[PATCH v5 0/3] AUXADC: Mediatek auxadc driver

[PATCH v5 0/3] AUXADC: Mediatek auxadc driver

[Zhiyong Tao]

This series includes three patches:
1.Change the device tree binding documentation.
2.Add auxadc driver based on linux iio.
3.Add auxadc nodes in the mediatek MT2701 dtsi file.

Changes in patch v5:
1).Add 'Acked-by' information in commit message.
1).Change auxadc compatible in binding document.
2).Remove power on failed check.
3).Moved power off error unwind block to 'err_power_off'.

Changes in patch v4:
1).Change the file name 'mt65xx_auxdc.txt' to 'mt6577_auxdc.txt'.
2).Remove 'break' after 'return' in 'mt6577_auxadc_read_raw'.
3).Use 'mt2701' instead of 'auxadc' in dts commit message.
4).Change 'auxadc@' to 'adc@' in mt2701.dtsi.

Changes in patch v3:
1).Add '#' before 'io-channel-cells' and change 'auxadc@' to 'adc@' in auxadc binding document.
2).Fix CONFIG_MEDIATEK_MT65XX_AUXADC sequence as alphabetical order.
3).Change the prefix 'MT65XX' to 'MT6577' to match auxadc driver name.
4).Remove the delays stored in 'mt6577_auxadc_device' and use the defined delay directly.
5).Use '-ETIMEDOUT' instead of '-EINVAL'.
6).Return value directly in 'mt6577_auxadc_read_raw'.
7).Add power off and unprepare clock if 'iio_device_register' failed.
8).Change 'Registers' to 'Register'.

Changes in patch v2:
1).Change the file name mt65xx_auxadc.c to mt6577_auxadc.c.
2).Add 'depends on ARCH_MEDIATEK || COMPILE_TEST and HAS_IOMEM' for MEDIATEK_MT65XX_AUXADC config.
3).Add check case for return value of 'readl_poll_timeout'.
4).Remove returning 1 and 0 for SCALE and OFFSET. use channel type 'IIO_CHAN_INFO_PROCESSED' instead of 'IIO_CHAN_INFO_RAW'.
5).Remove 'IIO_CHAN_INFO_OFFSET' and 'IIO_CHAN_INFO_SCALE' in 'MT65XX_AUXADC_CHANNEL' channel type.
6).Add check case when auxadc power on failure. if auxadc power on failure, clk_disable_unprepare should be executed.
7).Put 'platform_set_drvdata' before 'iio_device_register'.
8).Fix coding style and spelling error.

Zhiyong Tao (3):
  dt-bindings: auxadc: Add binding document for Mediatek auxadc.
  iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
  arm: dts: mt2701: Add auxadc node.

 .../auxadc.txt => iio/adc/mt6577_auxadc.txt}       |   18 +-
 arch/arm/boot/dts/mt2701.dtsi                      |    9 +
 drivers/iio/adc/Kconfig                            |   13 +
 drivers/iio/adc/Makefile                           |    1 +
 drivers/iio/adc/mt6577_auxadc.c                    |  289 ++++++++++++++++++++
 5 files changed, 325 insertions(+), 5 deletions(-)
 rename Documentation/devicetree/bindings/{soc/mediatek/auxadc.txt => iio/adc/mt6577_auxadc.txt} (46%)
 create mode 100644 drivers/iio/adc/mt6577_auxadc.c

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 1/3] dt-bindings: auxadc: Add binding document for Mediatek auxadc.

[Zhiyong Tao]

The commit adds the device tree binding documentation for the mediatek
auxadc found on Mediatek MT2701.
Thermal gets auxadc sample data by iio device.
So the commit changes auxadc device tree binding documentation from
/soc/mediatek/auxadc.txt to /iio/adc/mt6577_auxadc.txt.

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Zhiyong Tao <zhiyong.tao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 .../auxadc.txt => iio/adc/mt6577_auxadc.txt}       |   18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)
 rename Documentation/devicetree/bindings/{soc/mediatek/auxadc.txt => iio/adc/mt6577_auxadc.txt} (46%)

diff --git a/Documentation/devicetree/bindings/soc/mediatek/auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
similarity index 46%
rename from Documentation/devicetree/bindings/soc/mediatek/auxadc.txt
rename to Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
index bdb7829..68c45cb 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/auxadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
@@ -1,4 +1,4 @@
-MediaTek AUXADC
+* Mediatek AUXADC - Analog to Digital Converter on Mediatek mobile soc (mt65xx/mt81xx/mt27xx)
 ===============
 
 The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
@@ -10,12 +10,20 @@ Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
 for the Thermal Controller which holds a phandle to the AUXADC.
 
