From: Kedareswara rao Appana <appana.durga.rao-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org,
gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] net: macb: add phy-handle support for the macb
Date: Sat, 13 Aug 2016 15:31:49 +0530 [thread overview]
Message-ID: <1471082509-11764-1-git-send-email-appanad@xilinx.com> (raw)
This patch adds support for the 'phy-handle' binding which allows for a
system to specifically select a phy which can be attached via any MDIO
bus available in the system.
Signed-off-by: Kedareswara rao Appana <appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
---
Documentation/devicetree/bindings/net/macb.txt | 3 +++
drivers/net/ethernet/cadence/macb.c | 11 +++++++++--
drivers/net/ethernet/cadence/macb.h | 1 +
3 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index b5a42df..3cfff7c 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -23,6 +23,9 @@ Required properties:
Optional elements: 'tx_clk'
- clocks: Phandles to input clocks.
+Optional properties:
+- phy-handle : See ethernet.txt file in the same directory.
+
Optional properties for PHY child node:
- reset-gpios : Should specify the gpio for phy reset
- magic-packet : If present, indicates that the hardware supports waking
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 6b797e3..4ddd45d 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -421,7 +421,7 @@ static int macb_mii_probe(struct net_device *dev)
static int macb_mii_init(struct macb *bp)
{
struct macb_platform_data *pdata;
- struct device_node *np;
+ struct device_node *np, *np1;
int err = -ENXIO, i;
/* Enable management port */
@@ -445,7 +445,13 @@ static int macb_mii_init(struct macb *bp)
dev_set_drvdata(&bp->dev->dev, bp->mii_bus);
np = bp->pdev->dev.of_node;
- if (np) {
+ np1 = of_get_parent(bp->phy_node);
+ if (np1) {
+ of_node_put(np1);
+ err = of_mdiobus_register(bp->mii_bus, np1);
+ if (err)
+ goto err_out_unregister_bus;
+ } else if (np) {
/* try dt phy registration */
err = of_mdiobus_register(bp->mii_bus, np);
@@ -3016,6 +3022,7 @@ static int macb_probe(struct platform_device *pdev)
} else {
bp->phy_interface = err;
}
+ bp->phy_node = of_parse_phandle(np, "phy-handle", 0);
/* IP specific init */
err = init(pdev);
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index aa3aeec..83d1617 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -855,6 +855,7 @@ struct macb {
unsigned int jumbo_max_len;
u32 wol;
+ struct device_node *phy_node;
};
static inline bool macb_is_gem(struct macb *bp)
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-08-13 10:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-13 10:01 Kedareswara rao Appana [this message]
2016-08-13 18:52 ` [PATCH] net: macb: add phy-handle support for the macb David Miller
2016-08-16 7:01 ` Appana Durga Kedareswara Rao
2016-08-16 20:14 ` Andrew Lunn
[not found] ` <20160816201436.GB3751-g2DYL2Zd6BY@public.gmane.org>
2016-08-18 15:53 ` Appana Durga Kedareswara Rao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471082509-11764-1-git-send-email-appanad@xilinx.com \
--to=appana.durga.rao-gjffaj9ahvfqt0dzr+alfa@public.gmane.org \
--cc=appanad-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).