[PATCH v2 0/3] ARM: dts: sun6i: tablet dts changes

[PATCH v2 0/3] ARM: dts: sun6i: tablet dts changes

[Hans de Goede]

Hi Maxime and Chen-Yu,

Here is a v2 of the series I sent earlier today, changes:

-Add a 3th patch (patch 1/3) which I forgot in v1, the other
 2 patches actually depend on this one to apply without conflicts
-Name the added dtsi file sun6i-reference-design-tablet.dtsi instead
 of sun6i-a31-reference-design-tablet.dtsi, to be consistent with
 what we've done for sun5i / sun8i (and because it is valid for
 both A31 and A31s based tablets).

Regards,

Hans

[PATCH v2 1/3] ARM: dts: sun6i: colorfly-e708-q1: Remove unused mma8452_int_e708_q1 node

[Hans de Goede]

The presence of the mma8452_int_e708_q1 node is a copy and paste
error, remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
index 9040bb9..34d8710 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -93,13 +93,6 @@
 };
 
 &pio {
-	mma8452_int_e708_q1: mma8452_int_pin@0 {
-		allwinner,pins = "PA9";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
 	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
 		allwinner,pins = "PA8";
 		allwinner,function = "gpio_in";
-- 
2.7.4

Re: [PATCH v2 1/3] ARM: dts: sun6i: colorfly-e708-q1: Remove unused mma8452_int_e708_q1 node

[Chen-Yu Tsai]

On Fri, Aug 19, 2016 at 2:02 AM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
> The presence of the mma8452_int_e708_q1 node is a copy and paste
> error, remove it.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

[Hans de Goede]

Just like with a13/a23/a33 most a31 tablets are derived from the same
reference design. Add a .dtsi file with all the common bits to avoid
endless copy and pasting of these.

The sun6i-reference-design-tablet.dtsi this commit adds is a copy
of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
removed / left in sun6i-a31s-colorfly-e708-q1.dts.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts  | 147 +--------------------
 ...8-q1.dts => sun6i-reference-design-tablet.dtsi} |  26 +---
 2 files changed, 2 insertions(+), 171 deletions(-)
 copy arch/arm/boot/dts/{sun6i-a31s-colorfly-e708-q1.dts => sun6i-reference-design-tablet.dtsi} (90%)

diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
index 34d8710..882a4d8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -42,32 +42,11 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun6i-reference-design-tablet.dtsi"
 
 / {
 	model = "Colorfly E708 Q1 tablet";
 	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc3>;
-};
-
-&ehci0 {
-	/* rtl8188etv wifi is connected here */
-	status = "okay";
 };
 
 &lradc {
@@ -82,136 +61,12 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
-	vmmc-supply = <&reg_dcdc1>;
-	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PA15";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&p2wi {
-	status = "okay";
-
-	axp22x: pmic@68 {
-		compatible = "x-powers,axp221";
-		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		drivevbus-supply = <&reg_vcc5v0>;
-		x-powers,drive-vbus-en;
-	};
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpus"; /* This is an educated guess */
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-gpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc4 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-sys-dll";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
 &reg_dldo2 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 	regulator-name = "vcc-pg";
 };
 
-&reg_drivevbus {
-	regulator-name = "usb0-vbus";
-	status = "okay";
-};
-
 &simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
 	vcc-pg-supply = <&reg_dldo2>;
 };
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb_power_supply {
-	status = "okay";
-};
-
-&usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
-	usb0_vbus_power-supply = <&usb_power_supply>;
-	usb0_vbus-supply = <&reg_drivevbus>;
-	usb1_vbus-supply = <&reg_dldo1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
similarity index 90%
copy from arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
copy to arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
index 34d8710..0c43430 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -40,8 +40,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-#include "sun6i-a31s.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -49,9 +47,6 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
-	model = "Colorfly E708 Q1 tablet";
-	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
-
 	aliases {
 		serial0 = &uart0;
 	};
@@ -66,20 +61,8 @@
 };
 
 &ehci0 {
-	/* rtl8188etv wifi is connected here */
-	status = "okay";
-};
-
-&lradc {
-	vref-supply = <&reg_aldo3>;
+	/* Wifi is connected here */
 	status = "okay";
-
-	button@1000 {
-		label = "Home";
-		linux,code = <KEY_HOMEPAGE>;
-		channel = <0>;
-		voltage = <1000000>;
-	};
 };
 