 Required properties:
-- compatible: Must be "mediatek,mt8173-auxadc"
-- reg: Address range of the AUXADC unit
+  - compatible: Should be one of:
+    - "mediatek,mt2701-auxadc": For MT2701 family of SoCs
+    - "mediatek,mt8173-auxadc": For MT8173 family of SoCs
+  - reg: Address range of the AUXADC unit.
+  - clocks: Should contain a clock specifier for each entry in clock-names
+  - clock-names: Should contain "main".
+  - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
 Example:
 
-auxadc: auxadc@11001000 {
-	compatible = "mediatek,mt8173-auxadc";
+auxadc: adc@11001000 {
+	compatible = "mediatek,mt2701-auxadc";
 	reg = <0 0x11001000 0 0x1000>;
+	clocks = <&pericfg CLK_PERI_AUXADC>;
+	clock-names = "main";
+	#io-channel-cells = <1>;
 };
-- 
1.7.9.5

[PATCH v5 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.

[Zhiyong Tao]

Add Mediatek auxadc driver based on iio.
It will register a device in iio and support iio.
So thermal can read auxadc channel to sample data by iio device.
It is tested successfully on mt2701 platform.
Mt8173 and mt6577 platforms are not tested.
But the expectation is compatible.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
---
 drivers/iio/adc/Kconfig         |   13 ++
 drivers/iio/adc/Makefile        |    1 +
 drivers/iio/adc/mt6577_auxadc.c |  289 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 303 insertions(+)
 create mode 100644 drivers/iio/adc/mt6577_auxadc.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 25378c5..14929fc 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -305,6 +305,19 @@ config MCP3422
 	  This driver can also be built as a module. If so, the module will be
 	  called mcp3422.
 
