* [PATCH v3 10/19] sh: SH7750/51 CPG Driver
[not found] <1467095795-5082-1-git-send-email-ysato@users.sourceforge.jp>
@ 2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 21:02 ` Rob Herring
2016-06-28 6:36 ` [PATCH v3 11/19] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
` (4 subsequent siblings)
5 siblings, 1 reply; 13+ messages in thread
From: Yoshinori Sato @ 2016-06-28 6:36 UTC (permalink / raw)
To: linux-sh, linux-clk, devicetree, linux-kernel; +Cc: Yoshinori Sato
Convert SH specific clock framework to CCF.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../bindings/clock/renesas,sh7750-cpg.txt | 25 ++
arch/sh/boards/Kconfig | 1 +
arch/sh/kernel/cpu/Makefile | 8 +-
arch/sh/kernel/cpu/clock.c | 6 +-
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 3 +-
drivers/clk/sh/Kconfig | 2 +
drivers/clk/sh/Makefile | 1 +
drivers/clk/sh/clk-sh7750cpg.c | 344 +++++++++++++++++++++
9 files changed, 387 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.txt
create mode 100644 drivers/clk/sh/Kconfig
create mode 100644 drivers/clk/sh/Makefile
create mode 100644 drivers/clk/sh/clk-sh7750cpg.c
diff --git a/Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.txt b/Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.txt
new file mode 100644
index 0000000..e763e2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.txt
@@ -0,0 +1,25 @@
+* Renesas SH7750/51 CPG
+
+Required Properties:
+
+ - compatible: Must be "renesas,sh7750-cpg"
+
+ - clocks: Reference to the parent clocks (xtal or external)
+
+ - #clock-cells: Must be 1
+
+ - reg: Base address and length of the FREQCR
+ and Base address and length of the CLKSTP00 (optional)
+
+ - renesas,mult: PLL1 multiply rate
+
+Example
+-------
+
+ cpg: cpg@ffc00000 {
+ compatible = "renesas,sh7750-cpg";
+ clocks = <&oclk>;
+ #clock-cells = <1>;
+ renesas,mult = <12>;
+ reg = <0xffc00000 32>, <0xfe0a0000 16>;
+ };
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 9e4ccd0..b6ff9df 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -13,6 +13,7 @@ config SH_DEVICE_TREE
select CLKSRC_OF
select GENERIC_CALIBRATE_DELAY
select GENERIC_IOMAP
+ select COMMON_CLK
help
Select Board Described by Device Tree to build a kernel that
does not hard-code any board-specific knowledge but instead uses
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index accc7ca..22ad0ee 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -16,6 +16,10 @@ obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/
# Common interfaces.
obj-$(CONFIG_SH_ADC) += adc.o
+ifndef CONFIG_COMMON_CLK
obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o
-
-obj-y += irq/ init.o clock.o fpu.o pfc.o proc.o
+endif
+ifndef CONFIG_GENERIC_IRQ_CHIP
+obj-y += irq/
+endif
+obj-y += init.o clock.o fpu.o pfc.o proc.o
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 4187cf4..8e66e23 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -22,13 +22,15 @@
int __init clk_init(void)
{
- int ret;
+ int ret = 0;
+#ifndef CONFIG_COMMON_CLK
ret = arch_clk_init();
if (unlikely(ret)) {
pr_err("%s: CPU clock registration failed.\n", __func__);
return ret;
}
+#endif
if (sh_mv.mv_clk_init) {
ret = sh_mv.mv_clk_init();
@@ -39,11 +41,13 @@ int __init clk_init(void)
}
}
+#ifndef CONFIG_COMMON_CLK
/* Kick the child clocks.. */
recalculate_root_clocks();
/* Enable the necessary init clocks */
clk_enable_init_clocks();
+#endif
return ret;
}
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 98efbfc..60d19d0 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -213,6 +213,7 @@ source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/qcom/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/samsung/Kconfig"
+source "drivers/clk/sh/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/ti/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index dcc5e69..c4bfbb9 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -86,5 +86,6 @@ obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_ARCH_ZX) += zte/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
-obj-$(CONFIG_H8300) += h8300/
+obj-$(CONFIG_H8300) += h8300/
obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/
+obj-$(CONFIG_SUPERH) += sh/
diff --git a/drivers/clk/sh/Kconfig b/drivers/clk/sh/Kconfig
new file mode 100644
index 0000000..2090415
--- /dev/null
+++ b/drivers/clk/sh/Kconfig
@@ -0,0 +1,2 @@
+config COMMON_CLK_SH7750
+ bool "CPG driver for SH7750/SH7751"
diff --git a/drivers/clk/sh/Makefile b/drivers/clk/sh/Makefile
new file mode 100644
index 0000000..7ce4da3
--- /dev/null
+++ b/drivers/clk/sh/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_COMMON_CLK_SH7750) += clk-sh7750cpg.o
diff --git a/drivers/clk/sh/clk-sh7750cpg.c b/drivers/clk/sh/clk-sh7750cpg.c
new file mode 100644
index 0000000..a538be4
--- /dev/null
+++ b/drivers/clk/sh/clk-sh7750cpg.c
@@ -0,0 +1,344 @@
+/*
+ * Renesas SH7750/51 clock driver
+ *
+ * Copyright 2016 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/* Available FREQCR settings */
+static const int freqcr_table[] = {
+ 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0408,
+ 0x0409, 0x040a, 0x040b, 0x040c, 0x0411, 0x0412,
+ 0x0413, 0x0414, 0x041a, 0x041b, 0x041c, 0x0423,
+ 0x0424, 0x0448, 0x0449, 0x044a, 0x044b, 0x044c,
+ 0x0451, 0x0452, 0x0453, 0x0454, 0x045a, 0x045b,
+ 0x045c, 0x0463, 0x0464, 0x0491, 0x0492, 0x0493,
+ 0x0494, 0x049a, 0x049b, 0x049c, 0x04a3, 0x04a4,
+ 0x04da, 0x04db, 0x04dc, 0x04e3, 0x04e4, 0x0523,
+ 0x0524, 0x0000, 0x0001, 0x0002, 0x0003, 0x0004,
+ 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x0011,
+ 0x0012, 0x0013, 0x0014, 0x0019, 0x001a, 0x001b,
+ 0x001c, 0x0023, 0x0024, 0x0048, 0x0049, 0x004a,
+ 0x004b, 0x004c, 0x0051, 0x0052, 0x0053, 0x0054,
+ 0x0059, 0x005a, 0x005b, 0x005c, 0x0063, 0x0064,
+ 0x0091, 0x0092, 0x0093, 0x0094, 0x0099, 0x009a,
+ 0x009b, 0x009c, 0x00a3, 0x00a4, 0x00d1, 0x00d2,
+ 0x00d3, 0x00d4, 0x00d9, 0x00da, 0x00db, 0x00dc,
+ 0x00e3, 0x00e4, 0x0123, 0x0124, 0x0163, 0x0164,
+};
+
+struct priv {
+ void __iomem *freqcr;
+ void __iomem *clkstp;
+ int mult;
+ struct clk **clks;
+};
+
+struct cpg_clock {
+ struct clk_hw hw;
+ struct priv *priv;
+ int index;
+};
+
+struct clockname {
+ char *name;
+ int index;
+};
+
+static const struct clockname clocknames[] __initconst = {
+ { .name = "sci", .index = 0 },
+ { .name = "rtc", .index = 1 },
+ { .name = "tmu0", .index = 2 },
+ { .name = "tmu1", .index = 2 },
+ { .name = "tmu2", .index = 2 },
+ { .name = "scif", .index = 3 },
+ { .name = "dmac", .index = 4 },
+ { .name = "ubc", .index = 8 },
+ { .name = "sq", .index = 9 },
+ { .name = "intc", .index = 16 },
+ { .name = "tmu3", .index = 17 },
+ { .name = "tmu4", .index = 17 },
+ { .name = "pcic", .index = 18 },
+ { .name = "core", .index = 128 },
+};
+
+static const int iclk_div[] = {1, 2, 3, 4, 6, 8, 0, 0};
+static const int pclk_div[] = {2, 3, 4, 6, 8, 0, 0, 0};
+
+static DEFINE_SPINLOCK(clklock);
+
+#define to_cpg_clock(_hw) container_of(_hw, struct cpg_clock, hw)
+
+static unsigned long pllout(u16 freqcr, unsigned long parent_rate, int mult)
+{
+ if ((freqcr >> 10) & 1)
+ return parent_rate * mult;
+ else
+ return parent_rate;
+}
+
+static unsigned long cpg_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct cpg_clock *cpg_clock = to_cpg_clock(hw);
+ struct priv *priv = cpg_clock->priv;
+ unsigned long div;
+ u16 freqcr;
+
+ freqcr = ioread16(priv->freqcr);
+ if (cpg_clock->index == 128)
+ div = iclk_div[(freqcr >> 6) & 7];
+ else
+ div = pclk_div[freqcr & 7];
+ return pllout(freqcr, parent_rate, priv->mult) / div;
+}
+
+static u16 get_best_freqcr(unsigned long rate,
+ unsigned long pclk_rate,
+ unsigned long parent, int mult)
+{
+ int i;
+ int div;
+ u16 freqcr;
+
+ for (i = 0; i < ARRAY_SIZE(freqcr_table); i++) {
+ freqcr = freqcr_table[i];
+ if (pllout(freqcr, parent, mult) / pclk_div[freqcr & 7]
+ != pclk_rate)
+ continue;
+ div = iclk_div[(freqcr >> 6) & 7];
+ if (pllout(freqcr, parent, mult) / div < rate)
+ return freqcr;
+ }
+ return 0;
+}
+
+static long cpg_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct cpg_clock *cpg_clock = to_cpg_clock(hw);
+ struct priv *priv = cpg_clock->priv;
+ unsigned long pclk_rate;