 &mmc0 {
@@ -181,12 +164,6 @@
 	regulator-name = "vcc-wifi";
 };
 
-&reg_dldo2 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-name = "vcc-pg";
-};
-
 &reg_drivevbus {
 	regulator-name = "usb0-vbus";
 	status = "okay";
@@ -194,7 +171,6 @@
 
 &simplefb_lcd {
 	vcc-lcd-supply = <&reg_dc1sw>;
-	vcc-pg-supply = <&reg_dldo2>;
 };
 
 &usb_otg {
-- 
2.7.4

Re: [PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

[Icenowy Zheng]

19.08.2016, 02:07, "Hans de Goede" <hdegoede@redhat.com>:
> Just like with a13/a23/a33 most a31 tablets are derived from the same
> reference design. Add a .dtsi file with all the common bits to avoid
> endless copy and pasting of these.
>
> The sun6i-reference-design-tablet.dtsi this commit adds is a copy
> of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
> removed / left in sun6i-a31s-colorfly-e708-q1.dts.

Thanks! I will soon rebase my dt of Viewsonic Viewpad 133Q (a 13.3" A31s
tablet) on the reference design.

It makes it more tidy.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts | 147 +--------------------
>  ...8-q1.dts => sun6i-reference-design-tablet.dtsi} | 26 +---
>  2 files changed, 2 insertions(+), 171 deletions(-)
>  copy arch/arm/boot/dts/{sun6i-a31s-colorfly-e708-q1.dts => sun6i-reference-design-tablet.dtsi} (90%)
>
> diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> index 34d8710..882a4d8 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> @@ -42,32 +42,11 @@
>
>  /dts-v1/;
>  #include "sun6i-a31s.dtsi"
> -#include "sunxi-common-regulators.dtsi"
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/pinctrl/sun4i-a10.h>
> +#include "sun6i-reference-design-tablet.dtsi"
>
>  / {
>          model = "Colorfly E708 Q1 tablet";
>          compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
> -
> - aliases {
> - serial0 = &uart0;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -};
> -
> -&cpu0 {
> - cpu-supply = <&reg_dcdc3>;
> -};
> -
> -&ehci0 {
> - /* rtl8188etv wifi is connected here */
> - status = "okay";
>  };
>
>  &lradc {
> @@ -82,136 +61,12 @@
>          };
>  };
>
> -&mmc0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
> - vmmc-supply = <&reg_dcdc1>;
> - bus-width = <4>;
> - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
> - cd-inverted;
> - status = "okay";
> -};
> -
> -&pio {
> - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
> - allwinner,pins = "PA8";
> - allwinner,function = "gpio_in";
> - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> - };
> -
> - usb0_id_detect_pin: usb0_id_detect_pin@0 {
> - allwinner,pins = "PA15";
> - allwinner,function = "gpio_in";
> - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> - };
> -};
> -
> -&p2wi {
> - status = "okay";
> -
> - axp22x: pmic@68 {
> - compatible = "x-powers,axp221";
> - reg = <0x68>;
> - interrupt-parent = <&nmi_intc>;
> - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> - drivevbus-supply = <&reg_vcc5v0>;
> - x-powers,drive-vbus-en;
> - };
> -};
> -
> -#include "axp22x.dtsi"
> -
> -&reg_aldo3 {
> - regulator-always-on;
> - regulator-min-microvolt = <2700000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "avcc";
