* [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings
2016-04-20 9:32 ` [PATCH v2 1/4] dt-bindings: Add jdi panel vendor Vinay Simha BN
@ 2016-04-20 9:32 ` Vinay Simha BN
[not found] ` <1461144755-10633-2-git-send-email-simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Vinay Simha BN @ 2016-04-20 9:32 UTC (permalink / raw)
Cc: Vinay Simha BN, Thierry Reding, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala,
open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Add documentation for lt070me05000 panel
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
---
.../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..ffe0550
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,43 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- power-supply: phandle of the regulator that provides the supply voltage
+ IOVCC , power supply for LCM (1.8V)
+- vddp-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply (3-5V)
+- dcdc_en-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply enable, High active
+- reset-gpio: phandle of gpio for reset line
+ This should be 8mA, gpio can be configured using mux and pinctrl.
+ XRES, Reset, Low active
+- enable-gpio: phandle of gpio for enable line
+ LED_EN, LED backlight enable, High active
+- vcc-gpio: phandle of regulator/gpio that provides the supply voltage
+ VDD, LED power supply (3-5V)
+
+Optional properties:
+- pwm-gpio: phandle of gpio/pwm
+ pwm backlight control, this should be mapped to the backlight level
+ display brightness (0x51)
+
+Example:
+
+ dsi0: qcom,mdss_dsi@4700000 {
+ panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dsi_panel_pinctrl>;
+
+ power-supply = <&pm8921_lvs5>;
+ vddp-supply = <&pm8921_l17>;
+ dcdc_en-supply = <&pm8921_lvs7>;
+
+ reset-gpio = <&tlmm_pinmux 54 0>;
+ enable-gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+ vcc-gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+ pwm-gpio = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.1.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings
[not found] ` <1461144755-10633-2-git-send-email-simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2016-04-21 15:45 ` Rob Herring
2016-04-22 6:55 ` Vinay Simha
0 siblings, 1 reply; 6+ messages in thread
From: Rob Herring @ 2016-04-21 15:45 UTC (permalink / raw)
To: Vinay Simha BN
Cc: Thierry Reding, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Wed, Apr 20, 2016 at 03:02:31PM +0530, Vinay Simha BN wrote:
> Add documentation for lt070me05000 panel
>
> Signed-off-by: Vinay Simha BN <simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> .../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> new file mode 100644
> index 0000000..ffe0550
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> @@ -0,0 +1,43 @@
> +JDI model LT070ME05000 1200x1920 7" DSI Panel
> +
> +Required properties:
> +- compatible: should be "jdi,lt070me05000"
> +- power-supply: phandle of the regulator that provides the supply voltage
> + IOVCC , power supply for LCM (1.8V)
> +- vddp-supply: phandle of the regulator that provides the supply voltage
> + Power IC supply (3-5V)
> +- dcdc_en-supply: phandle of the regulator that provides the supply voltage
> + Power IC supply enable, High active
> +- reset-gpio: phandle of gpio for reset line
> + This should be 8mA, gpio can be configured using mux and pinctrl.
> + XRES, Reset, Low active
> +- enable-gpio: phandle of gpio for enable line
> + LED_EN, LED backlight enable, High active
These should all be -gpios instead.
> +- vcc-gpio: phandle of regulator/gpio that provides the supply voltage
> + VDD, LED power supply (3-5V)
Is it a regulator or gpio?
> +
> +Optional properties:
> +- pwm-gpio: phandle of gpio/pwm
This should use the PWM binding. It may not be a GPIO on some hosts.
> + pwm backlight control, this should be mapped to the backlight level
> + display brightness (0x51)
> +
> +Example:
> +
> + dsi0: qcom,mdss_dsi@4700000 {
> + panel@0 {
> + compatible = "jdi,lt070me05000";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&dsi_panel_pinctrl>;
> +
> + power-supply = <&pm8921_lvs5>;
> + vddp-supply = <&pm8921_l17>;
> + dcdc_en-supply = <&pm8921_lvs7>;
> +
> + reset-gpio = <&tlmm_pinmux 54 0>;
> + enable-gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> + vcc-gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> +
> + pwm-gpio = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
> + };
> + };
> --
> 2.1.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings
2016-04-21 15:45 ` Rob Herring
@ 2016-04-22 6:55 ` Vinay Simha
[not found] ` <CAGWqDJ697YTCK8hGFzODCM0q-3ReOgb3qWTYnsuYWzPLqFqxBw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Vinay Simha @ 2016-04-22 6:55 UTC (permalink / raw)
To: Rob Herring
Cc: Thierry Reding, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, Sumit.semwal, John Stultz, Archit Taneja
On Thu, Apr 21, 2016 at 9:15 PM, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Wed, Apr 20, 2016 at 03:02:31PM +0530, Vinay Simha BN wrote:
>> Add documentation for lt070me05000 panel
>>
>> Signed-off-by: Vinay Simha BN <simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
>> .../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
>> new file mode 100644
>> index 0000000..ffe0550
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
>> @@ -0,0 +1,43 @@
>> +JDI model LT070ME05000 1200x1920 7" DSI Panel
>> +
>> +Required properties:
>> +- compatible: should be "jdi,lt070me05000"
>> +- power-supply: phandle of the regulator that provides the supply voltage
>> + IOVCC , power supply for LCM (1.8V)
>> +- vddp-supply: phandle of the regulator that provides the supply voltage
>> + Power IC supply (3-5V)
>> +- dcdc_en-supply: phandle of the regulator that provides the supply voltage
>> + Power IC supply enable, High active
>> +- reset-gpio: phandle of gpio for reset line
>> + This should be 8mA, gpio can be configured using mux and pinctrl.