+config MEDIATEK_MT6577_AUXADC
+        tristate "MediaTek AUXADC driver"
+        depends on ARCH_MEDIATEK || COMPILE_TEST
+        depends on HAS_IOMEM
+        help
+          Say yes here to enable support for MediaTek mt65xx AUXADC.
+
+          The driver supports immediate mode operation to read from one of sixteen
+          channels (external or internal).
+
+          This driver can also be built as a module. If so, the module will be
+          called mt6577_auxadc.
+
 config MEN_Z188_ADC
 	tristate "MEN 16z188 ADC IP Core support"
 	depends on MCB
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 38638d4..8306347 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
+obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c
new file mode 100644
index 0000000..6240236
--- /dev/null
+++ b/drivers/iio/adc/mt6577_auxadc.c
@@ -0,0 +1,289 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Zhiyong Tao <zhiyong.tao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/iopoll.h>
+#include <linux/io.h>
+#include <linux/iio/iio.h>
+
+/* Register definitions */
+#define MT6577_AUXADC_CON0                    0x00
+#define MT6577_AUXADC_CON1                    0x04
+#define MT6577_AUXADC_CON2                    0x10
+#define MT6577_AUXADC_STA                     BIT(0)
+
+#define MT6577_AUXADC_DAT0                    0x14
+#define MT6577_AUXADC_RDY0                    BIT(12)
+
+#define MT6577_AUXADC_MISC                    0x94
+#define MT6577_AUXADC_PDN_EN                  BIT(14)
+
+#define MT6577_AUXADC_DAT_MASK                0xfff
+#define MT6577_AUXADC_SLEEP_US                1000
+#define MT6577_AUXADC_TIMEOUT_US              10000
+#define MT6577_AUXADC_POWER_READY_MS          1
+#define MT6577_AUXADC_SAMPLE_READY_US         25
+
+struct mt6577_auxadc_device {
+	void __iomem *reg_base;
+	struct clk *adc_clk;
+	struct mutex lock;
+};
+
+#define MT6577_AUXADC_CHANNEL(idx) {				    \
+		.type = IIO_VOLTAGE,				    \
+		.indexed = 1,					    \
+		.channel = (idx),				    \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+}
+
+static const struct iio_chan_spec mt6577_auxadc_iio_channels[] = {
+	MT6577_AUXADC_CHANNEL(0),
+	MT6577_AUXADC_CHANNEL(1),
+	MT6577_AUXADC_CHANNEL(2),
+	MT6577_AUXADC_CHANNEL(3),
+	MT6577_AUXADC_CHANNEL(4),
+	MT6577_AUXADC_CHANNEL(5),
+	MT6577_AUXADC_CHANNEL(6),
+	MT6577_AUXADC_CHANNEL(7),
+	MT6577_AUXADC_CHANNEL(8),
+	MT6577_AUXADC_CHANNEL(9),
+	MT6577_AUXADC_CHANNEL(10),
+	MT6577_AUXADC_CHANNEL(11),
+	MT6577_AUXADC_CHANNEL(12),
+	MT6577_AUXADC_CHANNEL(13),
+	MT6577_AUXADC_CHANNEL(14),
+	MT6577_AUXADC_CHANNEL(15),
+};
+
+static int mt6577_auxadc_read(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan)
+{
+	u32 rawdata, val;
+	void __iomem *reg_channel;
+	int ret;
+	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
+
+	reg_channel = adc_dev->reg_base + MT6577_AUXADC_DAT0 +
+		      chan->channel * 0x04;
+
+	mutex_lock(&adc_dev->lock);
+
+	val = readl(adc_dev->reg_base + MT6577_AUXADC_CON1);
+	val &= ~(1 << chan->channel);
+	writel(val, adc_dev->reg_base + MT6577_AUXADC_CON1);
+
+	/* read channel and make sure old ready bit == 0 */
+	ret = readl_poll_timeout(reg_channel, val,
+				 ((val & MT6577_AUXADC_RDY0) == 0),
+				 MT6577_AUXADC_SLEEP_US,
+				 MT6577_AUXADC_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(indio_dev->dev.parent,
+			"wait for channel[%d] ready bit clear time out\n",
+			chan->channel);
+
+		mutex_unlock(&adc_dev->lock);
+
+		return -ETIMEDOUT;
+	}
+
+	/* set bit to trigger sample */
+	val = readl(adc_dev->reg_base + MT6577_AUXADC_CON1);
+	val |= 1 << chan->channel;
+	writel(val, adc_dev->reg_base + MT6577_AUXADC_CON1);
+
+	/* we must delay here for hardware sample channel data */
+	udelay(MT6577_AUXADC_SAMPLE_READY_US);
+
+	/* check MTK_AUXADC_CON2 if auxadc is idle */
+	ret = readl_poll_timeout(adc_dev->reg_base + MT6577_AUXADC_CON2, val,
+				 ((val & MT6577_AUXADC_STA) == 0),
+				 MT6577_AUXADC_SLEEP_US,
+				 MT6577_AUXADC_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(indio_dev->dev.parent,