> -};
> -
> -&reg_dc1sw {
> - regulator-name = "vcc-lcd";
> -};
> -
> -&reg_dc5ldo {
> - regulator-always-on;
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-cpus"; /* This is an educated guess */
> -};
> -
> -&reg_dcdc1 {
> - regulator-always-on;
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-name = "vcc-3v0";
> -};
> -
> -&reg_dcdc2 {
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-gpu";
> -};
> -
> -&reg_dcdc3 {
> - regulator-always-on;
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-cpu";
> -};
> -
> -&reg_dcdc4 {
> - regulator-always-on;
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-sys-dll";
> -};
> -
> -&reg_dcdc5 {
> - regulator-always-on;
> - regulator-min-microvolt = <1500000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-name = "vcc-dram";
> -};
> -
> -&reg_dldo1 {
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc-wifi";
> -};
> -
>  &reg_dldo2 {
>          regulator-min-microvolt = <1800000>;
>          regulator-max-microvolt = <1800000>;
>          regulator-name = "vcc-pg";
>  };
>
> -&reg_drivevbus {
> - regulator-name = "usb0-vbus";
> - status = "okay";
> -};
> -
>  &simplefb_lcd {
> - vcc-lcd-supply = <&reg_dc1sw>;
>          vcc-pg-supply = <&reg_dldo2>;
>  };
> -
> -&usb_otg {
> - dr_mode = "otg";
> - status = "okay";
> -};
> -
> -&usb_power_supply {
> - status = "okay";
> -};
> -
> -&usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
> - usb0_vbus_power-supply = <&usb_power_supply>;
> - usb0_vbus-supply = <&reg_drivevbus>;
> - usb1_vbus-supply = <&reg_dldo1>;
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> similarity index 90%
> copy from arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> copy to arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> index 34d8710..0c43430 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> @@ -40,8 +40,6 @@
>   * OTHER DEALINGS IN THE SOFTWARE.
>   */
>
> -/dts-v1/;
> -#include "sun6i-a31s.dtsi"
>  #include "sunxi-common-regulators.dtsi"
>
>  #include <dt-bindings/gpio/gpio.h>
> @@ -49,9 +47,6 @@
>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>
>  / {
> - model = "Colorfly E708 Q1 tablet";
> - compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
> -
>          aliases {
>                  serial0 = &uart0;
>          };
> @@ -66,20 +61,8 @@
>  };
>
>  &ehci0 {
> - /* rtl8188etv wifi is connected here */
> - status = "okay";
> -};
> -
> -&lradc {
> - vref-supply = <&reg_aldo3>;
> + /* Wifi is connected here */
>          status = "okay";
> -
> - button@1000 {
> - label = "Home";
> - linux,code = <KEY_HOMEPAGE>;
> - channel = <0>;
> - voltage = <1000000>;
> - };
>  };
>
>  &mmc0 {
> @@ -181,12 +164,6 @@
>          regulator-name = "vcc-wifi";
>  };
>
> -&reg_dldo2 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcc-pg";
> -};
> -
>  &reg_drivevbus {
>          regulator-name = "usb0-vbus";
>          status = "okay";
> @@ -194,7 +171,6 @@
>
>  &simplefb_lcd {
>          vcc-lcd-supply = <&reg_dc1sw>;
> - vcc-pg-supply = <&reg_dldo2>;
>  };
>
>  &usb_otg {
> --
> 2.7.4
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

