From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: [PATCH 01/10] Documentation: dt: socfpga: Add Arria10 NAND EDAC binding Date: Thu, 14 Jul 2016 11:06:39 -0500 Message-ID: <1468512408-5156-2-git-send-email-tthayer@opensource.altera.com> References: <1468512408-5156-1-git-send-email-tthayer@opensource.altera.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1468512408-5156-1-git-send-email-tthayer@opensource.altera.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: bp@alien8.de, dougthompson@xmission.com, m.chehab@samsung.com, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux@arm.linux.org.uk, dinguyen@opensource.altera.com, grant.likely@linaro.org Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, tthayer.linux@gmail.com, tthayer@opensource.altera.com, linux-arm-kernel@lists.infradead.org, linux-edac@vger.kernel.org List-Id: devicetree@vger.kernel.org From: Thor Thayer Add the device tree bindings needed to support the Altera NAND FIFO buffers EDAC on the Arria10 chip. Signed-off-by: Thor Thayer --- .../bindings/arm/altera/socfpga-eccmgr.txt | 32 ++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt index b545856..1bcbab2 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt @@ -90,6 +90,14 @@ Required Properties: - interrupts : Should be single bit error interrupt, then double bit error interrupt, in this order. +NAND FIFO ECC +Required Properties: +- compatible : Should be "altr,socfpga-nand-ecc" +- reg : Address and size for ECC block registers. +- altr,ecc-parent : phandle to parent NAND node. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + Example: eccmgr: eccmgr@ffd06000 { @@ -132,4 +140,28 @@ Example: interrupts = <5 IRQ_TYPE_LEVEL_HIGH>, <37 IRQ_TYPE_LEVEL_HIGH>; }; + + nand-buf-ecc@ff8c2000 { + compatible = "altr,socfpga-nand-ecc"; + reg = <0xff8c2000 0x400>; + altr,ecc-parent = <&nand>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>; + }; + + nand-rd-ecc@ff8c2400 { + compatible = "altr,socfpga-nand-ecc"; + reg = <0xff8c2400 0x400>; + altr,ecc-parent = <&nand>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>; + }; + + nand-wr-ecc@ff8c2800 { + compatible = "altr,socfpga-nand-ecc"; + reg = <0xff8c2800 0x400>; + altr,ecc-parent = <&nand>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>; + }; }; -- 1.7.9.5