>> + XRES, Reset, Low active
>> +- enable-gpio: phandle of gpio for enable line
>> + LED_EN, LED backlight enable, High active
>
> These should all be -gpios instead.
will implement in v3
>
>> +- vcc-gpio: phandle of regulator/gpio that provides the supply voltage
>> + VDD, LED power supply (3-5V)
>
> Is it a regulator or gpio?
>
VDD is LED power supply, but in nexus 7 2nd gen they are using gpio 23
instead of regulator.
if we use vcc-supply, not sure we can give the gpio device tree entry
to it in nexus 7 dts. Any inputs ?
>> +
>> +Optional properties:
>> +- pwm-gpio: phandle of gpio/pwm
>
> This should use the PWM binding. It may not be a GPIO on some hosts.
pwm-gpio will go to the backlight (pwm). right now it is not used
since pwm pm8921 upstream driver is not yet implemented. Shall i
remove this pwm-gpio now and the backlight property when pwm pm8921 is
implemented?
>
>> + pwm backlight control, this should be mapped to the backlight level
>> + display brightness (0x51)
>> +
>> +Example:
>> +
>> + dsi0: qcom,mdss_dsi@4700000 {
>> + panel@0 {
>> + compatible = "jdi,lt070me05000";
>> + reg = <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&dsi_panel_pinctrl>;
>> +
>> + power-supply = <&pm8921_lvs5>;
>> + vddp-supply = <&pm8921_l17>;
>> + dcdc_en-supply = <&pm8921_lvs7>;
>> +
>> + reset-gpio = <&tlmm_pinmux 54 0>;
>> + enable-gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
>> + vcc-gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
>> +
>> + pwm-gpio = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
>> + };
>> + };
>> --
>> 2.1.2
>>
--
Regards,
Vinay Simha.B.N.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings
[not found] ` <CAGWqDJ697YTCK8hGFzODCM0q-3ReOgb3qWTYnsuYWzPLqFqxBw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2016-04-22 11:59 ` Thierry Reding
0 siblings, 0 replies; 6+ messages in thread
From: Thierry Reding @ 2016-04-22 11:59 UTC (permalink / raw)
To: Vinay Simha
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, Sumit.semwal, John Stultz, Archit Taneja
[-- Attachment #1: Type: text/plain, Size: 2930 bytes --]
On Fri, Apr 22, 2016 at 12:25:52PM +0530, Vinay Simha wrote:
> On Thu, Apr 21, 2016 at 9:15 PM, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> > On Wed, Apr 20, 2016 at 03:02:31PM +0530, Vinay Simha BN wrote:
> >> Add documentation for lt070me05000 panel
> >>
> >> Signed-off-by: Vinay Simha BN <simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >> ---
> >> .../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++
> >> 1 file changed, 43 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> >> new file mode 100644
> >> index 0000000..ffe0550
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> >> @@ -0,0 +1,43 @@
> >> +JDI model LT070ME05000 1200x1920 7" DSI Panel
> >> +
> >> +Required properties:
> >> +- compatible: should be "jdi,lt070me05000"
> >> +- power-supply: phandle of the regulator that provides the supply voltage
> >> + IOVCC , power supply for LCM (1.8V)
> >> +- vddp-supply: phandle of the regulator that provides the supply voltage
> >> + Power IC supply (3-5V)
> >> +- dcdc_en-supply: phandle of the regulator that provides the supply voltage
> >> + Power IC supply enable, High active
> >> +- reset-gpio: phandle of gpio for reset line
> >> + This should be 8mA, gpio can be configured using mux and pinctrl.
> >> + XRES, Reset, Low active
> >> +- enable-gpio: phandle of gpio for enable line
> >> + LED_EN, LED backlight enable, High active
> >
> > These should all be -gpios instead.
> will implement in v3
> >
> >> +- vcc-gpio: phandle of regulator/gpio that provides the supply voltage
> >> + VDD, LED power supply (3-5V)
> >
> > Is it a regulator or gpio?