[Chen-Yu Tsai]

Hi,

On Fri, Aug 19, 2016 at 2:02 AM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
> Just like with a13/a23/a33 most a31 tablets are derived from the same
> reference design. Add a .dtsi file with all the common bits to avoid
> endless copy and pasting of these.
>
> The sun6i-reference-design-tablet.dtsi this commit adds is a copy
> of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
> removed / left in sun6i-a31s-colorfly-e708-q1.dts.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
>  arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts  | 147 +--------------------
>  ...8-q1.dts => sun6i-reference-design-tablet.dtsi} |  26 +---
>  2 files changed, 2 insertions(+), 171 deletions(-)
>  copy arch/arm/boot/dts/{sun6i-a31s-colorfly-e708-q1.dts => sun6i-reference-design-tablet.dtsi} (90%)
>
> diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> index 34d8710..882a4d8 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> @@ -42,32 +42,11 @@
>
>  /dts-v1/;
>  #include "sun6i-a31s.dtsi"
> -#include "sunxi-common-regulators.dtsi"
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/pinctrl/sun4i-a10.h>
> +#include "sun6i-reference-design-tablet.dtsi"
>
>  / {
>         model = "Colorfly E708 Q1 tablet";
>         compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
> -
> -       aliases {
> -               serial0 = &uart0;
> -       };
> -
> -       chosen {
> -               stdout-path = "serial0:115200n8";
> -       };
> -};
> -
> -&cpu0 {
> -       cpu-supply = <&reg_dcdc3>;
> -};
> -
> -&ehci0 {
> -       /* rtl8188etv wifi is connected here */
> -       status = "okay";
>  };
>
>  &lradc {
> @@ -82,136 +61,12 @@
>         };
>  };
>
> -&mmc0 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
> -       vmmc-supply = <&reg_dcdc1>;
> -       bus-width = <4>;
> -       cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
> -       cd-inverted;
> -       status = "okay";
> -};
> -
> -&pio {
> -       mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
> -               allwinner,pins = "PA8";
> -               allwinner,function = "gpio_in";
> -               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> -               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> -       };
> -
> -       usb0_id_detect_pin: usb0_id_detect_pin@0 {
> -               allwinner,pins = "PA15";
> -               allwinner,function = "gpio_in";
> -               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> -               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> -       };
> -};
> -
> -&p2wi {
> -       status = "okay";
> -
> -       axp22x: pmic@68 {
> -               compatible = "x-powers,axp221";
> -               reg = <0x68>;
> -               interrupt-parent = <&nmi_intc>;
> -               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> -               drivevbus-supply = <&reg_vcc5v0>;
> -               x-powers,drive-vbus-en;
> -       };
> -};
> -
> -#include "axp22x.dtsi"
> -
> -&reg_aldo3 {
> -       regulator-always-on;
> -       regulator-min-microvolt = <2700000>;
> -       regulator-max-microvolt = <3300000>;
> -       regulator-name = "avcc";
> -};
> -
> -&reg_dc1sw {
> -       regulator-name = "vcc-lcd";
> -};
> -
> -&reg_dc5ldo {
> -       regulator-always-on;
> -       regulator-min-microvolt = <700000>;
> -       regulator-max-microvolt = <1320000>;
> -       regulator-name = "vdd-cpus"; /* This is an educated guess */
> -};
> -
> -&reg_dcdc1 {
> -       regulator-always-on;
> -       regulator-min-microvolt = <3000000>;
> -       regulator-max-microvolt = <3000000>;
> -       regulator-name = "vcc-3v0";
> -};
> -
> -&reg_dcdc2 {
> -       regulator-min-microvolt = <700000>;
> -       regulator-max-microvolt = <1320000>;
> -       regulator-name = "vdd-gpu";
> -};
> -
> -&reg_dcdc3 {
> -       regulator-always-on;
> -       regulator-min-microvolt = <700000>;
> -       regulator-max-microvolt = <1320000>;
> -       regulator-name = "vdd-cpu";
> -};
> -
> -&reg_dcdc4 {
> -       regulator-always-on;
> -       regulator-min-microvolt = <700000>;
> -       regulator-max-microvolt = <1320000>;
> -       regulator-name = "vdd-sys-dll";
> -};
> -
> -&reg_dcdc5 {
> -       regulator-always-on;
> -       regulator-min-microvolt = <1500000>;
> -       regulator-max-microvolt = <1500000>;
> -       regulator-name = "vcc-dram";
> -};
> -
> -&reg_dldo1 {
> -       regulator-min-microvolt = <3300000>;
> -       regulator-max-microvolt = <3300000>;
> -       regulator-name = "vcc-wifi";
> -};
> -
>  &reg_dldo2 {
>         regulator-min-microvolt = <1800000>;
>         regulator-max-microvolt = <1800000>;
>         regulator-name = "vcc-pg";
>  };
>
> -&reg_drivevbus {
> -       regulator-name = "usb0-vbus";
> -       status = "okay";
> -};
> -
>  &simplefb_lcd {
> -       vcc-lcd-supply = <&reg_dc1sw>;
>         vcc-pg-supply = <&reg_dldo2>;
>  };
> -
> -&usb_otg {
> -       dr_mode = "otg";
> -       status = "okay";
> -};
> -
> -&usb_power_supply {
> -       status = "okay";
> -};
> -
> -&usbphy {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&usb0_id_detect_pin>;
> -       usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
> -       usb0_vbus_power-supply = <&usb_power_supply>;
> -       usb0_vbus-supply = <&reg_drivevbus>;
> -       usb1_vbus-supply = <&reg_dldo1>;
> -       status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> similarity index 90%
> copy from arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> copy to arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> index 34d8710..0c43430 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> @@ -40,8 +40,6 @@
>   *     OTHER DEALINGS IN THE SOFTWARE.
>   */
>
> -/dts-v1/;
> -#include "sun6i-a31s.dtsi"
>  #include "sunxi-common-regulators.dtsi"
>
>  #include <dt-bindings/gpio/gpio.h>
> @@ -49,9 +47,6 @@
>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>
>  / {
> -       model = "Colorfly E708 Q1 tablet";
> -       compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
> -
>         aliases {
>                 serial0 = &uart0;
>         };
> @@ -66,20 +61,8 @@
>  };
>
>  &ehci0 {
> -       /* rtl8188etv wifi is connected here */
> -       status = "okay";
> -};
> -
> -&lradc {

Shouldn't LRADC be standard for tablets?
Or are we looking at tablets with "soft" buttons?

