devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Iyappan Subramanian <isubramanian@apm.com>
To: davem@davemloft.net, netdev@vger.kernel.org, devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, patches@apm.com,
	matthias.bgg@gmail.com, andrew@lunn.ch, linux@armlinux.org.uk,
	Iyappan Subramanian <isubramanian@apm.com>
Subject: [PATCH v5 09/11] dtb: xgene: Add MDIO node
Date: Thu,  7 Jul 2016 16:02:57 -0700	[thread overview]
Message-ID: <1467932579-14320-10-git-send-email-isubramanian@apm.com> (raw)
In-Reply-To: <1467932579-14320-1-git-send-email-isubramanian@apm.com>

Added mdio node for mdio driver.  Also added phy-handle
reference to the ethernet nodes.

Removed unused mdio subnode within storm menet ethernet node.
Removed unused clock node from storm sgenet1.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Tested-by: Toan Le <toanle@apm.com>
Tested-by: Matthias Brugger <mbrugger@suse.com>
---
 arch/arm64/boot/dts/apm/apm-mustang.dts | 12 +++++++++++
 arch/arm64/boot/dts/apm/apm-storm.dtsi  | 36 ++++++++++++---------------------
 2 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index 44db32e..b7fb5d9 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -79,3 +79,15 @@
 &mmc0 {
 	status = "ok";
 };
+
+&mdio {
+	menet0phy: phy@3 {
+		reg = <0x3>;
+	};
+	sgenet0phy: phy@4 {
+		reg = <0x4>;
+	};
+	sgenet1phy: phy@5 {
+		reg = <0x5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 5147d76..a415b3a 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -237,20 +237,11 @@
 				clocks = <&socplldiv2 0>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
-				csr-mask = <0x3>;
+				csr-mask = <0xa>;
+				enable-mask = <0xf>;
 				clock-output-names = "sge0clk";
 			};
 
-			sge1clk: sge1clk@1f21c000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x1f21c000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				csr-mask = <0xc>;
-				clock-output-names = "sge1clk";
-			};
-
 			xge0clk: xge0clk@1f61c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
@@ -921,6 +912,14 @@
 			clocks = <&rtcclk 0>;
 		};
 
+		mdio: mdio@0x17020000 {
+			compatible = "apm,xgene-mdio-rgmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x17020000 0x0 0xd100>;
+			clocks = <&menetclk 0>;
+		};
+
 		menet: ethernet@17020000 {
 			compatible = "apm,xgene-enet";
 			status = "disabled";
@@ -934,17 +933,7 @@
 			/* mac address will be overwritten by the bootloader */
 			local-mac-address = [00 00 00 00 00 00];
 			phy-connection-type = "rgmii";
-			phy-handle = <&menetphy>;
-			mdio {
-				compatible = "apm,xgene-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				menetphy: menetphy@3 {
-					compatible = "ethernet-phy-id001c.c915";
-					reg = <0x3>;
-				};
-
-			};
+			phy-handle = <&menet0phy>;
 		};
 
 		sgenet0: ethernet@1f210000 {
@@ -960,6 +949,7 @@
 			clocks = <&sge0clk 0>;
 			local-mac-address = [00 00 00 00 00 00];
 			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet0phy>;
 		};
 
 		sgenet1: ethernet@1f210030 {
@@ -973,9 +963,9 @@
 				     <0x0 0xAD 0x4>;
 			port-id = <1>;
 			dma-coherent;
-			clocks = <&sge1clk 0>;
 			local-mac-address = [00 00 00 00 00 00];
 			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet1phy>;
 		};
 
 		xgenet: ethernet@1f610000 {
-- 
1.9.1

  parent reply	other threads:[~2016-07-07 23:02 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-07 23:02 [PATCH v5 00/11] drivers: net: xgene: Fix module crash and 1G hot-plug Iyappan Subramanian
2016-07-07 23:02 ` [PATCH v5 01/11] drivers: net: xgene: Separate set_speed from mac_init Iyappan Subramanian
2016-07-07 23:02 ` [PATCH v5 03/11] drivers: net: xgene: Fix module unload crash - change sw sequence Iyappan Subramanian
2016-07-07 23:02 ` [PATCH v5 04/11] drivers: net: xgene: Fix module unload crash - clkrst sequence Iyappan Subramanian
2016-07-07 23:02 ` [PATCH v5 05/11] drivers: net: phy: xgene: Add MDIO driver Iyappan Subramanian
2016-07-08  5:13   ` Florian Fainelli
2016-07-07 23:02 ` [PATCH v5 06/11] drivers: net: xgene: Add backward compatibility Iyappan Subramanian
2016-07-07 23:02 ` [PATCH v5 07/11] drivers: net: xgene: Enable MDIO driver Iyappan Subramanian
     [not found] ` <1467932579-14320-1-git-send-email-isubramanian-qTEPVZfXA3Y@public.gmane.org>
2016-07-07 23:02   ` [PATCH v5 02/11] drivers: net: xgene: Fix module unload crash - hw resource cleanup Iyappan Subramanian
2016-07-07 23:02   ` [PATCH v5 08/11] drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset Iyappan Subramanian
2016-07-07 23:02 ` Iyappan Subramanian [this message]
     [not found]   ` <1467932579-14320-10-git-send-email-isubramanian-qTEPVZfXA3Y@public.gmane.org>
2016-08-01 21:13     ` [PATCH v5 09/11] dtb: xgene: Add MDIO node Olof Johansson
2016-08-02 19:10       ` Duc Dang
2016-07-07 23:02 ` [PATCH v5 10/11] Documentation: " Iyappan Subramanian
2016-07-13 13:10   ` Rob Herring
2016-07-21 17:57     ` Iyappan Subramanian
2016-07-07 23:02 ` [PATCH v5 11/11] MAINTAINERS: xgene: Add driver and documentation path Iyappan Subramanian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467932579-14320-10-git-send-email-isubramanian@apm.com \
    --to=isubramanian@apm.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=patches@apm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).