+ u16 freqcr;
+ int div;
+
+ freqcr = ioread16(priv->freqcr);
+ pclk_rate = pllout(freqcr, *prate, priv->mult) / pclk_div[freqcr & 7];
+
+ freqcr = get_best_freqcr(rate, pclk_rate, *prate, priv->mult);
+ if (cpg_clock->index == 128)
+ div = iclk_div[(freqcr >> 6) & 7];
+ else
+ div = pclk_div[freqcr & 7];
+
+ return pllout(freqcr, *prate, priv->mult) / div;
+}
+
+static int cpg_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct cpg_clock *cpg_clock = to_cpg_clock(hw);
+ struct priv *priv = cpg_clock->priv;
+ unsigned long flags;
+ unsigned long pclk_rate;
+ u16 freqcr, new_freqcr;
+
+ if (cpg_clock->index != 128)
+ return 0;
+
+ freqcr = ioread16(priv->freqcr);
+ pclk_rate = pllout(freqcr, parent_rate, priv->mult) /
+ pclk_div[freqcr & 7];
+
+ new_freqcr = get_best_freqcr(rate, pclk_rate, parent_rate, priv->mult);
+
+ if ((freqcr & 0x0200) == 0 && (new_freqcr & 0x0200) != 0) {
+ /* PLL on */
+ /* required stable time */
+ spin_lock_irqsave(&clklock, flags);
+ iowrite16(0x5a00, priv->freqcr + 8);
+ iowrite16(0xa503, priv->freqcr + 12);
+ iowrite16(new_freqcr, priv->freqcr);
+ spin_unlock_irqrestore(&clklock, flags);
+ } else {
+ /* PLL state no change */
+ /* not required stable time */
+ iowrite16(new_freqcr, priv->freqcr);
+ }
+ return 0;
+}
+
+static int cpg_enable(struct clk_hw *hw)
+{
+ struct cpg_clock *cpg_clock = to_cpg_clock(hw);
+ struct priv *priv = cpg_clock->priv;
+ u8 stbcr;
+
+ switch ((cpg_clock->index >> 3) & 3) {
+ case 0:
+ /* STBCR */
+ stbcr = ioread8(priv->freqcr + 4);
+ stbcr &= ~(1 << (cpg_clock->index & 7));
+ iowrite8(stbcr, priv->freqcr + 4);
+ break;
+ case 1:
+ /* STBCR2 */
+ stbcr = ioread8(priv->freqcr + 16);
+ stbcr &= ~(1 << (cpg_clock->index & 7));
+ iowrite8(stbcr, priv->freqcr + 16);
+ break;
+ case 2:
+ /* CLKSTPCLR00 */
+ iowrite32(1 << (cpg_clock->index - 16), priv->clkstp + 8);
+ break;
+ }
+ return 0;
+}
+
+static void cpg_disable(struct clk_hw *hw)
+{
+ struct cpg_clock *cpg_clock = to_cpg_clock(hw);
+ struct priv *priv = cpg_clock->priv;
+ u8 stbcr;
+
+ switch ((cpg_clock->index >> 3) & 3) {
+ case 0:
+ /* STBCR */
+ stbcr = ioread8(priv->freqcr + 4);
+ stbcr |= (1 << (cpg_clock->index & 7));
+ iowrite8(stbcr, priv->freqcr + 4);
+ break;
+ case 1:
+ /* STBCR2 */
+ stbcr = ioread8(priv->freqcr + 16);
+ stbcr |= (1 << (cpg_clock->index & 7));
+ iowrite8(stbcr, priv->freqcr + 16);
+ break;
+ case 2:
+ /* CLKSTP00 */
+ iowrite32(1 << (cpg_clock->index - 16), priv->clkstp);
+ break;
+ }
+}
+
+struct clk *sh7750_onecell_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct priv *priv = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= ARRAY_SIZE(clocknames)) {
+ pr_err("%s: invalid clock index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return priv->clks[idx];
+}
+
+static const struct clk_ops cpg_ops = {
+ .recalc_rate = cpg_recalc_rate,
+ .round_rate = cpg_round_rate,
+ .set_rate = cpg_set_rate,
+ .enable = cpg_enable,
+ .disable = cpg_disable,
+};
+
+static struct clk * __init sh7750_cpg_register(struct device_node *node,
+ const struct clockname *name,
+ const char *parent_name,
+ struct priv *priv)
+{
+ struct cpg_clock *cpg_clock;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ cpg_clock = kzalloc(sizeof(struct cpg_clock), GFP_KERNEL);
+ if (!cpg_clock) {
+ pr_err("%s: failed to alloc memory", name->name);
+ return NULL;
+ }
+
+ init.name = name->name;
+ init.ops = &cpg_ops;
+ init.flags = CLK_IS_BASIC;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ cpg_clock->hw.init = &init;
+ cpg_clock->priv = priv;
+ cpg_clock->index = name->index;
+
+ clk = clk_register(NULL, &cpg_clock->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register %s pll clock (%ld)\n",
+ __func__, name->name, PTR_ERR(clk));
+ return NULL;
+ }
+ return clk;
+}
+
+static void __init sh7750_cpg_setup(struct device_node *node)
+{
+ const char *parent_name;
+ struct priv *priv;
+ int i;
+
+ priv = kzalloc(sizeof(struct priv), GFP_KERNEL);
+ if (priv == NULL) {
+ pr_err("%s: failed to alloc memory",
+ node->name);
+ return;
+ }
+ priv->clks = kmalloc_array(sizeof(priv->clks), ARRAY_SIZE(clocknames),
+ GFP_KERNEL);
+ if (priv->clks == NULL) {
+ pr_err("%s: failed to alloc memory",
+ node->name);
+ kfree(priv);
+ return;
+ }
+ for (i = 0; i < ARRAY_SIZE(clocknames); i++)
+ priv->clks[i] = ERR_PTR(-ENOENT);
+
+ priv->freqcr = of_iomap(node, 0);
+ if (priv->freqcr == NULL) {
+ pr_err("%s: failed to map frequenct control register",
+ node->name);
+ goto free_clock;
+ }
+
+ /* Optional register */
+ priv->clkstp = of_iomap(node, 1);
+
+ of_property_read_u32_index(node, "renesas,mult", 0, &priv->mult);
+
+ parent_name = of_clk_get_parent_name(node, 0);
+
+ for (i = 0; i < ARRAY_SIZE(clocknames); i++) {
+ priv->clks[i] = sh7750_cpg_register(node, &clocknames[i],
+ parent_name, priv);
+ if (priv->clks[i] == NULL)
+ goto unmap_reg;
+ }
+ of_clk_add_provider(node, sh7750_onecell_get, priv);
+ return;
+
+unmap_reg:
+ if (priv->clkstp)
+ iounmap(priv->clkstp);
+ iounmap(priv->freqcr);
+free_clock:
+ for (i = 0; i < ARRAY_SIZE(clocknames); i++)
+ if (priv->clks[i] != ERR_PTR(-ENOENT) && priv->clks[i])
+ clk_unregister(priv->clks[i]);
+ kfree(priv->clks);
+ kfree(priv);
+}
+
+CLK_OF_DECLARE(sh7750_cpg, "renesas,sh7750-cpg", sh7750_cpg_setup);
--
2.7.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v3 10/19] sh: SH7750/51 CPG Driver
2016-06-28 6:36 ` [PATCH v3 10/19] sh: SH7750/51 CPG Driver Yoshinori Sato
@ 2016-06-28 21:02 ` Rob Herring
0 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2016-06-28 21:02 UTC (permalink / raw)
To: Yoshinori Sato; +Cc: linux-sh, linux-clk, devicetree, linux-kernel
On Tue, Jun 28, 2016 at 03:36:26PM +0900, Yoshinori Sato wrote:
> Convert SH specific clock framework to CCF.
>
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
> .../bindings/clock/renesas,sh7750-cpg.txt | 25 ++
Acked-by: Rob Herring <robh@kernel.org>
> arch/sh/boards/Kconfig | 1 +
> arch/sh/kernel/cpu/Makefile | 8 +-
> arch/sh/kernel/cpu/clock.c | 6 +-
> drivers/clk/Kconfig | 1 +
> drivers/clk/Makefile | 3 +-
> drivers/clk/sh/Kconfig | 2 +
> drivers/clk/sh/Makefile | 1 +
> drivers/clk/sh/clk-sh7750cpg.c | 344 +++++++++++++++++++++
> 9 files changed, 387 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/renesas,sh7750-cpg.txt
> create mode 100644 drivers/clk/sh/Kconfig
> create mode 100644 drivers/clk/sh/Makefile
> create mode 100644 drivers/clk/sh/clk-sh7750cpg.c
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 11/19] sh: Add PCI host bridge driver for SH7751
[not found] <1467095795-5082-1-git-send-email-ysato@users.sourceforge.jp>
2016-06-28 6:36 ` [PATCH v3 10/19] sh: SH7750/51 CPG Driver Yoshinori Sato
@ 2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 21:05 ` Rob Herring
2016-06-28 6:36 ` [PATCH v3 12/19] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato
` (3 subsequent siblings)
5 siblings, 1 reply; 13+ messages in thread
From: Yoshinori Sato @ 2016-06-28 6:36 UTC (permalink / raw)
To: linux-pci, devicetree, linux-sh, linux-kernel, "Date:Mon",
27, Jun, 2016, "15:38:04", +0900
Cc: Yoshinori Sato
This is an alternative SH7751 PCI driver.
Existing driver (arch/sh/drivers/pci/pci-sh7751) uses SH specific interface.
But this driver uses common PCI interface. It is more modern and generic.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../devicetree/bindings/pci/sh7751-pci.txt | 51 ++++
arch/sh/boards/Kconfig | 1 +
arch/sh/drivers/Makefile | 2 +
arch/sh/include/asm/io.h | 6 +
drivers/pci/host/Kconfig | 7 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-sh7751.c | 326 +++++++++++++++++++++
7 files changed, 394 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/sh7751-pci.txt
create mode 100644 drivers/pci/host/pci-sh7751.c
diff --git a/Documentation/devicetree/bindings/pci/sh7751-pci.txt b/Documentation/devicetree/bindings/pci/sh7751-pci.txt
new file mode 100644
index 0000000..c3ec71a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/sh7751-pci.txt
@@ -0,0 +1,51 @@
+* Renesas SH7751 PCI host interfaces
+
+Required properties:
+ - compatible: "renesas,sh7751-pci" is required.
