From: Tai Nguyen <ttnguyen@apm.com>
To: mark.rutland@arm.com, will.deacon@arm.com,
catalin.marinas@arm.com, joe@perches.com,
paul.gortmaker@windriver.com
Cc: dhdang@apm.com, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
patches@apm.com, Tai Nguyen <ttnguyen@apm.com>
Subject: [PATCH v9 4/4] arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries
Date: Thu, 14 Jul 2016 10:27:46 -0700 [thread overview]
Message-ID: <1468517266-1642-5-git-send-email-ttnguyen@apm.com> (raw)
In-Reply-To: <1468517266-1642-1-git-send-email-ttnguyen@apm.com>
This patch adds APM X-Gene SoC PMU DTS entries.
Signed-off-by: Tai Nguyen <ttnguyen@apm.com>
---
arch/arm64/boot/dts/apm/apm-storm.dtsi | 58 ++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 5147d76..1d57820 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -572,6 +572,64 @@
};
};
+ pmu: pmu@78810000 {
+ compatible = "apm,xgene-pmu-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ reg = <0x0 0x78810000 0x0 0x1000>;
+ interrupts = <0x0 0x22 0x4>;
+
+ pmul3c@7e610000 {
+ compatible = "apm,xgene-pmu-l3c";
+ reg = <0x0 0x7e610000 0x0 0x1000>;
+ };
+
+ pmuiob@7e940000 {
+ compatible = "apm,xgene-pmu-iob";
+ reg = <0x0 0x7e940000 0x0 0x1000>;
+ };
+
+ pmucmcb@7e710000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e710000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmcb@7e730000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e730000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e810000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e810000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmc@7e850000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e850000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e890000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e890000 0x0 0x1000>;
+ enable-bit-index = <2>;
+ };
+
+ pmucmc@7e8d0000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e8d0000 0x0 0x1000>;
+ enable-bit-index = <3>;
+ };
+ };
+
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
--
1.9.1
prev parent reply other threads:[~2016-07-14 17:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-14 17:27 [PATCH v9 0/4] perf: Add APM X-Gene SoC Performance Monitoring Unit driver Tai Nguyen
2016-07-14 17:27 ` [PATCH v9 1/4] MAINTAINERS: Add entry for APM X-Gene SoC PMU driver Tai Nguyen
2016-07-14 17:27 ` [PATCH v9 2/4] Documentation: Add documentation for APM X-Gene SoC PMU DTS binding Tai Nguyen
2016-07-14 17:27 ` [PATCH v9 3/4] perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Tai Nguyen
2016-07-14 17:47 ` Joe Perches
2016-07-14 17:54 ` Tai Tri Nguyen
[not found] ` <CACgAJHwzWG_6iWG4OcL3v5QcUF892DwBcJxayqbH4f2kd7=kQQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-07-14 18:05 ` Tai Tri Nguyen
2016-07-15 9:45 ` Mark Rutland
2016-07-15 17:31 ` Tai Tri Nguyen
2016-07-14 17:27 ` Tai Nguyen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468517266-1642-5-git-send-email-ttnguyen@apm.com \
--to=ttnguyen@apm.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dhdang@apm.com \
--cc=joe@perches.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=patches@apm.com \
--cc=paul.gortmaker@windriver.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).