+			"wait for auxadc idle time out\n");
+
+		mutex_unlock(&adc_dev->lock);
+
+		return -ETIMEDOUT;
+	}
+
+	/* read channel and make sure ready bit == 1 */
+	ret = readl_poll_timeout(reg_channel, val,
+				 ((val & MT6577_AUXADC_RDY0) != 0),
+				 MT6577_AUXADC_SLEEP_US,
+				 MT6577_AUXADC_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(indio_dev->dev.parent,
+			"wait for channel[%d] data ready time out\n",
+			chan->channel);
+
+		mutex_unlock(&adc_dev->lock);
+
+		return -ETIMEDOUT;
+	}
+
+	/* read data */
+	rawdata = readl(reg_channel) & MT6577_AUXADC_DAT_MASK;
+
+	mutex_unlock(&adc_dev->lock);
+
+	return rawdata;
+}
+
+static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int *val,
+				  int *val2,
+				  long info)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_PROCESSED:
+		*val = mt6577_auxadc_read(indio_dev, chan);
+		if (*val < 0) {
+			dev_err(indio_dev->dev.parent,
+				"failed to sample data on channel[%d]\n",
+				chan->channel);
+			return *val;
+		}
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info mt6577_auxadc_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &mt6577_auxadc_read_raw,
+};
+
+static int mt6577_auxadc_probe(struct platform_device *pdev)
+{
+	struct mt6577_auxadc_device *adc_dev;
+	unsigned long adc_clk_rate;
+	struct resource *res;
+	struct iio_dev *indio_dev;
+	int ret;
+	u32 val;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc_dev = iio_priv(indio_dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->info = &mt6577_auxadc_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mt6577_auxadc_iio_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mt6577_auxadc_iio_channels);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	adc_dev->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(adc_dev->reg_base)) {
+		dev_err(&pdev->dev, "failed to get auxadc base address.\n");
+		return PTR_ERR(adc_dev->reg_base);
+	}
+
+	adc_dev->adc_clk = devm_clk_get(&pdev->dev, "main");
+	if (IS_ERR(adc_dev->adc_clk)) {
+		dev_err(&pdev->dev, "failed to get auxadc clock\n");
+		return PTR_ERR(adc_dev->adc_clk);
+	}
+
+	ret = clk_prepare_enable(adc_dev->adc_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable auxadc clock\n");
+		return ret;
+	}
+
+	adc_clk_rate = clk_get_rate(adc_dev->adc_clk);
+	if (!adc_clk_rate) {
+		dev_err(&pdev->dev, "null clock rate!\n");
+		goto err_disable_clk;
+	}
+
+	mutex_init(&adc_dev->lock);
+
+	val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
+	val |= MT6577_AUXADC_PDN_EN;
+	writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
+	mdelay(MT6577_AUXADC_POWER_READY_MS);
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register iio device!\n");
+		goto err_power_off;
+	}
+
+	return 0;
+
+err_power_off:
+	val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
+	val &= ~MT6577_AUXADC_PDN_EN;
+	writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
+err_disable_clk:
+	clk_disable_unprepare(adc_dev->adc_clk);
+	return -EINVAL;
+}
+
+static int mt6577_auxadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
+	u32 val;
+
+	iio_device_unregister(indio_dev);
+
+	val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
+	val &= ~MT6577_AUXADC_PDN_EN;
+	writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
+
+	clk_disable_unprepare(adc_dev->adc_clk);
+
+	return 0;
+}
+
+static const struct of_device_id mt6577_auxadc_of_match[] = {
+	{ .compatible = "mediatek,mt2701-auxadc", },
+	{ .compatible = "mediatek,mt8173-auxadc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mt6577_auxadc_of_match);
+
+static struct platform_driver mt6577_auxadc_driver = {
+	.driver = {
+		.name   = "mt6577-auxadc",
+		.of_match_table = mt6577_auxadc_of_match,
+	},
+	.probe	= mt6577_auxadc_probe,
+	.remove	= mt6577_auxadc_remove,
+};
+module_platform_driver(mt6577_auxadc_driver);
+
+MODULE_AUTHOR("Zhiyong Tao <zhiyong.tao@mediatek.com>");
+MODULE_DESCRIPTION("MTK AUXADC Device Driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