+ And board specific compatible if fixup required.
+
+ - reg: base address and length of the PCI controller registers.
+ - #address-cells: set to <2>
+ - #size-cells: set to <1>
+ - bus-range: PCI bus numbers covered
+ - device_type: set to "pci"
+ - ranges: ranges for the PCI memory and I/O regions.
+ - interrupt-map-mask and interrupt-map: standard PCI properties
+ to define the mapping of the PCI interface to interrupt
+ numbers.
+
+Example:
+ pci: pci-controller@fe200000 {
+ compatible = "renesas,sh7751-pci", "iodata,landisk";
+ device_type = "pci";
+ bus-range = <0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>,
+ <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>;
+ reg = <0xfe200000 0x0400>,
+ <0x0c000000 0x04000000>,
+ <0xff800000 0x0030>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x1800 0 7>;
+ interrupt-map = <0x0000 0 1 &cpldintc evt2irq(0x2a0) 0
+ 0x0000 0 2 &cpldintc evt2irq(0x2c0) 0
+ 0x0000 0 3 &cpldintc evt2irq(0x2e0) 0
+ 0x0000 0 4 &cpldintc evt2irq(0x300) 0
+
+ 0x0800 0 1 &cpldintc evt2irq(0x2c0) 0
+ 0x0800 0 2 &cpldintc evt2irq(0x2e0) 0
+ 0x0800 0 3 &cpldintc evt2irq(0x300) 0
+ 0x0800 0 4 &cpldintc evt2irq(0x2a0) 0
+
+ 0x1000 0 1 &cpldintc evt2irq(0x2e0) 0
+ 0x1000 0 2 &cpldintc evt2irq(0x300) 0
+ 0x1000 0 3 &cpldintc evt2irq(0x2a0) 0
+ 0x1000 0 4 &cpldintc evt2irq(0x2c0) 0
+
+ 0x1800 0 1 &cpldintc evt2irq(0x300) 0
+ 0x1800 0 2 &cpldintc evt2irq(0x2a0) 0
+ 0x1800 0 3 &cpldintc evt2irq(0x2c0) 0
+ 0x1800 0 4 &cpldintc evt2irq(0x2e0) 0>;
+ };
+};
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index b6ff9df..cfde921 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -14,6 +14,7 @@ config SH_DEVICE_TREE
select GENERIC_CALIBRATE_DELAY
select GENERIC_IOMAP
select COMMON_CLK
+ select SYS_SUPPORTS_PCI
help
Select Board Described by Device Tree to build a kernel that
does not hard-code any board-specific knowledge but instead uses
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
index e13f06b..382e86f 100644
--- a/arch/sh/drivers/Makefile
+++ b/arch/sh/drivers/Makefile
@@ -4,7 +4,9 @@
obj-y += dma/
+ifndef CONFIG_SH_DEVICE_TREE
obj-$(CONFIG_PCI) += pci/
+endif
obj-$(CONFIG_SUPERHYWAY) += superhyway/
obj-$(CONFIG_PUSH_SWITCH) += push-switch.o
obj-$(CONFIG_HEARTBEAT) += heartbeat.o
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 3280a6b..df62a9f 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -387,6 +387,12 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
int valid_phys_addr_range(phys_addr_t addr, size_t size);
int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+#define PCI_IOBASE 0xfe240000UL
+
+#define HAVE_ARCH_PIO_SIZE
+#define PIO_OFFSET PCI_IOBASE
+#define PIO_MASK 0x3ffffUL
+#define PIO_RESERVED 0x40000UL
#endif /* __KERNEL__ */
#endif /* __ASM_SH_IO_H */
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 5d2374e..df60505 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -245,4 +245,11 @@ config PCIE_ARMADA_8K
Designware hardware and therefore the driver re-uses the
Designware core functions to implement the driver.
+config PCI_SH7751
+ bool "Renesas SH7751 On-Chip PCI controller"
+ depends on OF && SUPERH
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want PCI support on SH7751.
+
endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 9c8698e..4681e49 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
+obj-$(CONFIG_PCI_SH7751) += pci-sh7751.o
diff --git a/drivers/pci/host/pci-sh7751.c b/drivers/pci/host/pci-sh7751.c
new file mode 100644
index 0000000..d851fcf3
--- /dev/null
+++ b/drivers/pci/host/pci-sh7751.c
@@ -0,0 +1,326 @@
+/*
+ * SH7751 PCI driver
+ * Copyright (C) 2016 Yoshinori Sato
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include "../ecam.h"
+
+#define SH7751_PCICONF1 0x4 /* PCI Config Reg 1 */
+#define SH7751_PCICONF4 0x10 /* PCI Config Reg 4 */
+#define SH7751_PCICONF5 0x14 /* PCI Config Reg 5 */
+#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */
+#define SH4_PCICR 0x100 /* PCI Control Register */
+ #define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
+ #define SH4_PCICR_FTO BIT(10) /* TRDY/IRDY Enable */
+ #define SH4_PCICR_TRSB BIT(9) /* Target Read Single */
+ #define SH4_PCICR_BSWP BIT(8) /* Target Byte Swap */
+ #define SH4_PCICR_PLUP BIT(7) /* Enable PCI Pullup */
+ #define SH4_PCICR_ARBM BIT(6) /* PCI Arbitration Mode */
+#define SH4_PCICR_MD (BIT(4) | BIT(5)) /* MD9 and MD10 status */
+ #define SH4_PCICR_SERR BIT(3) /* SERR output assert */
+ #define SH4_PCICR_INTA BIT(2) /* INTA output assert */
+ #define SH4_PCICR_PRST BIT(1) /* PCI Reset Assert */
+ #define SH4_PCICR_CFIN BIT(0) /* Central Fun. Init Done */
+#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */
+#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */
+#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */
+#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */
+#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
+ #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */
+ #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */
+ #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */
+ #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */
+ #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */
+ #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */
+ #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */
+ #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */
+ #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */
+ #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */
+ #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */
+#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
+#define SH4_PCIPAR 0x1C0 /* PIO Address Register */
+ #define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
+ #define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
+ #define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
+ #define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */
+#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
+ #define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
+ #define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
+#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */
+/* For definitions of BCR, MCR see ... */
+#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */
+ #define SH4_PCIMBR0 SH4_PCIBCR1
+#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */
+ #define SH4_PCIMBMR0 SH4_PCIBCR2
+#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */
+#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */
+#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */
+ #define SH4_PCIMBR2 SH4_PCIWCR3
+#define SH4_PCIMCR 0x1F4 /* Memory Control Register */
+#define SH4_PCIPDR 0x220 /* Port IO Data Register */
+
+/* Platform Specific Values */
+#define SH7751_VENDOR_ID 0x1054
+#define SH7751_DEVICE_ID 0x3505
+#define SH7751R_DEVICE_ID 0x350e
+
+/* Memory Control Registers */
+#define SH7751_BCR1 0x0000 /* Memory BCR1 Register */
+#define SH7751_BCR2 0x0004 /* Memory BCR2 Register */
+#define SH7751_BCR3 0x0050 /* Memory BCR3 Register */
+#define SH7751_WCR1 0x0008 /* Wait Control 1 Register */
+#define SH7751_WCR2 0x000C /* Wait Control 2 Register */
+#define SH7751_WCR3 0x0010 /* Wait Control 3 Register */
+#define SH7751_MCR 0x0014 /* Memory Control Register */
+
+#define pcic_writel(val, reg) iowrite32(val, pci_reg_base + (reg))
+#define pcic_readl(reg) ioread32(pci_reg_base + (reg))
+
+/*
+ * PCIC fixups
+ */
+
+#define PCIMCR_MRSET 0x40000000
+#define PCIMCR_RFSH 0x00000004
+
+static void __init landisk_fixup(void __iomem *pci_reg_base, void __iomem *bcr)
+{
+ unsigned long bcr1, mcr;
+
+ bcr1 = ioread32(bcr + SH7751_BCR1);
+ bcr1 |= 0x00080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
+ pcic_writel(bcr1, SH4_PCIBCR1);
+
+ mcr = ioread32(bcr + SH7751_MCR);
+ mcr &= (~PCIMCR_MRSET) & (~PCIMCR_RFSH);
+ pcic_writel(mcr, SH4_PCIMCR);
+
+ pcic_writel(0x0c000000, PCI_BASE_ADDRESS_1);
+ pcic_writel(0xd0000000, PCI_BASE_ADDRESS_2);
+ pcic_writel(0x0c000000, SH4_PCILAR0);
+ pcic_writel(0x00000000, SH4_PCILAR1);
+}
+
+static void __init r2dplus_fixup(void __iomem *pci_reg_base, void __iomem *bcr)
+{
+ unsigned long bcr1, mcr;
+
+ bcr1 = ioread32(bcr + SH7751_BCR1);
+ bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
+ pcic_writel(bcr1, SH4_PCIBCR1);
+
+ /* Enable all interrupts, so we known what to fix */
+ pcic_writel(0x0000c3ff, SH4_PCIINTM);
+ pcic_writel(0x0000380f, SH4_PCIAINTM);
+
+ pcic_writel(0xfb900047, SH7751_PCICONF1);
+ pcic_writel(0xab000001, SH7751_PCICONF4);
+
+ mcr = ioread32(bcr + SH7751_MCR);
+ mcr &= (~PCIMCR_MRSET) & (~PCIMCR_RFSH);
+ pcic_writel(mcr, SH4_PCIMCR);
+
+ pcic_writel(0x0c000000, SH7751_PCICONF5);
+ pcic_writel(0xd0000000, SH7751_PCICONF6);
+ pcic_writel(0x0c000000, SH4_PCILAR0);
+ pcic_writel(0x00000000, SH4_PCILAR1);
+}
+
+/*
+ * Direct access to PCI hardware...
