From: Jon Mason <jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
To: f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 08/11] ARM: dts: NSP: Add new DT file for bcm958522er
Date: Wed, 3 Aug 2016 14:39:03 -0400 [thread overview]
Message-ID: <1470249546-12440-9-git-send-email-jon.mason@broadcom.com> (raw)
In-Reply-To: <1470249546-12440-1-git-send-email-jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Create a new device tree file for the Broadcom Northstar Plus
bcm958522er SVK. This SVK has 2GB RAM, 2 ports Ethernet, 2 PCI slots,
and 1 UART. Also, it has the ability to reboot via GPIO. To be added
in the future is support for the USB.
Signed-off-by: Jon Mason <jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm958522er.dts | 130 ++++++++++++++++++++++++++++++++++++++
2 files changed, 131 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958522er.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8a05bf6..7c04e31 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -99,6 +99,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm21664-garnet.dtb \
bcm23550-sparrow.dtb
dtb-$(CONFIG_ARCH_BCM_NSP) += \
+ bcm958522er.dtb \
bcm958525er.dtb \
bcm958525xmc.dtb \
bcm958625hr.dtb \
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
new file mode 100644
index 0000000..a21b0fd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -0,0 +1,130 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "NorthStar Plus SVK (BCM958522ER)";
+ compatible = "brcm,bcm58522", "brcm,nsp";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ priority = <200>;
+ };
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+ status = "okay";
+};
+
+
+&amac1 {
+ status = "okay";
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "nrootfs";
+ reg = <0x01000000 0x03000000>;
+ };
+ partition@4000000 {
+ label = "ncustfs";
+ reg = <0x04000000 0x3c000000>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>;
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-03 18:39 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-03 18:38 [PATCH 00/11] ARM: dts: NSP: define SATA, Reboot, RAM and new device tree files Jon Mason
2016-08-03 18:38 ` [PATCH 01/11] ARM: dts: NSP: Enable SATA on bcm958625hr Jon Mason
2016-08-03 18:38 ` [PATCH 02/11] ARM: dts: NSP: Enable SATA and add i2c devices on XMC Jon Mason
2016-08-03 18:38 ` [PATCH 04/11] ARM: dts: NSP: Specify RAM amount for BCM958525XMC board Jon Mason
2016-08-03 18:39 ` [PATCH 05/11] ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file Jon Mason
2016-08-03 18:39 ` [PATCH 06/11] ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc " Jon Mason
2016-08-03 18:39 ` [PATCH 07/11] ARM: dts: NSP: Add new DT file for bcm958525er Jon Mason
2016-08-03 18:39 ` [PATCH 10/11] ARM: dts: NSP: Add new DT file for bcm958623hr Jon Mason
[not found] ` <1470249546-12440-1-git-send-email-jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2016-08-03 18:38 ` [PATCH 03/11] ARM: dts: NSP: Specify RAM amount for BCM958625K board Jon Mason
2016-08-03 18:39 ` Jon Mason [this message]
2016-08-03 18:39 ` [PATCH 09/11] ARM: dts: NSP: Add new DT file for bcm988312hr Jon Mason
2016-08-03 18:39 ` [PATCH 11/11] ARM: dts: NSP: Add new DT file for bcm958622hr Jon Mason
2016-08-09 1:42 ` [PATCH 00/11] ARM: dts: NSP: define SATA, Reboot, RAM and new device tree files Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470249546-12440-9-git-send-email-jon.mason@broadcom.com \
--to=jon.mason-dy08kvg/lbpwk0htik3j/w@public.gmane.org \
--cc=bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).