From: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
To: daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org,
andrew-zrmu5oMJ5Fs@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org
Subject: [PATCH v2 3/3] drivers/clocksource/moxart: Add Aspeed support
Date: Thu, 21 Jul 2016 23:13:53 +0930 [thread overview]
Message-ID: <1469108633-7940-4-git-send-email-joel@jms.id.au> (raw)
In-Reply-To: <1469108633-7940-1-git-send-email-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
The Aspeed SoC has timer IP with a very similar register layout to the
moxart timer. This patch adds support for the fourth and fifth gen
aspeed SoCs, and has been tested on the ast2400 and ast2500.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../bindings/timer/moxa,moxart-timer.txt | 4 ++-
drivers/clocksource/moxart_timer.c | 32 ++++++++++++++++++++++
2 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt b/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt
index da2d510cae47..e207c11630af 100644
--- a/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt
+++ b/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt
@@ -2,7 +2,9 @@ MOXA ART timer
Required properties:
-- compatible : Must be "moxa,moxart-timer"
+- compatible : Must be one of:
+ - "moxa,moxart-timer"
+ - "aspeed,ast2400-timer"
- reg : Should contain registers location and length
- interrupts : Should contain the timer interrupt number
- clocks : Should contain phandle for the clock that drives the counter
diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c
index cb0b34786a8e..ad2bead9ce45 100644
--- a/drivers/clocksource/moxart_timer.c
+++ b/drivers/clocksource/moxart_timer.c
@@ -56,6 +56,23 @@
#define MOXART_TIMER1_ENABLE (MOXART_CR_2_ENABLE | MOXART_CR_1_ENABLE)
#define MOXART_TIMER1_DISABLE (MOXART_CR_2_ENABLE)
+/*
+ * The ASpeed variant of the IP block has a different layout
+ * for the control register
+ */
+#define ASPEED_CR_1_ENABLE BIT(0)
+#define ASPEED_CR_1_CLOCK BIT(1)
+#define ASPEED_CR_1_INT BIT(2)
+#define ASPEED_CR_2_ENABLE BIT(4)
+#define ASPEED_CR_2_CLOCK BIT(5)
+#define ASPEED_CR_2_INT BIT(6)
+#define ASPEED_CR_3_ENABLE BIT(8)
+#define ASPEED_CR_3_CLOCK BIT(9)
+#define ASPEED_CR_3_INT BIT(10)
+
+#define ASPEED_TIMER1_ENABLE (ASPEED_CR_2_ENABLE | ASPEED_CR_1_ENABLE)
+#define ASPEED_TIMER1_DISABLE (ASPEED_CR_2_ENABLE)
+
struct moxart_timer {
void __iomem *base;
unsigned int t1_disable_val;
@@ -165,6 +182,9 @@ static int __init moxart_timer_init(struct device_node *node)
if (of_device_is_compatible(node, "moxa,moxart-timer")) {
timer->t1_enable_val = MOXART_TIMER1_ENABLE;
timer->t1_disable_val = MOXART_TIMER1_DISABLE;
+ } else if (of_device_is_compatible(node, "aspeed,ast2400-timer")) {
+ timer->t1_enable_val = ASPEED_TIMER1_ENABLE;
+ timer->t1_disable_val = ASPEED_TIMER1_DISABLE;
} else
panic("%s: unknown platform\n", node->full_name);
@@ -200,6 +220,17 @@ static int __init moxart_timer_init(struct device_node *node)
return ret;
}
+ /* Clear match registers */
+ writel(0, timer->base + TIMER1_BASE + REG_MATCH1);
+ writel(0, timer->base + TIMER1_BASE + REG_MATCH2);
+ writel(0, timer->base + TIMER2_BASE + REG_MATCH1);
+ writel(0, timer->base + TIMER2_BASE + REG_MATCH2);
+
+ /*
+ * Start timer 2 rolling as our main wall clock source, keep timer 1
+ * disabled
+ */
+ writel(0, timer->base + TIMER_CR);
writel(~0, timer->base + TIMER2_BASE + REG_LOAD);
writel(timer->t1_disable_val, timer->base + TIMER_CR);
@@ -214,3 +245,4 @@ static int __init moxart_timer_init(struct device_node *node)
return 0;
}
CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init);
+CLOCKSOURCE_OF_DECLARE(aspeed, "aspeed,ast2400-timer", moxart_timer_init);
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-07-21 13:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-21 13:43 [PATCH v2 0/3] clocksource: Add support for Aspeed timer Joel Stanley
[not found] ` <1469108633-7940-1-git-send-email-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2016-07-21 13:43 ` [PATCH v2 1/3] drivers/clocksource/moxart: Refactor enable/disable Joel Stanley
2016-07-21 13:43 ` [PATCH v2 2/3] drivers/clocksource/moxart: Use struct to hold state Joel Stanley
2016-07-21 13:43 ` Joel Stanley [this message]
2016-09-08 13:57 ` [PATCH v2 0/3] clocksource: Add support for Aspeed timer Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469108633-7940-4-git-send-email-joel@jms.id.au \
--to=joel-u3u1mxzcp9khxe+lvdladg@public.gmane.org \
--cc=andrew-zrmu5oMJ5Fs@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
--cc=daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
--cc=jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).