+ */
+#define CONFIG_CMD(bus, devfn, where) \
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+/*
+ * Functions for accessing PCI configuration space with type 1 accesses
+ */
+static void __iomem *sh7751_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ void __iomem *pci_reg_base = (void __iomem *)cfg->res.start;
+
+ pcic_writel(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+ return pci_reg_base + SH4_PCIPDR;
+}
+
+static const struct of_device_id fixup_of_match[] = {
+ { .compatible = "iodata,landisk-pci", .data = landisk_fixup, },
+ { .compatible = "renesas,r2dplus-pci", .data = r2dplus_fixup, },
+ { },
+};
+
+static const struct of_device_id sh7751_pci_of_match[] = {
+ { .compatible = "renesas,sh7751-pci", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sh7751_pci_of_match);
+
+static resource_size_t sh7751_align_resource(struct pci_dev *dev,
+ const struct resource *res,
+ resource_size_t start,
+ resource_size_t size,
+ resource_size_t align)
+{
+ if (res->flags & IORESOURCE_IO) {
+ if (start < PCIBIOS_MIN_IO + 0x1000)
+ start = PCIBIOS_MIN_IO + 0x1000;
+
+ /*
+ * Put everything into 0x00-0xff region modulo 0x400.
+ */
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+ }
+
+ return start;
+}
+
+static void __init set_pci_bcr(void __iomem *pci_reg_base,
+ void __iomem *bcr,
+ unsigned int area)
+{
+ unsigned long word;
+
+ word = ioread32(bcr + SH7751_BCR1);
+ /* check BCR for SDRAM in area */
+ if (((word >> area) & 1) == 0) {
+ pr_info("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
+ area, word);
+ return;
+ }
+ pcic_writel(word, SH4_PCIBCR1);
+
+ word = ioread16(bcr + SH7751_BCR2);
+ /* check BCR2 for 32bit SDRAM interface*/
+ if (((word >> (area << 1)) & 0x3) != 0x3) {
+ pr_info("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
+ area, word);
+ return;
+ }
+ pcic_writel(word, SH4_PCIBCR2);
+}
+
+static __init int sh7751_cfg_init(struct device *dev,
+ struct pci_config_window *cfg)
+{
+ cfg->priv = sh7751_align_resource;
+ return 0;
+}
+
+static struct pci_ecam_ops ecm_ops __initdata = {
+ .init = sh7751_cfg_init,
+ .pci_ops = {
+ .read = pci_generic_config_read32,
+ .write = pci_generic_config_write32,
+ .map_bus = sh7751_map_bus,
+ }
+};
+
+static __init int sh7751_pci_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ u32 id;
+ u32 reg, word;
+ void __iomem *pci_reg_base;
+ void __iomem *bcr;
+ const struct of_device_id *match;
+ void (*fixup_fn)(void __iomem *pci_reg_base, void __iomem *bcr);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pci_reg_base = ioremap(res->start, resource_size(res));
+ if (IS_ERR(pci_reg_base))
+ return PTR_ERR(pci_reg_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ bcr = ioremap(res->start, resource_size(res));
+ if (IS_ERR(bcr))
+ return PTR_ERR(bcr);
+
+ /* check for SH7751/SH7751R hardware */
+ id = pcic_readl(PCI_VENDOR_ID);
+ if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
+ id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
+ pr_warn("PCI: This is not an SH7751(R)\n");
+ return -ENODEV;
+ }
+ dev_info(&pdev->dev, "PCI core found at %pR\n",
+ pci_reg_base);
+
+ /* Set the BCRs to enable PCI access */
+ reg = ioread32(bcr);
+ reg |= 0x80000;
+ iowrite32(reg, bcr);
+
+ /* Turn the clocks back on (not done in reset)*/
+ pcic_writel(0, SH4_PCICLKR);
+ /* Clear Powerdown IRQs (not done in reset) */
+ word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
+ pcic_writel(word, SH4_PCIPINT);
+
+ /* set the command/status bits to:
+ * Wait Cycle Control + Parity Enable + Bus Master +
+ * Mem space enable
+ */
+ word = PCI_COMMAND_WAIT | PCI_COMMAND_PARITY |
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pcic_writel(word, PCI_COMMAND);
+
+ /* define this host as the host bridge */
+ word = PCI_BASE_CLASS_BRIDGE << 24;
+ pcic_writel(word, PCI_CLASS_REVISION);
+
+ /* Set IO and Mem windows to local address
+ * Make PCI and local address the same for easy 1 to 1 mapping
+ */
+ word = memory_end - memory_start - 1;
+ pcic_writel(word, SH4_PCILSR0);
+ /* Set the values on window 0 PCI config registers */
+ word = P2SEGADDR(__pa(memory_start));
+ pcic_writel(word, SH4_PCILAR0);
+ pcic_writel(word, PCI_BASE_ADDRESS_1);
+
+ set_pci_bcr(pci_reg_base, bcr, (__pa(memory_start) >> 27) & 0x07);
+
+ /* configure the wait control registers */
+ word = ioread32(bcr + SH7751_WCR1);
+ pcic_writel(word, SH4_PCIWCR1);
+ word = ioread32(bcr + SH7751_WCR2);
+ pcic_writel(word, SH4_PCIWCR2);
+ word = ioread32(bcr + SH7751_WCR3);
+ pcic_writel(word, SH4_PCIWCR3);
+ word = ioread32(bcr + SH7751_MCR);
+ pcic_writel(word, SH4_PCIMCR);
+
+ match = of_match_node(fixup_of_match, pdev->dev.of_node);
+ if (match) {
+ fixup_fn = match->data;
+ fixup_fn(pci_reg_base, bcr);
+ }
+ /*
+ * SH7751 init done, set central function init complete
+ * use round robin mode to stop a device starving/overruning
+ */
+ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
+ pcic_writel(word, SH4_PCICR);
+
+ return pci_host_common_probe(pdev, &ecm_ops);
+}
+
+static __refdata struct platform_driver sh7751_pci_driver = {
+ .driver = {
+ .name = "sh7751-pci",
+ .of_match_table = sh7751_pci_of_match,
+ },
+ .probe = sh7751_pci_probe,
+};
+builtin_platform_driver(sh7751_pci_driver);
--
2.7.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v3 11/19] sh: Add PCI host bridge driver for SH7751
2016-06-28 6:36 ` [PATCH v3 11/19] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
@ 2016-06-28 21:05 ` Rob Herring
0 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2016-06-28 21:05 UTC (permalink / raw)
To: Yoshinori Sato
Cc: linux-pci, devicetree, linux-sh, linux-kernel, 27, Jun, 2016,
+0900
On Tue, Jun 28, 2016 at 03:36:27PM +0900, Yoshinori Sato wrote:
> This is an alternative SH7751 PCI driver.
> Existing driver (arch/sh/drivers/pci/pci-sh7751) uses SH specific interface.
> But this driver uses common PCI interface. It is more modern and generic.
>
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
> .../devicetree/bindings/pci/sh7751-pci.txt | 51 ++++
> arch/sh/boards/Kconfig | 1 +
> arch/sh/drivers/Makefile | 2 +
> arch/sh/include/asm/io.h | 6 +
> drivers/pci/host/Kconfig | 7 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pci-sh7751.c | 326 +++++++++++++++++++++
> 7 files changed, 394 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/sh7751-pci.txt
> create mode 100644 drivers/pci/host/pci-sh7751.c
>
> diff --git a/Documentation/devicetree/bindings/pci/sh7751-pci.txt b/Documentation/devicetree/bindings/pci/sh7751-pci.txt
> new file mode 100644
> index 0000000..c3ec71a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/sh7751-pci.txt
> @@ -0,0 +1,51 @@
> +* Renesas SH7751 PCI host interfaces
> +
> +Required properties:
> + - compatible: "renesas,sh7751-pci" is required.
> + And board specific compatible if fixup required.
> +
> + - reg: base address and length of the PCI controller registers.
Need to define how many reg entries and the order.
> + - #address-cells: set to <2>
> + - #size-cells: set to <1>
> + - bus-range: PCI bus numbers covered
> + - device_type: set to "pci"
> + - ranges: ranges for the PCI memory and I/O regions.
> + - interrupt-map-mask and interrupt-map: standard PCI properties
> + to define the mapping of the PCI interface to interrupt
> + numbers.
> +
> +Example:
> + pci: pci-controller@fe200000 {
> + compatible = "renesas,sh7751-pci", "iodata,landisk";
> + device_type = "pci";
> + bus-range = <0 0>;
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>,
> + <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>;
> + reg = <0xfe200000 0x0400>,
> + <0x0c000000 0x04000000>,
> + <0xff800000 0x0030>;
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0x1800 0 7>;
> + interrupt-map = <0x0000 0 1 &cpldintc evt2irq(0x2a0) 0
> + 0x0000 0 2 &cpldintc evt2irq(0x2c0) 0
> + 0x0000 0 3 &cpldintc evt2irq(0x2e0) 0
> + 0x0000 0 4 &cpldintc evt2irq(0x300) 0
> +
> + 0x0800 0 1 &cpldintc evt2irq(0x2c0) 0
> + 0x0800 0 2 &cpldintc evt2irq(0x2e0) 0
> + 0x0800 0 3 &cpldintc evt2irq(0x300) 0
> + 0x0800 0 4 &cpldintc evt2irq(0x2a0) 0
> +
> + 0x1000 0 1 &cpldintc evt2irq(0x2e0) 0
> + 0x1000 0 2 &cpldintc evt2irq(0x300) 0
> + 0x1000 0 3 &cpldintc evt2irq(0x2a0) 0
> + 0x1000 0 4 &cpldintc evt2irq(0x2c0) 0
> +
> + 0x1800 0 1 &cpldintc evt2irq(0x300) 0
> + 0x1800 0 2 &cpldintc evt2irq(0x2a0) 0
> + 0x1800 0 3 &cpldintc evt2irq(0x2c0) 0
> + 0x1800 0 4 &cpldintc evt2irq(0x2e0) 0>;
> + };
> +};
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 12/19] sh: irqchip: SH7751 IRQCHIP Driver
[not found] <1467095795-5082-1-git-send-email-ysato@users.sourceforge.jp>
2016-06-28 6:36 ` [PATCH v3 10/19] sh: SH7750/51 CPG Driver Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 11/19] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
@ 2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 7:55 ` Geert Uytterhoeven
2016-06-28 6:36 ` [PATCH v3 13/19] sh: SH7751 core dtsi Yoshinori Sato
` (2 subsequent siblings)
5 siblings, 1 reply; 13+ messages in thread
From: Yoshinori Sato @ 2016-06-28 6:36 UTC (permalink / raw)
To: devicetree, linux-sh; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Rob Herring <robh@kernel.org>
---
.../interrupt-controller/renesas,sh7751-intc.txt | 25 ++++
arch/sh/Kconfig | 6 +-
arch/sh/boards/Kconfig | 1 +
drivers/irqchip/Kconfig | 5 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-renesas-sh7751.c | 141 +++++++++++++++++++++
6 files changed, 176 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.txt
create mode 100644 drivers/irqchip/irq-renesas-sh7751.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.txt
new file mode 100644
index 0000000..2bc6f22f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.txt
@@ -0,0 +1,25 @@
+DT bindings for the SH7751 interrupt controller
+
+Required properties:
+
+ - compatible: has to be "renesas,sh7751-intc".