Re: [PATCH v5 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.

[Jonathan Cameron]

On 21/07/16 09:17, Zhiyong Tao wrote:
> Add Mediatek auxadc driver based on iio.
> It will register a device in iio and support iio.
> So thermal can read auxadc channel to sample data by iio device.
> It is tested successfully on mt2701 platform.
> Mt8173 and mt6577 platforms are not tested.
> But the expectation is compatible.
> 
> Signed-off-by: Zhiyong Tao <zhiyong.tao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
As you are re spinning anyway to address Peter's comments one
more minor point from me inline

Shaping up to be a nice little driver.

Jonathan
> ---
>  drivers/iio/adc/Kconfig         |   13 ++
>  drivers/iio/adc/Makefile        |    1 +
>  drivers/iio/adc/mt6577_auxadc.c |  289 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 303 insertions(+)
>  create mode 100644 drivers/iio/adc/mt6577_auxadc.c
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 25378c5..14929fc 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -305,6 +305,19 @@ config MCP3422
>  	  This driver can also be built as a module. If so, the module will be
>  	  called mcp3422.
>  
> +config MEDIATEK_MT6577_AUXADC
> +        tristate "MediaTek AUXADC driver"
> +        depends on ARCH_MEDIATEK || COMPILE_TEST
> +        depends on HAS_IOMEM
> +        help
> +          Say yes here to enable support for MediaTek mt65xx AUXADC.
> +
> +          The driver supports immediate mode operation to read from one of sixteen
> +          channels (external or internal).
> +
> +          This driver can also be built as a module. If so, the module will be
> +          called mt6577_auxadc.
> +
>  config MEN_Z188_ADC
>  	tristate "MEN 16z188 ADC IP Core support"
>  	depends on MCB
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 38638d4..8306347 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_MAX1027) += max1027.o
>  obj-$(CONFIG_MAX1363) += max1363.o
>  obj-$(CONFIG_MCP320X) += mcp320x.o
>  obj-$(CONFIG_MCP3422) += mcp3422.o
> +obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
>  obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
>  obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
>  obj-$(CONFIG_NAU7802) += nau7802.o
> diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c
> new file mode 100644
> index 0000000..6240236
> --- /dev/null
> +++ b/drivers/iio/adc/mt6577_auxadc.c
> @@ -0,0 +1,289 @@
> +/*
> + * Copyright (c) 2016 MediaTek Inc.
> + * Author: Zhiyong Tao <zhiyong.tao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/iopoll.h>
> +#include <linux/io.h>
> +#include <linux/iio/iio.h>
> +
> +/* Register definitions */
> +#define MT6577_AUXADC_CON0                    0x00
> +#define MT6577_AUXADC_CON1                    0x04
> +#define MT6577_AUXADC_CON2                    0x10
> +#define MT6577_AUXADC_STA                     BIT(0)
> +
> +#define MT6577_AUXADC_DAT0                    0x14
> +#define MT6577_AUXADC_RDY0                    BIT(12)
> +
> +#define MT6577_AUXADC_MISC                    0x94
> +#define MT6577_AUXADC_PDN_EN                  BIT(14)
> +
> +#define MT6577_AUXADC_DAT_MASK                0xfff
> +#define MT6577_AUXADC_SLEEP_US                1000
> +#define MT6577_AUXADC_TIMEOUT_US              10000
> +#define MT6577_AUXADC_POWER_READY_MS          1
> +#define MT6577_AUXADC_SAMPLE_READY_US         25
> +
> +struct mt6577_auxadc_device {
> +	void __iomem *reg_base;
> +	struct clk *adc_clk;
> +	struct mutex lock;
> +};
> +
> +#define MT6577_AUXADC_CHANNEL(idx) {				    \
> +		.type = IIO_VOLTAGE,				    \
> +		.indexed = 1,					    \
> +		.channel = (idx),				    \
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
> +}
> +
> +static const struct iio_chan_spec mt6577_auxadc_iio_channels[] = {
> +	MT6577_AUXADC_CHANNEL(0),
> +	MT6577_AUXADC_CHANNEL(1),
> +	MT6577_AUXADC_CHANNEL(2),
> +	MT6577_AUXADC_CHANNEL(3),
> +	MT6577_AUXADC_CHANNEL(4),
> +	MT6577_AUXADC_CHANNEL(5),
> +	MT6577_AUXADC_CHANNEL(6),
> +	MT6577_AUXADC_CHANNEL(7),
> +	MT6577_AUXADC_CHANNEL(8),
> +	MT6577_AUXADC_CHANNEL(9),
> +	MT6577_AUXADC_CHANNEL(10),
> +	MT6577_AUXADC_CHANNEL(11),
> +	MT6577_AUXADC_CHANNEL(12),
> +	MT6577_AUXADC_CHANNEL(13),
> +	MT6577_AUXADC_CHANNEL(14),
> +	MT6577_AUXADC_CHANNEL(15),
> +};
> +
> +static int mt6577_auxadc_read(struct iio_dev *indio_dev,
> +			      struct iio_chan_spec const *chan)
> +{
> +	u32 rawdata, val;
> +	void __iomem *reg_channel;
> +	int ret;
> +	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
> +
> +	reg_channel = adc_dev->reg_base + MT6577_AUXADC_DAT0 +
> +		      chan->channel * 0x04;
> +
> +	mutex_lock(&adc_dev->lock);
> +
> +	val = readl(adc_dev->reg_base + MT6577_AUXADC_CON1);
> +	val &= ~(1 << chan->channel);
> +	writel(val, adc_dev->reg_base + MT6577_AUXADC_CON1);
> +
> +	/* read channel and make sure old ready bit == 0 */
> +	ret = readl_poll_timeout(reg_channel, val,
> +				 ((val & MT6577_AUXADC_RDY0) == 0),
> +				 MT6577_AUXADC_SLEEP_US,
> +				 MT6577_AUXADC_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(indio_dev->dev.parent,
> +			"wait for channel[%d] ready bit clear time out\n",
> +			chan->channel);
> +
> +		mutex_unlock(&adc_dev->lock);
I'd prefer a goto taking us to the mutex unlock a the