> >
> VDD is LED power supply, but in nexus 7 2nd gen they are using gpio 23
> instead of regulator.
> if we use vcc-supply, not sure we can give the gpio device tree entry
> to it in nexus 7 dts. Any inputs ?
You can model it as a fixed regulator that's enabled by a GPIO. See:
Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> >> +
> >> +Optional properties:
> >> +- pwm-gpio: phandle of gpio/pwm
> >
> > This should use the PWM binding. It may not be a GPIO on some hosts.
>
> pwm-gpio will go to the backlight (pwm). right now it is not used
> since pwm pm8921 upstream driver is not yet implemented. Shall i
> remove this pwm-gpio now and the backlight property when pwm pm8921 is
> implemented?
This suggests to me that you don't have a good idea yet what the final
binding would need to look like, so it might be better to get all the
dependencies in place first so that the binding can be validated to work
properly.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/4] dt-bindings: Add Japan Display Inc vendor id
@ 2016-07-13 16:44 Vinay Simha BN
2016-07-13 16:44 ` [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Vinay Simha BN
0 siblings, 1 reply; 6+ messages in thread
From: Vinay Simha BN @ 2016-07-13 16:44 UTC (permalink / raw)
Cc: Vinay Simha BN, Archit Taneja, John Stultz, Thierry Reding,
Sumit Semwal, Rob Herring, Mark Rutland, Thierry Reding,
Jonathan Cameron, Shawn Guo, Jarkko Sakkinen,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Add vendor id for Japan Display Inc.
Cc: Archit Taneja <archit.taneja-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: John Stultz <john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Sumit Semwal <sumit.semwal-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Vinay Simha BN <simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ecc8cf4..1b134f3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -138,6 +138,7 @@ invensense InvenSense Inc.
isee ISEE 2007 S.L.
isil Intersil
issi Integrated Silicon Solutions Inc.
+jdi Japan Display Inc.
jedec JEDEC Solid State Technology Association
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings
2016-07-13 16:44 [PATCH 1/4] dt-bindings: Add Japan Display Inc vendor id Vinay Simha BN
@ 2016-07-13 16:44 ` Vinay Simha BN
0 siblings, 0 replies; 6+ messages in thread
From: Vinay Simha BN @ 2016-07-13 16:44 UTC (permalink / raw)
Cc: Vinay Simha BN, Archit Taneja, John Stultz, Thierry Reding,
Sumit Semwal, David Airlie, Rob Herring, Mark Rutland,
open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Add documentation for lt070me05000 panel
Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v2:
* incorporated rob herring and thierry reviews
gpio to gpios, gpio to regulator using fixed regulators
and pwm backlight is removed, since it is controlled by
dcs commands
---
.../bindings/display/panel/jdi,lt070me05000.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..613b76f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,57 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply (3-5V)
+- dcdc_en-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply enable, High active
+- vcc-supply: phandle of the regulator that provides the supply voltage
+ IOVCC , power supply for LCM (1.8V)
+- reset-gpios: phandle of gpio for reset line
+ This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+ XRES, Reset, Low active
+- enable-gpios: phandle of gpio for enable line
+ LED_EN, LED backlight enable, High active
+
+Example:
+
+ vcc_1p8v: regulator-fixed@2 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1p8v";
+ regulator-type = "voltage";
+ startup-delay-us = <0>;
+ gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ tlmm_pinmux: pinctrl@800000 {
+
+ dsi_panel_pinctrl: dsi-panel-pinctrl {
+ mux {
+ pins = "gpio54";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+ };
+ };
+
+ dsi0: qcom,mdss_dsi@4700000 {
+ panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dsi_panel_pinctrl>;
+
+ vddp-supply = <&pm8921_l17>;
+ dcdc_en-supply = <&pm8921_lvs7>;
+ vcc-supply = <&vcc_1p8v>;
+
+ reset-gpios = <&tlmm_pinmux 54 0>;
+ enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-07-13 16:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-07-13 16:44 [PATCH 1/4] dt-bindings: Add Japan Display Inc vendor id Vinay Simha BN
2016-07-13 16:44 ` [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Vinay Simha BN
-- strict thread matches above, loose matches on Subject: below --
2016-04-14 17:15 [RESEND][PATCH] drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel Rob Herring
2016-04-20 9:32 ` [PATCH v2 1/4] dt-bindings: Add jdi panel vendor Vinay Simha BN
2016-04-20 9:32 ` [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings Vinay Simha BN
[not found] ` <1461144755-10633-2-git-send-email-simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-04-21 15:45 ` Rob Herring
2016-04-22 6:55 ` Vinay Simha
[not found] ` <CAGWqDJ697YTCK8hGFzODCM0q-3ReOgb3qWTYnsuYWzPLqFqxBw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-04-22 11:59 ` Thierry Reding
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).