+
+ - reg: Base address and length of interrupt controller register
+ and extend register.
+
+ - interrupt-controller: Identifies the node as an interrupt controller.
+
+ - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined
+ in interrupts.txt in this directory.
+
+Example
+-------
+
+ shintc: interrupt-controller@ffd00000 {
+ compatible = "renesas,sh7751-intc";
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0xffd00000 14>, <0xfe080000 128>;
+ };
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d06cac1..fee4333 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -29,7 +29,7 @@ config SUPERH
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_REGS_AND_STACK_ACCESS_API
- select MAY_HAVE_SPARSE_IRQ
+ select MAY_HAVE_SPARSE_IRQ if !SH_DEVICE_TREE
select IRQ_FORCED_THREADING
select RTC_LIB
select GENERIC_ATOMIC64
@@ -69,7 +69,7 @@ config SUPERH32
select HAVE_MIXED_BREAKPOINTS_REGS
select PERF_EVENTS
select ARCH_HIBERNATION_POSSIBLE if MMU
- select SPARSE_IRQ
+ select SPARSE_IRQ if !SH_DEVICE_TREE
select HAVE_CC_STACKPROTECTOR
config SUPERH64
@@ -863,7 +863,7 @@ config PCI
depends on SYS_SUPPORTS_PCI
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
- select NO_GENERIC_PCI_IOPORT_MAP
+ select NO_GENERIC_PCI_IOPORT_MAP if !SH_DEVICE_TREE
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index cfde921..d33ae46 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -15,6 +15,7 @@ config SH_DEVICE_TREE
select GENERIC_IOMAP
select COMMON_CLK
select SYS_SUPPORTS_PCI
+ select GENERIC_IRQ_CHIP
help
Select Board Described by Device Tree to build a kernel that
does not hard-code any board-specific knowledge but instead uses
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index fa33c50..fd7f842 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -251,6 +251,11 @@ config LS_SCFG_MSI
depends on PCI && PCI_MSI
select PCI_MSI_IRQ_DOMAIN
+config RENESAS_SH_INTC
+ def_bool y if SH_DEVICE_TREE
+ select IRQ_DOMAIN
+ select IRQ_DOMAIN_HIERARCHY
+
config PARTITION_PERCPU
bool
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 38853a1..2ab5735 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -69,3 +69,4 @@ obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
+obj-$(CONFIG_RENESAS_SH_INTC) += irq-renesas-sh7751.o
diff --git a/drivers/irqchip/irq-renesas-sh7751.c b/drivers/irqchip/irq-renesas-sh7751.c
new file mode 100644
index 0000000..1710978
--- /dev/null
+++ b/drivers/irqchip/irq-renesas-sh7751.c
@@ -0,0 +1,141 @@
+/*
+ * SH7751 interrupt contoller driver
+ *
+ * Copyright 2016 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+static struct sh7751_intc_regs {
+ void *icr;
+ void *ipr;
+ void *intpri00;
+ void *intreq00;
+ void *intmsk00;
+ void *intmskclr00;
+} sh7751_regs;
+
+static const unsigned int ipr_table[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 0 - 7 */
+ 0x41, 0xff, 0xff, 0x40, 0xff, 0xff, 0xff, 0xff, /* 8 - 15 */
+ 0x03, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x11, /* 16 - 23 */
+ 0x11, 0x11, 0x11, 0x13, 0x12, 0x12, 0xff, 0xff, /* 24 - 31 */
+ 0x30, 0x33, 0x32, 0x32, 0x32, 0x32, 0x32, 0x21, /* 32 - 39 */
+ 0x21, 0x21, 0x21, 0x21, 0x32, 0x32, 0x32, 0x32, /* 40 - 47 */
+ 0xff, 0xff, 0xff, 0x40, 0xff, 0xff, 0xff, 0xff, /* 48 - 55 */
+ 0xff, 0xff, 0xff, 0x40, 0xff, 0xff, 0xff, 0xff, /* 56 - 63 */
+};
+
+static const unsigned int pri_table[] = {
+ 0, 4, 4, 4, 4, 4, 4, 4,
+ 8, 32, 32, 32, 12, 32, 32, 32,
+};
+
+static void sh_disable_irq(struct irq_data *data)
+{
+ int pos;
+ unsigned int addr;
+ unsigned long pri;
+ int irq = data->irq;
+ struct sh7751_intc_regs *reg = data->chip_data;
+
+ if (irq < 64) {
+ if (ipr_table[irq] != 0xff) {
+ addr = (ipr_table[irq] & 0xf0) >> 2;
+ pos = (ipr_table[irq] & 0x0f) << 4;
+ pri = ~(0x000f << pos);
+ pri &= __raw_readw(reg->ipr + addr);
+ __raw_writew(pri, reg->ipr + addr);
+ }
+ } else {
+ if (pri_table[irq - 64] < 32) {
+ pos = pri_table[irq - 64];
+ pri = ~(0x000f << pos);
+ pri &= __raw_readw(reg->intpri00);
+ __raw_writew(pri, reg->intpri00);
+ }
+ }
+}
+
+static void sh_enable_irq(struct irq_data *data)
+{
+ int pos;
+ unsigned int addr;
+ unsigned long pri;
+ int irq = data->irq;
+ struct sh7751_intc_regs *reg = data->chip_data;
+
+ if (irq < 64) {
+ if (ipr_table[irq] != 0xff) {
+ addr = (ipr_table[irq] & 0xf0) >> 2;
+ pos = (ipr_table[irq] & 0x0f) * 4;
+ pri = ~(0x000f << pos);
+ pri &= __raw_readw(reg->ipr + addr);
+ pri |= 1 << pos;
+ __raw_writew(pri, reg->ipr + addr);
+ }
+ } else {
+ if (pri_table[irq - 64] < 32) {
+ pos = pri_table[irq - 64];
+ pri = ~(0x000f << pos);
+ pri &= __raw_readw(reg->intpri00);
+ pri |= 1 << pos;
+ __raw_writew(pri, reg->intpri00);
+ }
+ }
+}
+
+static struct irq_chip sh_irq_chip = {
+ .name = "SH-IPR",
+ .irq_unmask = sh_enable_irq,
+ .irq_mask = sh_disable_irq,
+};
+
+static __init int irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &sh_irq_chip, handle_level_irq);
+ irq_get_irq_data(virq)->chip_data = h->host_data;
+ irq_modify_status(virq, IRQ_NOREQUEST, IRQ_NOPROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops irq_ops = {
+ .map = irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int __init sh_intc_7751_init(struct device_node *intc,
+ struct device_node *parent)
+{
+ struct irq_domain *domain;
+ void *intc_baseaddr;
+ void *intc_baseaddr2;
+
+ intc_baseaddr = of_iomap(intc, 0);
+ intc_baseaddr2 = of_iomap(intc, 1);
+ if (!intc_baseaddr || !intc_baseaddr2)
+ panic("INTC regsiter not defined");
+
+ sh7751_regs.icr = intc_baseaddr;
+ sh7751_regs.ipr = intc_baseaddr + 4;
+ sh7751_regs.intpri00 = intc_baseaddr2;
+ sh7751_regs.intreq00 = intc_baseaddr2 + 0x20;
+ sh7751_regs.intmsk00 = intc_baseaddr2 + 0x40;
+ sh7751_regs.intmskclr00 = intc_baseaddr2 + 0x60;
+
+ domain = irq_domain_add_linear(intc, NR_IRQS, &irq_ops, &sh7751_regs);
+ if (!domain)
+ panic("%s: unable to create IRQ domain\n", intc->full_name);
+
+ irq_set_default_host(domain);
+ return 0;
+}
+
+IRQCHIP_DECLARE(sh_7751_intc, "renesas,sh7751-intc", sh_intc_7751_init);
--
2.7.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v3 12/19] sh: irqchip: SH7751 IRQCHIP Driver
2016-06-28 6:36 ` [PATCH v3 12/19] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato
@ 2016-06-28 7:55 ` Geert Uytterhoeven
0 siblings, 0 replies; 13+ messages in thread
From: Geert Uytterhoeven @ 2016-06-28 7:55 UTC (permalink / raw)
To: Yoshinori Sato; +Cc: devicetree@vger.kernel.org, Linux-sh list
Hi Sato-san,
On Tue, Jun 28, 2016 at 8:36 AM, Yoshinori Sato
<ysato@users.sourceforge.jp> wrote:
> index 0000000..2bc6f22f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,sh7751-intc.txt
> @@ -0,0 +1,25 @@
> +DT bindings for the SH7751 interrupt controller
> +
> +Required properties:
> +
> + - compatible: has to be "renesas,sh7751-intc".
