Re: [PATCH v6 10/10] arm: dts: mt2701: Add display subsystem related nodes for MT2701

From: CK Hu <ck.hu@mediatek.com>
To: YT Shen <yt.shen@mediatek.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Russell King <linux@arm.linux.org.uk>,
	Pawel Moll <pawel.moll@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	emil.l.velikov@gmail.com, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org,
	Mao Huang <littlecvr@chromium.org>,
	srv_heupstream@mediatek.com, Rob Herring <robh+dt@kernel.org>,
	linux-mediatek@lists.infradead.org,
	Kumar Gala <galak@codeaurora.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	yingjoe.chen@mediatek.com, Sascha Hauer <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 10/10] arm: dts: mt2701: Add display subsystem related nodes for MT2701
Date: Fri, 5 Aug 2016 14:18:26 +0800	[thread overview]
Message-ID: <1470377906.16554.23.camel@mtksdaap41> (raw)
In-Reply-To: <1470308844-20895-11-git-send-email-yt.shen@mediatek.com>

Hi, YT:

On Thu, 2016-08-04 at 19:07 +0800, YT Shen wrote:
> This patch adds the device nodes for the DISP function blocks for MT2701
> 
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> ---
>  arch/arm/boot/dts/mt2701.dtsi |   86 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> index f3136bd..8f35a0d 100644
> --- a/arch/arm/boot/dts/mt2701.dtsi
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -24,6 +24,11 @@
>  	compatible = "mediatek,mt2701";
>  	interrupt-parent = <&sysirq>;
>  
> +	aliases {
> +		rdma0 = &rdma0;
> +		rdma1 = &rdma1;
> +	};
> +
>  	cpus {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> @@ -171,6 +176,16 @@
>  		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
>  	};
>  
> +	mipi_tx0: mipi-dphy@10010000 {
> +		compatible = "mediatek,mt2701-mipi-tx";
> +		reg = <0 0x10010000 0 0x90>;
> +		clocks = <&clk26m>;
> +		clock-output-names = "mipi_tx0_pll";
> +		#clock-cells = <0>;
> +		#phy-cells = <0>;
> +		status = "disabled";
> +	};
> +
>  	sysirq: interrupt-controller@10200100 {
>  		compatible = "mediatek,mt2701-sysirq",
>  			     "mediatek,mt6577-sysirq";
> @@ -255,6 +270,68 @@
>  		status = "disabled";
>  	};
>  
> +	ovl@14007000 {
> +		compatible = "mediatek,mt2701-disp-ovl";
> +		reg = <0 0x14007000 0 0x1000>;
> +		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&mmsys CLK_MM_DISP_OVL>;
> +		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
> +		mediatek,larb = <&larb0>;
> +	};
> +
> +	rdma0: rdma@14008000 {
> +		compatible = "mediatek,mt2701-disp-rdma";
> +		reg = <0 0x14008000 0 0x1000>;
> +		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&mmsys CLK_MM_DISP_RDMA>;
> +		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
> +		mediatek,larb = <&larb0>;
> +	};
> +
> +	wdma@14009000 {
> +		compatible = "mediatek,mt2701-disp-wdma";
> +		reg = <0 0x14009000 0 0x1000>;
> +		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&mmsys CLK_MM_DISP_WDMA>;
> +		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
> +		mediatek,larb = <&larb0>;
> +	};
> +
> +	bls@1400a000 {
> +		compatible = "mediatek,mt2701-disp-pwm";
> +		reg = <0 0x1400a000 0 0x1000>;
> +		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&mmsys CLK_MM_DISP_BLS>;
> +	};

You depends on [1], but that series include [2] which also add a
disp_bls node which has the same compatible string
"mediatek,mt2701-disp-pwm". If these two node are the same, just add it
in one patch. If they are different, do not use the same compatible
string.

[1] https://patchwork.kernel.org/patch/9222997/ ("dt-bindings: pwm: Add
MediaTek display PWM bindings")
[2] https://patchwork.kernel.org/patch/9223005/
> +
> +	color@1400b000 {
> +		compatible = "mediatek,mt2701-disp-color";
> +		reg = <0 0x1400b000 0 0x1000>;
> +		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&mmsys CLK_MM_DISP_COLOR>;
> +	};
> +
> +	dsi0: dsi@1400c000 {
> +		compatible = "mediatek,mt2701-dsi";
> +		reg = <0 0x1400c000 0 0x1000>;
> +		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&mmsys CLK_MM_DSI_ENGINE>, <&mmsys CLK_MM_DSI_DIG>,
> +			 <&mipi_tx0>;
> +		clock-names = "engine", "digital", "hs";
> +		mediatek,syscon-dsi = <&mmsys 0x138>;
> +		mediatek,ssc-range = <5>;
> +		phys = <&mipi_tx0>;
> +		phy-names = "dphy";
> +		status = "disabled";
> +	};
> +
> +	mutex: mutex@1400e000 {
> +		compatible = "mediatek,mt2701-disp-mutex";
> +		reg = <0 0x1400e000 0 0x1000>;
> +		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&mmsys CLK_MM_MUTEX_32K>;
> +	};
> +
>  	larb0: larb@14010000 {
>  		compatible = "mediatek,mt2701-smi-larb";
>  		reg = <0 0x14010000 0 0x1000>;
> @@ -266,6 +343,15 @@
>  		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
>  	};
>  
> +	rdma1: rdma@14012000 {
> +		compatible = "mediatek,mt2701-disp-rdma";
> +		reg = <0 0x14012000 0 0x1000>;
> +		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> +		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
> +		mediatek,larb = <&larb0>;
> +	};
> +
>  	imgsys: syscon@15000000 {
>  		compatible = "mediatek,mt2701-imgsys", "syscon";
>  		reg = <0 0x15000000 0 0x1000>;

Regards,
CK

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel