intuitive or obvious when
reading the code and requires that a user look at the skiboot
documentation or opal-api.h to verify this.
Add a #define to get the return code from an opal_msg and update call
sites accordingly.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Change Log:
-> V4:
- Added Patch to Series
---
arch/powerpc/include/asm/opal-api.h | 4 ++++
arch/powerpc/platforms/powernv/opal-sensor.c | 2 +-
arch/powerpc/platforms/powernv/opal-sysparam.c | 4 ++--
drivers/i2c/busses/i2c-opal.c | 2 +-
drivers/leds/leds-powernv.c | 2 +-
drivers/mtd/devices/powernv_flash.c | 2 +-
drivers/rtc/rtc-opal.c | 4 ++--
7 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 9bb8ddf..7433cf0 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -387,6 +387,10 @@ struct opal_msg {
__be64 params[8];
};
+#define GET_OPAL_MSG_ASYNC_COMP_RC(msg) (msg.msg_type == OPAL_MSG_ASYNC_COMP ? \
+ be64_to_cpu(msg.params[1]) : \
+ OPAL_PARAMETER)
+
/* System parameter permission */
enum OpalSysparamPerm {
OPAL_SYSPARAM_READ = 0x1,
diff --git a/arch/powerpc/platforms/powernv/opal-sensor.c b/arch/powerpc/platforms/powernv/opal-sensor.c
index a06059d..f30fc35 100644
--- a/arch/powerpc/platforms/powernv/opal-sensor.c
+++ b/arch/powerpc/platforms/powernv/opal-sensor.c
@@ -55,7 +55,7 @@ int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data)
goto out_token;
}
- ret = opal_error_code(be64_to_cpu(msg.params[1]));
+ ret = opal_error_code(GET_OPAL_MSG_ASYNC_COMP_RC(msg));
*sensor_data = be32_to_cpu(data);
break;
diff --git a/arch/powerpc/platforms/powernv/opal-sysparam.c b/arch/powerpc/platforms/powernv/opal-sysparam.c
index afe66c5..9488bf5 100644
--- a/arch/powerpc/platforms/powernv/opal-sysparam.c
+++ b/arch/powerpc/platforms/powernv/opal-sysparam.c
@@ -67,7 +67,7 @@ static ssize_t opal_get_sys_param(u32 param_id, u32 length, void *buffer)
goto out_token;
}
- ret = opal_error_code(be64_to_cpu(msg.params[1]));
+ ret = opal_error_code(GET_OPAL_MSG_ASYNC_COMP_RC(msg));
out_token:
opal_async_release_token(token);
@@ -103,7 +103,7 @@ static int opal_set_sys_param(u32 param_id, u32 length, void *buffer)
goto out_token;
}
- ret = opal_error_code(be64_to_cpu(msg.params[1]));
+ ret = opal_error_code(GET_OPAL_MSG_ASYNC_COMP_RC(msg));
out_token:
opal_async_release_token(token);
diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
index 75dd6d0..7cd91b7 100644
--- a/drivers/i2c/busses/i2c-opal.c
+++ b/drivers/i2c/busses/i2c-opal.c
@@ -71,7 +71,7 @@ static int i2c_opal_send_request(u32 bus_id, struct opal_i2c_request *req)
if (rc)
goto exit;
- rc = be64_to_cpu(msg.params[1]);
+ rc = GET_OPAL_MSG_ASYNC_COMP_RC(msg);
if (rc != OPAL_SUCCESS) {
rc = i2c_opal_translate_error(rc);
goto exit;
diff --git a/drivers/leds/leds-powernv.c b/drivers/leds/leds-powernv.c
index dfb8bd3..3b07a09 100644
--- a/drivers/leds/leds-powernv.c
+++ b/drivers/leds/leds-powernv.c
@@ -118,7 +118,7 @@ static int powernv_led_set(struct powernv_led_data *powernv_led,
goto out_token;
}
- rc = be64_to_cpu(msg.params[1]);
+ rc = GET_OPAL_MSG_ASYNC_COMP_RC(msg);
if (rc != OPAL_SUCCESS)
dev_err(dev, "%s : OAPL async call returned failed [rc=%d]\n",
__func__, rc);
diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c
index d5b870b..803059a 100644
--- a/drivers/mtd/devices/powernv_flash.c
+++ b/drivers/mtd/devices/powernv_flash.c
@@ -95,7 +95,7 @@ static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op,
return -EIO;
}
- rc = be64_to_cpu(msg.params[1]);
+ rc = GET_OPAL_MSG_ASYNC_COMP_RC(msg);
if (rc == OPAL_SUCCESS) {
rc = 0;
if (retlen)
diff --git a/drivers/rtc/rtc-opal.c b/drivers/rtc/rtc-opal.c
index 9c18d6f..0b42645 100644
--- a/drivers/rtc/rtc-opal.c
+++ b/drivers/rtc/rtc-opal.c
@@ -134,7 +134,7 @@ static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
goto exit;
}
- rc = be64_to_cpu(msg.params[1]);
+ rc = GET_OPAL_MSG_ASYNC_COMP_RC(msg);
if (rc != OPAL_SUCCESS) {
rc = -EIO;
goto exit;
@@ -181,7 +181,7 @@ static int opal_set_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
goto exit;
}
- rc = be64_to_cpu(msg.params[1]);
+ rc = GET_OPAL_MSG_ASYNC_COMP_RC(msg);
if (rc != OPAL_SUCCESS)
rc = -EIO;
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-06-28 4:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-28 4:40 [PATCH V4 1/3] devicetree/bindings: Add binding for operator panel on FSP machines Suraj Jitindar Singh
[not found] ` <1467088857-14477-1-git-send-email-sjitindarsingh-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-06-28 4:40 ` Suraj Jitindar Singh [this message]
2016-06-28 11:58 ` [V4, 2/3] powerpc/opal: Add #define to get rc from an ASYNC_COMP opal_msg Michael Ellerman
[not found] ` <3rf48446rPz9sD5-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
2016-06-29 0:38 ` Suraj Jitindar Singh
2016-06-28 4:40 ` [PATCH V4 3/3] powerpc/drivers: Add driver for operator panel on FSP machines Suraj Jitindar Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467088857-14477-2-git-send-email-sjitindarsingh@gmail.com \
--to=sjitindarsingh-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=mpe-Gsx/Oe8HsFggBc27wqDAHg@public.gmane.org \
--cc=paulus-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).