> +
> + - reg: Base address and length of interrupt controller register
> + and extend register.
> +
> + - interrupt-controller: Identifies the node as an interrupt controller.
> +
> + - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined
> + in interrupts.txt in this directory.
> +
> +Example
> +-------
> +
> + shintc: interrupt-controller@ffd00000 {
> + compatible = "renesas,sh7751-intc";
> + #interrupt-cells = <2>;
> + #address-cells = <1>;
> + #size-cells = <1>;
Why do you need #address-cells and #size-cells?
> + interrupt-controller;
> + reg = <0xffd00000 14>, <0xfe080000 128>;
> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 13/19] sh: SH7751 core dtsi
[not found] <1467095795-5082-1-git-send-email-ysato@users.sourceforge.jp>
` (2 preceding siblings ...)
2016-06-28 6:36 ` [PATCH v3 12/19] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato
@ 2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 19/19] sh: Renesas R0P751RLC0011RL (a.k.a R2Dplus) support Yoshinori Sato
5 siblings, 0 replies; 13+ messages in thread
From: Yoshinori Sato @ 2016-06-28 6:36 UTC (permalink / raw)
To: devicetree, linux-sh, linux-kernel; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/boot/dts/sh7751.dtsi | 85 ++++++++++++++++++++++
include/dt-bindings/clock/renesas-sh7750.h | 26 +++++++
include/dt-bindings/interrupt-controller/sh_intc.h | 2 +
3 files changed, 113 insertions(+)
create mode 100644 arch/sh/boot/dts/sh7751.dtsi
create mode 100644 include/dt-bindings/clock/renesas-sh7750.h
create mode 100644 include/dt-bindings/interrupt-controller/sh_intc.h
diff --git a/arch/sh/boot/dts/sh7751.dtsi b/arch/sh/boot/dts/sh7751.dtsi
new file mode 100644
index 0000000..07179b2
--- /dev/null
+++ b/arch/sh/boot/dts/sh7751.dtsi
@@ -0,0 +1,85 @@
+/*
+ * Device Tree Source for the SH7751
+ *
+ * Copyright (C) 2016 Yoshinori Sato
+ */
+
+#include <dt-bindings/interrupt-controller/sh_intc.h>
+#include <dt-bindings/clock/renesas-sh7750.h>
+
+/ {
+ oclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+ cpg: cpg@ffc00000 {
+ compatible = "renesas,sh7750-cpg";
+ clocks = <&oclk>;
+ #clock-cells = <1>;
+ renesas,mult = <12>;
+ reg = <0xffc00000 32>, <0xfe0a0000 16>;
+ };
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,sh4", "renesas,sh";
+ clock-frequency = <266666666>;
+ };
+ };
+ shintc: interrupt-controller@ffd00000 {
+ compatible = "renesas,sh7751-intc";
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0xffd00000 14>, <0xfe080000 128>;
+
+ };
+ sci0: serial@ffe00000 {
+ compatible = "renesas,sci";
+ reg = <0xffe00000 0x20>;
+ interrupts = <evt2irq(0x4e0) 0
+ evt2irq(0x500) 0
+ evt2irq(0x540) 0
+ evt2irq(0x520) 0>;
+ clocks = <&cpg SH7750_CLK_SCI>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ sci1: serial@ffe80000 {
+ compatible = "renesas,scif";
+ reg = <0xffe80000 0x100>;
+ interrupts = <evt2irq(0x700) 0
+ evt2irq(0x720) 0
+ evt2irq(0x760) 0
+ evt2irq(0x740) 0>;
+ clocks = <&cpg SH7750_CLK_SCIF>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ tmu: timer@ffd80000 {
+ compatible = "renesas,tmu";
+ reg = <0xffd80000 12>;
+ interrupts = <evt2irq(0x400) 0
+ evt2irq(0x420) 0
+ evt2irq(0x440) 0>;
+ clocks = <&cpg SH7750_CLK_TMU0>;
+ clock-names = "fck";
+ renesas,channels-mask = <0x03>;
+ };
+ pci: pci-controller@fe200000 {
+ compatible = "renesas,sh7751-pci";
+ device_type = "pci";
+ bus-range = <0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>,
+ <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>;
+ reg = <0xfe200000 0x0400>, <0xff800000 0x0030>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x1800 0 7>;
+ status = "disabled";
+ };
+};
\ No newline at end of file
diff --git a/include/dt-bindings/clock/renesas-sh7750.h b/include/dt-bindings/clock/renesas-sh7750.h
new file mode 100644
index 0000000..546c0b1
--- /dev/null
+++ b/include/dt-bindings/clock/renesas-sh7750.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2016 Yoshinori Sato
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__
+
+#define SH7750_CLK_SCI 0
+#define SH7750_CLK_RTC 1
+#define SH7750_CLK_TMU0 2
+#define SH7750_CLK_TMU1 3
+#define SH7750_CLK_TMU2 4
+#define SH7750_CLK_SCIF 5
+#define SH7750_CLK_DMAC 6
+#define SH7750_CLK_UBC 7
+#define SH7750_CLK_SQ 8
+#define SH7750_CLK_INTC 9
+#define SH7750_CLK_TMU3 10
+#define SH7750_CLK_TMU4 11
+#define SH7750_CLK_PCIC 12
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ */
diff --git a/include/dt-bindings/interrupt-controller/sh_intc.h b/include/dt-bindings/interrupt-controller/sh_intc.h
new file mode 100644
index 0000000..8c9dcdc
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/sh_intc.h
@@ -0,0 +1,2 @@
+#define evt2irq(evt) (((evt) >> 5) - 16)
+#define irq2evt(irq) (((irq) + 16) << 5)
--
2.7.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support
[not found] <1467095795-5082-1-git-send-email-ysato@users.sourceforge.jp>
` (3 preceding siblings ...)
2016-06-28 6:36 ` [PATCH v3 13/19] sh: SH7751 core dtsi Yoshinori Sato
@ 2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 7:51 ` Geert Uytterhoeven
2016-06-28 8:54 ` John Paul Adrian Glaubitz
2016-06-28 6:36 ` [PATCH v3 19/19] sh: Renesas R0P751RLC0011RL (a.k.a R2Dplus) support Yoshinori Sato
5 siblings, 2 replies; 13+ messages in thread
From: Yoshinori Sato @ 2016-06-28 6:36 UTC (permalink / raw)
To: linux-sh, devicetree, linux-kernel; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../interrupt-controller/iodata-landisk.txt | 34 ++++++++++
arch/sh/boot/dts/Makefile | 2 +
arch/sh/boot/dts/landisk.dts | 62 ++++++++++++++++++
drivers/irqchip/Makefile | 2 +-
drivers/irqchip/irq-io-landisk.c | 73 ++++++++++++++++++++++
5 files changed, 172 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
create mode 100644 arch/sh/boot/dts/landisk.dts
create mode 100644 drivers/irqchip/irq-io-landisk.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
new file mode 100644
index 0000000..9f87f2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
@@ -0,0 +1,34 @@
+DT bindings for the I/O DATA HDL-U interrupt controller
+
+Required properties:
+
+ - compatible: has to be "iodata,landisk-intc".
+
+ - reg: Base address and length of interrupt controller register.
+
+ - interrupt-controller: Identifies the node as an interrupt controller.
+
+ - #address-cells: has to be <0>.
+
+ - #interrupt-cells: has to be <1>: an interrupt index.
+
+ - interrupt-map: Interrupt mapping on parent controller.
