From: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: Jaehoon Chung
<jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: [PATCH v2 3/6] mmc: dw_mmc: split out dw_mci_set_power
Date: Sun, 7 Aug 2016 09:34:38 +0800 [thread overview]
Message-ID: <1470533678-16441-1-git-send-email-shawn.lin@rock-chips.com> (raw)
In-Reply-To: <1470533618-16312-1-git-send-email-shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
The dw_mci_set_ios is a little complicated and lengthy,
let's split out the setting of power part. No functionality
change.
Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v2: None
drivers/mmc/host/dw_mmc.c | 87 ++++++++++++++++++++++++++---------------------
1 file changed, 49 insertions(+), 38 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 59a5e9c..0e5ed23 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1276,54 +1276,19 @@ static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
spin_unlock_bh(&host->lock);
}
-static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+static int dw_mci_set_power(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
- const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 regs;
- switch (ios->bus_width) {
- case MMC_BUS_WIDTH_4:
- slot->ctype = SDMMC_CTYPE_4BIT;
- break;
- case MMC_BUS_WIDTH_8:
- slot->ctype = SDMMC_CTYPE_8BIT;
- break;
- default:
- /* set default 1 bit mode */
- slot->ctype = SDMMC_CTYPE_1BIT;
- }
-
- regs = mci_readl(slot->host, UHS_REG);
-
- /* DDR mode set */
- if (ios->timing == MMC_TIMING_MMC_DDR52 ||
- ios->timing == MMC_TIMING_UHS_DDR50 ||
- ios->timing == MMC_TIMING_MMC_HS400)
- regs |= ((0x1 << slot->id) << 16);
- else
- regs &= ~((0x1 << slot->id) << 16);
-
- mci_writel(slot->host, UHS_REG, regs);
- slot->host->timing = ios->timing;
-
- /*
- * Use mirror of ios->clock to prevent race with mmc
- * core ios update when finding the minimum.
- */
- slot->clock = ios->clock;
-
- if (drv_data && drv_data->set_ios)
- drv_data->set_ios(slot->host, ios);
-
switch (ios->power_mode) {
case MMC_POWER_UP:
if (!IS_ERR(mmc->supply.vmmc) &&
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd)) {
dev_err(slot->host->dev,
"failed to enable vmmc regulator\n");
- /*return, if failed turn on vmmc*/
- return;
+
+ return -EINVAL;
}
set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
regs = mci_readl(slot->host, PWREN);
@@ -1369,6 +1334,52 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
break;
}
+ return 0;
+}
+
+static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct dw_mci_slot *slot = mmc_priv(mmc);
+ const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
+ u32 regs;
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_4:
+ slot->ctype = SDMMC_CTYPE_4BIT;
+ break;
+ case MMC_BUS_WIDTH_8:
+ slot->ctype = SDMMC_CTYPE_8BIT;
+ break;
+ default:
+ /* set default 1 bit mode */
+ slot->ctype = SDMMC_CTYPE_1BIT;
+ }
+
+ regs = mci_readl(slot->host, UHS_REG);
+
+ /* DDR mode set */
+ if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_UHS_DDR50 ||
+ ios->timing == MMC_TIMING_MMC_HS400)
+ regs |= ((0x1 << slot->id) << 16);
+ else
+ regs &= ~((0x1 << slot->id) << 16);
+
+ mci_writel(slot->host, UHS_REG, regs);
+ slot->host->timing = ios->timing;
+
+ /*
+ * Use mirror of ios->clock to prevent race with mmc
+ * core ios update when finding the minimum.
+ */
+ slot->clock = ios->clock;
+
+ if (drv_data && drv_data->set_ios)
+ drv_data->set_ios(slot->host, ios);
+
+ if (dw_mci_set_power(mmc, ios))
+ return;
+
if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
slot->host->state = STATE_IDLE;
}
--
2.3.7
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-07 1:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20160807013720epcas1p235628058a90efa6f0062b03a4b2e4284@epcas1p2.samsung.com>
2016-08-07 1:33 ` [PATCH v2 0/6] Add support of inverting power control and some minor cleanup Shawn Lin
[not found] ` <1470533618-16312-1-git-send-email-shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-08-07 1:34 ` [PATCH v2 1/6] dt-bindings: rockchip-dw-mshc: add description of rockchip,power-invert Shawn Lin
[not found] ` <1470533644-16357-1-git-send-email-shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-08-10 18:46 ` Rob Herring
2016-08-07 1:34 ` Shawn Lin [this message]
2016-08-07 1:34 ` [PATCH v2 2/6] mmc: dw_mmc: cleanup power setting of set_ios callback Shawn Lin
2016-08-07 1:34 ` [PATCH v2 4/6] mmc: dw_mmc: split out dw_mci_set_power_reg Shawn Lin
2016-08-07 1:34 ` [PATCH v2 5/6] mmc: dw_mmc: support inverted power control Shawn Lin
2016-08-07 1:35 ` [PATCH v2 6/6] mmc: dw_mmc-rockchip: add parsing of power control from DT Shawn Lin
2016-08-08 10:24 ` [PATCH v2 0/6] Add support of inverting power control and some minor cleanup Jaehoon Chung
2016-08-09 1:49 ` Shawn Lin
2016-08-09 2:12 ` Shawn Lin
2016-08-11 10:08 ` Jaehoon Chung
2016-08-12 2:57 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470533678-16441-1-git-send-email-shawn.lin@rock-chips.com \
--to=shawn.lin-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).