end of the driver.  Makes it harder to get editing
this driver and breaking the locking wrong in the
future!
> +
> +		return -ETIMEDOUT;
> +	}
> +
> +	/* set bit to trigger sample */
> +	val = readl(adc_dev->reg_base + MT6577_AUXADC_CON1);
> +	val |= 1 << chan->channel;
> +	writel(val, adc_dev->reg_base + MT6577_AUXADC_CON1);
> +
> +	/* we must delay here for hardware sample channel data */
> +	udelay(MT6577_AUXADC_SAMPLE_READY_US);
> +
> +	/* check MTK_AUXADC_CON2 if auxadc is idle */
> +	ret = readl_poll_timeout(adc_dev->reg_base + MT6577_AUXADC_CON2, val,
> +				 ((val & MT6577_AUXADC_STA) == 0),
> +				 MT6577_AUXADC_SLEEP_US,
> +				 MT6577_AUXADC_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(indio_dev->dev.parent,
> +			"wait for auxadc idle time out\n");
> +
> +		mutex_unlock(&adc_dev->lock);
> +
> +		return -ETIMEDOUT;
> +	}
> +
> +	/* read channel and make sure ready bit == 1 */
> +	ret = readl_poll_timeout(reg_channel, val,
> +				 ((val & MT6577_AUXADC_RDY0) != 0),
> +				 MT6577_AUXADC_SLEEP_US,
> +				 MT6577_AUXADC_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(indio_dev->dev.parent,
> +			"wait for channel[%d] data ready time out\n",
> +			chan->channel);
> +
> +		mutex_unlock(&adc_dev->lock);
> +
> +		return -ETIMEDOUT;
> +	}
> +
> +	/* read data */
> +	rawdata = readl(reg_channel) & MT6577_AUXADC_DAT_MASK;
> +
> +	mutex_unlock(&adc_dev->lock);
> +
> +	return rawdata;
> +}
> +
> +static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev,
> +				  struct iio_chan_spec const *chan,
> +				  int *val,
> +				  int *val2,
> +				  long info)
> +{
> +	switch (info) {
> +	case IIO_CHAN_INFO_PROCESSED:
> +		*val = mt6577_auxadc_read(indio_dev, chan);
> +		if (*val < 0) {
> +			dev_err(indio_dev->dev.parent,
> +				"failed to sample data on channel[%d]\n",
> +				chan->channel);
> +			return *val;
> +		}
> +		return IIO_VAL_INT;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static const struct iio_info mt6577_auxadc_info = {
> +	.driver_module = THIS_MODULE,
> +	.read_raw = &mt6577_auxadc_read_raw,
> +};
> +
> +static int mt6577_auxadc_probe(struct platform_device *pdev)
> +{
> +	struct mt6577_auxadc_device *adc_dev;
> +	unsigned long adc_clk_rate;
> +	struct resource *res;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +	u32 val;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	adc_dev = iio_priv(indio_dev);
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->name = dev_name(&pdev->dev);
> +	indio_dev->info = &mt6577_auxadc_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->channels = mt6577_auxadc_iio_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(mt6577_auxadc_iio_channels);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	adc_dev->reg_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(adc_dev->reg_base)) {
> +		dev_err(&pdev->dev, "failed to get auxadc base address.\n");
> +		return PTR_ERR(adc_dev->reg_base);
> +	}
> +
> +	adc_dev->adc_clk = devm_clk_get(&pdev->dev, "main");
> +	if (IS_ERR(adc_dev->adc_clk)) {
> +		dev_err(&pdev->dev, "failed to get auxadc clock\n");
> +		return PTR_ERR(adc_dev->adc_clk);
> +	}
> +
> +	ret = clk_prepare_enable(adc_dev->adc_clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to enable auxadc clock\n");
> +		return ret;
> +	}
> +
> +	adc_clk_rate = clk_get_rate(adc_dev->adc_clk);
> +	if (!adc_clk_rate) {
> +		dev_err(&pdev->dev, "null clock rate!\n");
> +		goto err_disable_clk;
> +	}
> +
> +	mutex_init(&adc_dev->lock);
> +
> +	val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
> +	val |= MT6577_AUXADC_PDN_EN;
> +	writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
> +	mdelay(MT6577_AUXADC_POWER_READY_MS);
> +
> +	platform_set_drvdata(pdev, indio_dev);
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "failed to register iio device!\n");
> +		goto err_power_off;
> +	}
> +
> +	return 0;
> +
> +err_power_off:
> +	val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
> +	val &= ~MT6577_AUXADC_PDN_EN;
> +	writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
> +err_disable_clk:
> +	clk_disable_unprepare(adc_dev->adc_clk);
> +	return -EINVAL;
> +}
> +
> +static int mt6577_auxadc_remove(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
> +	u32 val;
> +
> +	iio_device_unregister(indio_dev);
> +
> +	val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
> +	val &= ~MT6577_AUXADC_PDN_EN;
> +	writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
> +
> +	clk_disable_unprepare(adc_dev->adc_clk);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mt6577_auxadc_of_match[] = {
> +	{ .compatible = "mediatek,mt2701-auxadc", },
> +	{ .compatible = "mediatek,mt8173-auxadc", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, mt6577_auxadc_of_match);
> +
> +static struct platform_driver mt6577_auxadc_driver = {
> +	.driver = {
> +		.name   = "mt6577-auxadc",
> +		.of_match_table = mt6577_auxadc_of_match,
> +	},
> +	.probe	= mt6577_auxadc_probe,
> +	.remove	= mt6577_auxadc_remove,
> +};
> +module_platform_driver(mt6577_auxadc_driver);
> +
> +MODULE_AUTHOR("Zhiyong Tao <zhiyong.tao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>");
> +MODULE_DESCRIPTION("MTK AUXADC Device Driver");
> +MODULE_LICENSE("GPL v2");
> 