+
+Example
+-------
+
+ cpldintc: cpld@b0000000 {
+ compatible = "iodata,landisk-intc";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0xb0000000 8>;
+ interrupt-map=<0 &shintc evt2irq(0x2a0)>,
+ <1 &shintc evt2irq(0x2c0)>,
+ <2 &shintc evt2irq(0x2e0)>,
+ <3 &shintc evt2irq(0x300)>,
+ <4 &shintc evt2irq(0x320)>,
+ <5 &shintc evt2irq(0x340)>,
+ <6 &shintc evt2irq(0x360)>,
+ <7 &shintc evt2irq(0x380)>;
+ };
diff --git a/arch/sh/boot/dts/Makefile b/arch/sh/boot/dts/Makefile
index 38fdc38..cf5aec4 100644
--- a/arch/sh/boot/dts/Makefile
+++ b/arch/sh/boot/dts/Makefile
@@ -1,5 +1,7 @@
obj-$(CONFIG_USE_BUILTIN_DTB) += $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_SOURCE)).dtb.o
+dtb-y += landisk.dtb
+
dtstree := $(srctree)/$(src)
clean-files := *.dtb.S
always := $(dtb-y)
diff --git a/arch/sh/boot/dts/landisk.dts b/arch/sh/boot/dts/landisk.dts
new file mode 100644
index 0000000..240d11b
--- /dev/null
+++ b/arch/sh/boot/dts/landisk.dts
@@ -0,0 +1,62 @@
+/dts-v1/;
+
+#include "sh7751.dtsi"
+
+/ {
+ model = "I/O DATA HDL-U";
+ compatible = "iodata,hdl-u";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&shintc>;
+ chosen {
+ stdout-path = &sci1;
+ bootargs = "console=ttySC1,115200";
+ };
+ aliases {
+ serial0 = &sci0;
+ serial1 = &sci1;
+ };
+
+ memory@0c000000 {
+ device_type = "memory";
+ reg = <0x0c000000 0x4000000>;
+ };
+ cpldintc: cpld@b0000000 {
+ compatible = "iodata,landisk-intc";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0xb0000000 8>;
+ interrupt-map=<0 &shintc evt2irq(0x2a0)>,
+ <1 &shintc evt2irq(0x2c0)>,
+ <2 &shintc evt2irq(0x2e0)>,
+ <3 &shintc evt2irq(0x300)>,
+ <4 &shintc evt2irq(0x320)>,
+ <5 &shintc evt2irq(0x340)>,
+ <6 &shintc evt2irq(0x360)>,
+ <7 &shintc evt2irq(0x380)>;
+ };
+};
+
+&oclk {
+ clock-frequency = <22222222>;
+};
+
+&sci0 {
+ status = "ok";
+};
+
+&sci1 {
+ status = "ok";
+};
+
+&pci {
+ compatible = "renesas,sh7751-pci", "iodata,landisk-pci";
+ interrupt-map-mask = <0x1800 0 7>;
+ interrupt-map = <0x0000 0 1 &cpldintc 0>,
+ <0x0800 0 1 &cpldintc 1>,
+ <0x1000 0 1 &cpldintc 2>,
+ <0x1000 0 2 &cpldintc 3>,
+ <0x1000 0 3 &cpldintc 0>;
+ status = "ok";
+};
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 2ab5735..5e225cf 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -69,4 +69,4 @@ obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
-obj-$(CONFIG_RENESAS_SH_INTC) += irq-renesas-sh7751.o
+obj-$(CONFIG_RENESAS_SH_INTC) += irq-renesas-sh7751.o irq-io-landisk.o
diff --git a/drivers/irqchip/irq-io-landisk.c b/drivers/irqchip/irq-io-landisk.c
new file mode 100644
index 0000000..73419a2
--- /dev/null
+++ b/drivers/irqchip/irq-io-landisk.c
@@ -0,0 +1,73 @@
+/*
+ * IO-DATA LANDISK CPLD IRQ driver
+ *
+ * Copyright 2016 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+static void landisk_mask_irq(struct irq_data *data)
+{
+ u8 mask = __raw_readb(data->chip_data + 5);
+
+ mask &= ~(1 << (data->irq - 5));
+ __raw_writeb(mask, data->chip_data + 5);
+}
+
+static void landisk_unmask_irq(struct irq_data *data)
+{
+ u8 mask = __raw_readb(data->chip_data + 5);
+
+ mask |= (1 << (data->irq - 5));
+ __raw_writeb(mask, data->chip_data + 5);
+}
+
+static struct irq_chip cpld_irq_chip = {
+ .name = "LANDISK-CPLD",
+ .irq_unmask = landisk_unmask_irq,
+ .irq_mask = landisk_mask_irq,
+};
+
+static int cpld_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &cpld_irq_chip,
+ handle_simple_irq);
+ irq_set_chip_data(virq, d->host_data);
+
+ return 0;
+}
+
+static struct irq_domain_ops irq_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = cpld_map,
+};
+
+static int __init landisk_intc_of_init(struct device_node *intc,
+ struct device_node *parent)
+{
+ struct irq_domain *domain, *pdomain;
+ int num_irqpin;
+ void *baseaddr;
+
+ baseaddr = of_iomap(intc, 0);
+ pdomain = irq_find_host(parent);
+ of_get_property(intc, "interrupt-map", &num_irqpin);
+ num_irqpin /= sizeof(u32) * 3;
+ printk("%s %d\n", __func__, num_irqpin);
+ domain = irq_domain_create_hierarchy(pdomain, 0, num_irqpin,
+ of_node_to_fwnode(intc),
+ &irq_ops, baseaddr);
+ if (!domain)
+ panic("%s: unable to create IRQ domain\n", intc->full_name);
+ irq_domain_associate_many(domain, 5, 0, 8);
+ return 0;
+}
+
+IRQCHIP_DECLARE(cpld_intc, "iodata,landisk-intc", landisk_intc_of_init);
--
2.7.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support
2016-06-28 6:36 ` [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support Yoshinori Sato
@ 2016-06-28 7:51 ` Geert Uytterhoeven
2016-06-28 15:06 ` Yoshinori Sato
2016-06-28 8:54 ` John Paul Adrian Glaubitz
1 sibling, 1 reply; 13+ messages in thread
From: Geert Uytterhoeven @ 2016-06-28 7:51 UTC (permalink / raw)
To: Yoshinori Sato
Cc: Linux-sh list, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Hi Sato-san,
On Tue, Jun 28, 2016 at 8:36 AM, Yoshinori Sato
<ysato@users.sourceforge.jp> wrote:
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
> .../interrupt-controller/iodata-landisk.txt | 34 ++++++++++
> arch/sh/boot/dts/Makefile | 2 +
> arch/sh/boot/dts/landisk.dts | 62 ++++++++++++++++++
> drivers/irqchip/Makefile | 2 +-
> drivers/irqchip/irq-io-landisk.c | 73 ++++++++++++++++++++++
> 5 files changed, 172 insertions(+), 1 deletion(-)
This needs to be split in two (or three) patches:
- irqchip driver and DT
- arch/sh
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> create mode 100644 arch/sh/boot/dts/landisk.dts
> create mode 100644 drivers/irqchip/irq-io-landisk.c
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> new file mode 100644
> index 0000000..9f87f2c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> @@ -0,0 +1,34 @@
> +DT bindings for the I/O DATA HDL-U interrupt controller
> +
> +Required properties:
> +
> + - compatible: has to be "iodata,landisk-intc".
> +
> + - reg: Base address and length of interrupt controller register.
> +
> + - interrupt-controller: Identifies the node as an interrupt controller.
> +
> + - #address-cells: has to be <0>.
Why do you need #address-cells? There are no subnodes.
> +
> + - #interrupt-cells: has to be <1>: an interrupt index.
> +
> + - interrupt-map: Interrupt mapping on parent controller.
> --- /dev/null
> +++ b/arch/sh/boot/dts/landisk.dts
> @@ -0,0 +1,62 @@
> +/dts-v1/;
> +
> +#include "sh7751.dtsi"
> +
> +/ {
> + model = "I/O DATA HDL-U";
> + compatible = "iodata,hdl-u";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&shintc>;
> + chosen {
> + stdout-path = &sci1;
> + bootargs = "console=ttySC1,115200";
The console= parameter can be removed from bootargs.
You can specify the console speed using
stdout-path = "&sci1:115200";
> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support
2016-06-28 7:51 ` Geert Uytterhoeven
@ 2016-06-28 15:06 ` Yoshinori Sato
0 siblings, 0 replies; 13+ messages in thread
From: Yoshinori Sato @ 2016-06-28 15:06 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Linux-sh list, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
On Tue, 28 Jun 2016 16:51:25 +0900,
Geert Uytterhoeven wrote:
>
> Hi Sato-san,
>
> On Tue, Jun 28, 2016 at 8:36 AM, Yoshinori Sato
> <ysato@users.sourceforge.jp> wrote:
> > Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> > ---
> > .../interrupt-controller/iodata-landisk.txt | 34 ++++++++++
> > arch/sh/boot/dts/Makefile | 2 +
> > arch/sh/boot/dts/landisk.dts | 62 ++++++++++++++++++
> > drivers/irqchip/Makefile | 2 +-
> > drivers/irqchip/irq-io-landisk.c | 73 ++++++++++++++++++++++
> > 5 files changed, 172 insertions(+), 1 deletion(-)
>
> This needs to be split in two (or three) patches:
> - irqchip driver and DT
> - arch/sh
OK.
> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> > create mode 100644 arch/sh/boot/dts/landisk.dts
> > create mode 100644 drivers/irqchip/irq-io-landisk.c
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> > new file mode 100644
> > index 0000000..9f87f2c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> > @@ -0,0 +1,34 @@
> > +DT bindings for the I/O DATA HDL-U interrupt controller
> > +
> > +Required properties:
> > +
> > + - compatible: has to be "iodata,landisk-intc".
> > +
> > + - reg: Base address and length of interrupt controller register.
> > +
> > + - interrupt-controller: Identifies the node as an interrupt controller.
> > +
> > + - #address-cells: has to be <0>.
>
> Why do you need #address-cells? There are no subnodes.
Ouch.
I forgot remove line.
Thanks.
> > +
> > + - #interrupt-cells: has to be <1>: an interrupt index.
> > +
> > + - interrupt-map: Interrupt mapping on parent controller.
>
> > --- /dev/null
> > +++ b/arch/sh/boot/dts/landisk.dts
> > @@ -0,0 +1,62 @@
> > +/dts-v1/;
> > +
> > +#include "sh7751.dtsi"
> > +
> > +/ {
> > + model = "I/O DATA HDL-U";
> > + compatible = "iodata,hdl-u";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + interrupt-parent = <&shintc>;
> > + chosen {
> > + stdout-path = &sci1;
> > + bootargs = "console=ttySC1,115200";
>
> The console= parameter can be removed from bootargs.
> You can specify the console speed using
>
> stdout-path = "&sci1:115200";
>
> > + };
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support
2016-06-28 6:36 ` [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support Yoshinori Sato
2016-06-28 7:51 ` Geert Uytterhoeven
@ 2016-06-28 8:54 ` John Paul Adrian Glaubitz
1 sibling, 0 replies; 13+ messages in thread
From: John Paul Adrian Glaubitz @ 2016-06-28 8:54 UTC (permalink / raw)
To: Yoshinori Sato, linux-sh, devicetree, linux-kernel
On 06/28/2016 08:36 AM, Yoshinori Sato wrote:
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
In case you want to use the subject of this mail for the commit message, there
is a typo: It should be "a.k.a.", not "a,k.a".
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 19/19] sh: Renesas R0P751RLC0011RL (a.k.a R2Dplus) support
[not found] <1467095795-5082-1-git-send-email-ysato@users.sourceforge.jp>
` (4 preceding siblings ...)
