From: Sinan Kaya <okaya@codeaurora.org>
To: dmaengine@vger.kernel.org, timur@codeaurora.org,
devicetree@vger.kernel.org, cov@codeaurora.org,
vinod.koul@intel.com, jcm@redhat.com
Cc: eric.auger@linaro.org, agross@codeaurora.org, arnd@arndb.de,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Dan Williams <dan.j.williams@intel.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 08/10] dmaengine: qcom_hidma: bring out interrupt cause
Date: Mon, 18 Jul 2016 14:39:35 -0400 [thread overview]
Message-ID: <1468867177-15007-9-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1468867177-15007-1-git-send-email-okaya@codeaurora.org>
Bring out the interrupt cause to the top level so that MSI interrupts
can be hooked at a later stage.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/hidma_ll.c | 60 ++++++++++++++++++++-------------------------
1 file changed, 27 insertions(+), 33 deletions(-)
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 2753210..eb78952 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -403,12 +403,18 @@ static void hidma_ll_abort(unsigned long arg)
* requests traditionally to the destination, this concept does not apply
* here for this HW.
*/
-irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
{
- struct hidma_lldev *lldev = arg;
- u32 status;
- u32 enable;
- u32 cause;
+ if (cause & HIDMA_ERR_INT_MASK) {
+ dev_err(lldev->dev, "error 0x%x, resetting...\n",
+ cause);
+
+ /* Clear out pending interrupts */
+ writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+
+ tasklet_schedule(&lldev->rst_task);
+ return;
+ }
/*
* Fine tuned for this HW...
@@ -418,40 +424,28 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
* interrupt delivery guarantees. Do not copy this code blindly and
* expect that to work.
*/
- status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
- enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
- cause = status & enable;
-
- while (cause) {
- if (cause & HIDMA_ERR_INT_MASK) {
- dev_err(lldev->dev, "error 0x%x, resetting...\n",
- cause);
-
- /* Clear out pending interrupts */
- writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
-
- tasklet_schedule(&lldev->rst_task);
- goto out;
- }
-
+ while (atomic_read(&lldev->pending_tre_count)) {
/*
* Try to consume as many EVREs as possible.
*/
- hidma_handle_tre_completion(lldev);
+ hidma_handle_tre_completion(lldev, 0, 0);
+ }
- /* We consumed TREs or there are pending TREs or EVREs. */
- writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+ /* We consumed TREs or there are pending TREs or EVREs. */
+ writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+}
- /*
- * Another interrupt might have arrived while we are
- * processing this one. Read the new cause.
- */
- status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
- enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
- cause = status & enable;
- }
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+ struct hidma_lldev *lldev = arg;
+ u32 status;
+ u32 enable;
+ u32 cause;
-out:
+ status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
+ enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+ cause = status & enable;
+ hidma_ll_int_handler_internal(lldev, cause);
return IRQ_HANDLED;
}
--
1.8.2.1
next prev parent reply other threads:[~2016-07-18 18:39 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-18 18:39 [PATCH 00/10] dmaengine: qcom_hidma: add MSI interrupt support Sinan Kaya
[not found] ` <1468867177-15007-1-git-send-email-okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-07-18 18:39 ` [PATCH 01/10] Documentation: DT: qcom_hidma: update binding for MSI Sinan Kaya
2016-07-19 10:37 ` Mark Rutland
2016-07-19 12:42 ` Sinan Kaya
2016-07-18 18:39 ` [PATCH 10/10] dmaengine: qcom_hidma: add MSI support for interrupts Sinan Kaya
2016-07-24 6:42 ` Vinod Koul
2016-07-24 14:38 ` Sinan Kaya
2016-08-04 12:46 ` Vinod Koul
2016-08-04 13:59 ` Sinan Kaya
[not found] ` <497ddb6c-0233-657f-72c6-b844b798ff11-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-08 8:14 ` Vinod Koul
2016-08-08 11:48 ` okaya
2016-07-18 18:39 ` [PATCH 02/10] Documentation: DT: qcom_hidma: correct spelling mistakes Sinan Kaya
2016-07-20 1:16 ` Rob Herring
2016-07-18 18:39 ` [PATCH 03/10] of: irq: make of_msi_configure accessible from modules Sinan Kaya
[not found] ` <1468867177-15007-4-git-send-email-okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-07-18 21:24 ` Rob Herring
2016-07-19 21:40 ` Sinan Kaya
2016-07-18 18:39 ` [PATCH 04/10] dmaending: qcom_hidma: configure DMA and MSI for OF Sinan Kaya
2016-07-24 6:33 ` Vinod Koul
2016-07-24 14:40 ` Sinan Kaya
2016-07-18 18:39 ` [PATCH 05/10] dmaengine: qcom_hidma: make pending_tre_count atomic Sinan Kaya
2016-07-18 18:39 ` [PATCH 06/10] dmaengine: qcom_hidma: make error and success path common Sinan Kaya
2016-07-18 18:39 ` [PATCH 07/10] dmaengine: qcom_hidma: eliminate processed variables Sinan Kaya
2016-07-18 18:39 ` Sinan Kaya [this message]
2016-07-18 18:39 ` [PATCH 09/10] dmaengine: qcom_hidma: add a common API to setup the interrupt Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468867177-15007-9-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=arnd@arndb.de \
--cc=cov@codeaurora.org \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=eric.auger@linaro.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=timur@codeaurora.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).