From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?Otto=20Kek=C3=A4l=C3=A4inen?= Subject: [PATCH] Fix spelling errors in Documentation/devicetree Date: Tue, 5 Jul 2016 11:48:26 +0300 Message-ID: <1467708506-18010-1-git-send-email-otto@seravo.fi> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: =?UTF-8?q?Otto=20Kek=C3=A4l=C3=A4inen?= List-Id: devicetree@vger.kernel.org Signed-off-by: Otto Kek=C3=A4l=C3=A4inen --- I sent this originally to trivial@, but they adviced to submit this dir= ectly to you. Please apply. Thank you! Documentation/device-mapper/dm-crypt.txt | 2 +- Documentation/device-mapper/verity.txt | 2 +- Documentation/devicetree/bindings/arm/l2c2x0.txt | 4 ++-- Documentation/devicetree/bindings/net/dsa/dsa.txt | 2 +- .../devicetree/bindings/powerpc/fsl/fman.txt | 4 ++-- .../devicetree/bindings/regmap/regmap.txt | 2 +- .../devicetree/bindings/serial/qcom,msm-uartdm.txt | 4 ++-- .../devicetree/bindings/sound/simple-card.txt | 2 +- Documentation/devicetree/bindings/spi/ti_qspi.txt | 2 +- .../bindings/timer/allwinner,sun5i-a13-hstimer.txt | 2 +- 10 files changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/d= evice-mapper/dm-crypt.txt index 692171f..1a03546 100644 --- a/Documentation/device-mapper/dm-crypt.txt +++ b/Documentation/device-mapper/dm-crypt.txt @@ -47,7 +47,7 @@ Parameters: = \ =20 <#opt_params> Number of optional parameters. If there are no optional parameters= , - the optional paramaters section can be skipped or #opt_params can = be zero. + the optional parameters section can be skipped or #opt_params can = be zero. Otherwise #opt_params is the number of following arguments. =20 Example of optional parameters section: diff --git a/Documentation/device-mapper/verity.txt b/Documentation/dev= ice-mapper/verity.txt index 89fd8f9..9822f1d 100644 --- a/Documentation/device-mapper/verity.txt +++ b/Documentation/device-mapper/verity.txt @@ -65,7 +65,7 @@ Construction Parameters =20 <#opt_params> Number of optional parameters. If there are no optional parameters= , - the optional paramaters section can be skipped or #opt_params can = be zero. + the optional parameters section can be skipped or #opt_params can = be zero. Otherwise #opt_params is the number of following arguments. =20 Example of optional parameters section: diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documen= tation/devicetree/bindings/arm/l2c2x0.txt index c453ab5..917199f 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.txt +++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt @@ -86,10 +86,10 @@ Optional properties: firmware) - arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forc= ibly disable), <1> (forcibly enable), property absent (OS specific behavi= or, - preferrably retain firmware settings) + preferably retain firmware settings) - arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disabl= e), <1> (forcibly enable), property absent (OS specific behavior, - preferrably retain firmware settings) + preferably retain firmware settings) =20 Example: =20 diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Docume= ntation/devicetree/bindings/net/dsa/dsa.txt index 9f4807f..eb13eaf 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -43,7 +43,7 @@ Each port children node must have the following manda= tory properties: Note that a port labelled "dsa" will imply checking for the uplink pha= ndle described below. =20 -Optionnal property: +Optional property: - link : Should be a list of phandles to another switch's DSA port. This property is only used when switches are being chained/cascaded together. This port is used as outgoing port diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/D= ocumentation/devicetree/bindings/powerpc/fsl/fman.txt index 55c2c03..df873d1 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt @@ -35,7 +35,7 @@ PROPERTIES Definition: Specifies the index of the FMan unit. =20 The cell-index value may be used by the SoC, to identify the - FMan unit in the SoC memory map. In the table bellow, + FMan unit in the SoC memory map. In the table below, there's a description of the cell-index use in each SoC: =20 - P1023: @@ -247,7 +247,7 @@ PROPERTIES =20 The cell-index value may be used by the FMan or the SoC, to identify the MAC unit in the FMan (or SoC) memory map. - In the tables bellow there's a description of the cell-index + In the tables below there's a description of the cell-index use, there are two tables, one describes the use of cell-index by the FMan, the second describes the use by the SoC: =20 diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Docu= mentation/devicetree/bindings/regmap/regmap.txt index 0127be3..873096b 100644 --- a/Documentation/devicetree/bindings/regmap/regmap.txt +++ b/Documentation/devicetree/bindings/regmap/regmap.txt @@ -14,7 +14,7 @@ architectures that typically run big-endian operating= systems be marked that way in the devicetree. =20 On SoCs that can be operated in both big-endian and little-endian -modes, with a single hardware switch controlling both the endianess +modes, with a single hardware switch controlling both the endianness of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS chips), "native-endian" is used to allow using the same device tree blob in both cases. diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.t= xt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt index 182777f..d5f73b8 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -28,10 +28,10 @@ Optional properties: - dma-names: Should contain "tx" for transmit and "rx" for receive cha= nnels - qcom,tx-crci: Identificator for Client Rate Control Interface = to be used with TX DMA channel. Required when using DMA for trans= mission - with UARTDM v1.3 and bellow. + with UARTDM v1.3 and below. - qcom,rx-crci: Identificator for Client Rate Control Interface = to be used with RX DMA channel. Required when using DMA for recep= tion - with UARTDM v1.3 and bellow. + with UARTDM v1.3 and below. =20 Note: Aliases may be defined to ensure the correct ordering of the UAR= Ts. The alias serialN will result in the UART being assigned port N. If a= ny diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/= Documentation/devicetree/bindings/sound/simple-card.txt index cf3979e..59d8628 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -30,7 +30,7 @@ Optional subnodes: sub-nodes. This container may be omitted when the card has only one DAI link. See the examples and the - section bellow. + section below. =20 Dai-link subnode properties and subnodes: =20 diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Docume= ntation/devicetree/bindings/spi/ti_qspi.txt index 50b14f6..e65fde4 100644 --- a/Documentation/devicetree/bindings/spi/ti_qspi.txt +++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt @@ -20,7 +20,7 @@ Optional properties: chipselect register and offset of that register. =20 NOTE: TI QSPI controller requires different pinmux and IODelay -paramaters for Mode-0 and Mode-3 operations, which needs to be set up = by +parameters for Mode-0 and Mode-3 operations, which needs to be set up = by the bootloader (U-Boot). Default configuration only supports Mode-0 operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be specified in the slave nodes of TI QSPI controller without appropriate diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a1= 3-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i= -a13-hstimer.txt index 27cfc7d..8d6e4fd 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstim= er.txt +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstim= er.txt @@ -9,7 +9,7 @@ Required properties: one) - clocks: phandle to the source clock (usually the AHB clock) =20 -Optionnal properties: +Optional properties: - resets: phandle to a reset controller asserting the timer =20 Example: --=20 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" i= n the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html