2016-06-28 6:36 ` [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support Yoshinori Sato
@ 2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 7:54 ` Geert Uytterhoeven
5 siblings, 1 reply; 13+ messages in thread
From: Yoshinori Sato @ 2016-06-28 6:36 UTC (permalink / raw)
To: devicetree, linux-sh, linux-kernel; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
.../interrupt-controller/renesas-r2dplus.txt | 41 ++++++++++
arch/sh/boot/dts/Makefile | 1 +
arch/sh/boot/dts/r2dplus.dts | 84 +++++++++++++++++++++
drivers/irqchip/Makefile | 2 +-
drivers/irqchip/irq-renesas-r2dplus.c | 88 ++++++++++++++++++++++
5 files changed, 215 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt
create mode 100644 arch/sh/boot/dts/r2dplus.dts
create mode 100644 drivers/irqchip/irq-renesas-r2dplus.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt
new file mode 100644
index 0000000..ca2727e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt
@@ -0,0 +1,41 @@
+DT bindings for the Renesas R0P751RLC0011RL (R2Dplus) interrupt controller
+
+Required properties:
+
+ - compatible: has to be "renesas,r2dplus-intc".
+
+ - reg: Base address and length of interrupt controller register.
+
+ - interrupt-controller: Identifies the node as an interrupt controller.
+
+ - #address-cells: has to be <0>.
+
+ - #interrupt-cells: has to be <1>: an interrupt index.
+
+ - interrupt-map: Interrupt mapping on parent controller.
+
+Example
+-------
+
+ fpgaintc: fpga@a4000000 {
+ compatible = "renesas,r2dplus-intc";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0xa4000000 0x40>;
+ interrupt-map=<0 &shintc evt2irq(0x200)>,
+ <1 &shintc evt2irq(0x220)>,
+ <2 &shintc evt2irq(0x240)>,
+ <3 &shintc evt2irq(0x260)>,
+ <4 &shintc evt2irq(0x280)>,
+ <5 &shintc evt2irq(0x2a0)>,
+ <6 &shintc evt2irq(0x2c0)>,
+ <7 &shintc evt2irq(0x2e0)>,
+ <8 &shintc evt2irq(0x300)>,
+ <9 &shintc evt2irq(0x320)>,
+ <10 &shintc evt2irq(0x340)>,
+ <11 &shintc evt2irq(0x360)>,
+ <12 &shintc evt2irq(0x380)>,
+ <13 &shintc evt2irq(0x3a0)>,
+ <14 &shintc evt2irq(0x3c0)>,
+ };
diff --git a/arch/sh/boot/dts/Makefile b/arch/sh/boot/dts/Makefile
index cf5aec4..e059ce2b 100644
--- a/arch/sh/boot/dts/Makefile
+++ b/arch/sh/boot/dts/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_USE_BUILTIN_DTB) += $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_SOURCE)).dtb.o
dtb-y += landisk.dtb
+otb-y += r2dplus.dtb
dtstree := $(srctree)/$(src)
clean-files := *.dtb.S
diff --git a/arch/sh/boot/dts/r2dplus.dts b/arch/sh/boot/dts/r2dplus.dts
new file mode 100644
index 0000000..32256f2
--- /dev/null
+++ b/arch/sh/boot/dts/r2dplus.dts
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include "sh7751.dtsi"
+
+/ {
+ model = "Renesas RTS7751R2D+";
+ compatible = "renesas,r2dplus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&shintc>;
+ chosen {
+ stdout-path = &sci1;
+ bootargs = "console=ttySC1,115200";
+ };
+ aliases {
+ serial1 = &sci1;
+ };
+
+ memory@0c000000 {
+ device_type = "memory";
+ reg = <0x0c000000 0x4000000>;
+ };
+ fpgaintc: fpga@a4000000 {
+ compatible = "renesas,r2dplus-intc";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0xa4000000 0x40>;
+ interrupt-map=<0 &shintc evt2irq(0x200)>,
+ <1 &shintc evt2irq(0x220)>,
+ <2 &shintc evt2irq(0x240)>,
+ <3 &shintc evt2irq(0x260)>,
+ <4 &shintc evt2irq(0x280)>,
+ <5 &shintc evt2irq(0x2a0)>,
+ <6 &shintc evt2irq(0x2c0)>,
+ <7 &shintc evt2irq(0x2e0)>,
+ <8 &shintc evt2irq(0x300)>,
+ <9 &shintc evt2irq(0x320)>,
+ <10 &shintc evt2irq(0x340)>,
+ <11 &shintc evt2irq(0x360)>,
+ <12 &shintc evt2irq(0x380)>,
+ <13 &shintc evt2irq(0x3a0)>,
+ <14 &shintc evt2irq(0x3c0)>;
+ };
+ pata: pata@b4001000 {
+ compatible = "ata-generic";
+ reg = <0xb4001000 0x10>, <0xb400080c 0x02>;
+ interrupt-parent = <&fpgaintc>;
+ interrupts = <1 0>;
+ reg-shift = <1>;
+ pio-mode = <0>;
+ };
+ sm501: display@13e00000 {
+ compatible = "smi,sm501";
+ reg = <0x10000000 0x13dfffff>, <0x13e00000 0x13ffffff>;
+ interrupt-parent = <&fpgaintc>;
+ interrupts = <4 0>;
+ mode = "640x480-16@60";
+ edid = [00 ff ff ff ff ff ff 00 04 21 00 00 00 00 00 00
+ 01 00 01 03 80 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 20 00 00 01 00 01 00 01 00 01 00 01 00
+ 01 00 01 00 01 00 f3 0d 7b 69 30 05 23 20 00 60
+ 02 00 80 e0 21 00 00 1e 00 00 00 10 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b7];
+ smi,devices = <1>;
+ };
+};
+
+&oclk {
+ clock-frequency = <60000000>;
+};
+
+&sci1 {
+ status = "ok";
+};
+
+&pci {
+ compatible = "renesas,sh7751-pci", "renesas.r2dplus-pci";
+ interrupt-map-mask = <0x1800 0 7>;
+ interrupt-map = <0x1000 0 1 &fpgaintc 3 0>;
+ status = "ok";
+};
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 5e225cf..1e0f1c3 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -69,4 +69,4 @@ obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
-obj-$(CONFIG_RENESAS_SH_INTC) += irq-renesas-sh7751.o irq-io-landisk.o
+obj-$(CONFIG_RENESAS_SH_INTC) += irq-renesas-sh7751.o irq-io-landisk.o irq-renesas-r2dplus.o
diff --git a/drivers/irqchip/irq-renesas-r2dplus.c b/drivers/irqchip/irq-renesas-r2dplus.c
new file mode 100644
index 0000000..3f80775
--- /dev/null
+++ b/drivers/irqchip/irq-renesas-r2dplus.c
@@ -0,0 +1,88 @@
+/*
+ * Renesas RTS7751R2D+ FPGA IRQ driver
+ *
+ * Copyright 2016 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+static const u16 mask_bit[] = {
+ BIT(11),
+ BIT(9),
+ BIT(8),
+ BIT(12),
+ BIT(10),
+ BIT(6),
+ BIT(5),
+ BIT(4),
+ BIT(7),
+ BIT(14),
+ BIT(13),
+ BIT(0),
+ BIT(15),
+};
+
+static void r2dplus_mask_irq(struct irq_data *data)
+{
+ u16 mask = __raw_readw(data->chip_data);
+
+ mask &= ~mask_bit[data->irq];
+ __raw_writew(mask, data->chip_data);
+}
+
+static void r2dplus_unmask_irq(struct irq_data *data)
+{
+ u16 mask = __raw_readw(data->chip_data);
+
+ mask |= mask_bit[data->irq];
+ __raw_writew(mask, data->chip_data);
+}
+
+static struct irq_chip fpga_irq_chip = {
+ .name = "R2DPLUS-FPGA",
+ .irq_unmask = r2dplus_unmask_irq,
+ .irq_mask = r2dplus_mask_irq,
+};
+
+static int fpga_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &fpga_irq_chip,
+ handle_simple_irq);
+ irq_set_chip_data(virq, d->host_data);
+
+ return 0;
+}
+
+static struct irq_domain_ops irq_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = fpga_map,
+};
+
+static int __init r2dplus_intc_of_init(struct device_node *intc,
+ struct device_node *parent)
+{
+ struct irq_domain *domain, *pdomain;
+ int num_irqpin;
+ void *baseaddr;
+
+ baseaddr = of_iomap(intc, 0);
+ pdomain = irq_find_host(parent);
+ of_get_property(intc, "interrupt-map", &num_irqpin);
+ num_irqpin /= sizeof(u32) * 3;
+ domain = irq_domain_create_hierarchy(pdomain, 0, num_irqpin,
+ of_node_to_fwnode(intc),
+ &irq_ops, baseaddr);
+ if (!domain)
+ panic("%s: unable to create IRQ domain\n", intc->full_name);
+ irq_domain_associate_many(domain, 0, 0, 16);
+ return 0;
+}
+
+IRQCHIP_DECLARE(cpld_intc, "renesas,r2dplus-intc", r2dplus_intc_of_init);
--
2.7.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v3 19/19] sh: Renesas R0P751RLC0011RL (a.k.a R2Dplus) support
2016-06-28 6:36 ` [PATCH v3 19/19] sh: Renesas R0P751RLC0011RL (a.k.a R2Dplus) support Yoshinori Sato
@ 2016-06-28 7:54 ` Geert Uytterhoeven
0 siblings, 0 replies; 13+ messages in thread
From: Geert Uytterhoeven @ 2016-06-28 7:54 UTC (permalink / raw)
To: Yoshinori Sato
Cc: devicetree@vger.kernel.org, Linux-sh list,
linux-kernel@vger.kernel.org
On Tue, Jun 28, 2016 at 8:36 AM, Yoshinori Sato
<ysato@users.sourceforge.jp> wrote:
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
> .../interrupt-controller/renesas-r2dplus.txt | 41 ++++++++++
> arch/sh/boot/dts/Makefile | 1 +
> arch/sh/boot/dts/r2dplus.dts | 84 +++++++++++++++++++++
> drivers/irqchip/Makefile | 2 +-
> drivers/irqchip/irq-renesas-r2dplus.c | 88 ++++++++++++++++++++++
> 5 files changed, 215 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas-r2dplus.txt
> create mode 100644 arch/sh/boot/dts/r2dplus.dts
> create mode 100644 drivers/irqchip/irq-renesas-r2dplus.c
Same comments as for landisk.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 13+ messages in thread