[PATCH v5 3/3] arm: dts: mt2701: Add auxadc node.

[Zhiyong Tao]

The commit adds auxadc nodes to the Mediatek MT2701 dtsi file.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
---
 arch/arm/boot/dts/mt2701.dtsi |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 42d5a37..c0a2644 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -187,6 +187,15 @@
 		      <0 0x10216000 0 0x2000>;
 	};
 
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt2701-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
 	uart0: serial@11002000 {
 		compatible = "mediatek,mt2701-uart",
 			     "mediatek,mt6577-uart";
-- 
1.7.9.5

Re: [PATCH v5 3/3] arm: dts: mt2701: Add auxadc node.

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1054 bytes --]

Hi,

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.7-rc7 next-20160721]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Zhiyong-Tao/AUXADC-Mediatek-auxadc-driver/20160722-041141
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-at91_dt_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 5.4.0-6) 5.4.0 20160609
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> Error: arch/arm/boot/dts/mt2701.dtsi:145.22-23 syntax error
   FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 21319 bytes --]

Re: [PATCH v5 3/3] arm: dts: mt2701: Add auxadc node.

[zhiyong tao]

On Fri, 2016-07-22 at 06:08 +0800, kbuild test robot wrote:

sorry, I forget to add this information:
---
This patch dependents on "Add clock support for Mediatek MT2701"[1].
Please accept this patch together with [1].
[1]http://lists.infradead.org/pipermail/linux-mediatek/2016-June/005969.html
---
I will add this information in next version commit message.

> Hi,
> 
> [auto build test ERROR on robh/for-next]
> [also build test ERROR on v4.7-rc7 next-20160721]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
> 
> url:    https://github.com/0day-ci/linux/commits/Zhiyong-Tao/AUXADC-Mediatek-auxadc-driver/20160722-041141
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
> config: arm-at91_dt_defconfig (attached as .config)
> compiler: arm-linux-gnueabi-gcc (Debian 5.4.0-6) 5.4.0 20160609
> reproduce:
>         wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # save the attached .config to linux build tree
>         make.cross ARCH=arm 
> 
> All errors (new ones prefixed by >>):
> 
> >> Error: arch/arm/boot/dts/mt2701.dtsi:145.22-23 syntax error
>    FATAL ERROR: Unable to parse input tree
> 
> ---
> 0-DAY kernel test infrastructure                Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Re: [PATCH v5 3/3] arm: dts: mt2701: Add auxadc node.

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1048 bytes --]

Hi,

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.7-rc7 next-20160722]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Zhiyong-Tao/AUXADC-Mediatek-auxadc-driver/20160724-043228
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-allnoconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 5.4.0-6) 5.4.0 20160609
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

   Error: arch/arm/boot/dts/mt2701.dtsi:145.22-23 syntax error
>> FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 5589 bytes --]