Otherwise,

Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>


> -       vref-supply = <&reg_aldo3>;
> +       /* Wifi is connected here */
>         status = "okay";
> -
> -       button@1000 {
> -               label = "Home";
> -               linux,code = <KEY_HOMEPAGE>;
> -               channel = <0>;
> -               voltage = <1000000>;
> -       };
>  };
>
>  &mmc0 {
> @@ -181,12 +164,6 @@
>         regulator-name = "vcc-wifi";
>  };
>
> -&reg_dldo2 {
> -       regulator-min-microvolt = <1800000>;
> -       regulator-max-microvolt = <1800000>;
> -       regulator-name = "vcc-pg";
> -};
> -
>  &reg_drivevbus {
>         regulator-name = "usb0-vbus";
>         status = "okay";
> @@ -194,7 +171,6 @@
>
>  &simplefb_lcd {
>         vcc-lcd-supply = <&reg_dc1sw>;
> -       vcc-pg-supply = <&reg_dldo2>;
>  };
>
>  &usb_otg {
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

[Hans de Goede]

Hi,

On 22-08-16 10:50, Chen-Yu Tsai wrote:
> Hi,
>
> On Fri, Aug 19, 2016 at 2:02 AM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
>> Just like with a13/a23/a33 most a31 tablets are derived from the same
>> reference design. Add a .dtsi file with all the common bits to avoid
>> endless copy and pasting of these.
>>
>> The sun6i-reference-design-tablet.dtsi this commit adds is a copy
>> of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
>> removed / left in sun6i-a31s-colorfly-e708-q1.dts.
>>
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts  | 147 +--------------------
>>  ...8-q1.dts => sun6i-reference-design-tablet.dtsi} |  26 +---
>>  2 files changed, 2 insertions(+), 171 deletions(-)
>>  copy arch/arm/boot/dts/{sun6i-a31s-colorfly-e708-q1.dts => sun6i-reference-design-tablet.dtsi} (90%)
>>
>> diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>> index 34d8710..882a4d8 100644
>> --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>> +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>> @@ -42,32 +42,11 @@
>>
>>  /dts-v1/;
>>  #include "sun6i-a31s.dtsi"
>> -#include "sunxi-common-regulators.dtsi"
>> -
>> -#include <dt-bindings/gpio/gpio.h>
>> -#include <dt-bindings/input/input.h>
>> -#include <dt-bindings/pinctrl/sun4i-a10.h>
>> +#include "sun6i-reference-design-tablet.dtsi"
>>
>>  / {
>>         model = "Colorfly E708 Q1 tablet";
>>         compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
>> -
>> -       aliases {
>> -               serial0 = &uart0;
>> -       };
>> -
>> -       chosen {
>> -               stdout-path = "serial0:115200n8";
>> -       };
>> -};
>> -
>> -&cpu0 {
>> -       cpu-supply = <&reg_dcdc3>;
>> -};
>> -
>> -&ehci0 {
>> -       /* rtl8188etv wifi is connected here */
>> -       status = "okay";
>>  };
>>
>>  &lradc {
>> @@ -82,136 +61,12 @@
>>         };
>>  };
>>
>> -&mmc0 {
>> -       pinctrl-names = "default";
>> -       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
>> -       vmmc-supply = <&reg_dcdc1>;
>> -       bus-width = <4>;
>> -       cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
>> -       cd-inverted;
>> -       status = "okay";
>> -};
>> -
>> -&pio {
>> -       mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
>> -               allwinner,pins = "PA8";
>> -               allwinner,function = "gpio_in";
>> -               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> -               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>> -       };
>> -
>> -       usb0_id_detect_pin: usb0_id_detect_pin@0 {
>> -               allwinner,pins = "PA15";
>> -               allwinner,function = "gpio_in";
>> -               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> -               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>> -       };
>> -};
>> -
>> -&p2wi {
>> -       status = "okay";
>> -
>> -       axp22x: pmic@68 {
>> -               compatible = "x-powers,axp221";
>> -               reg = <0x68>;
>> -               interrupt-parent = <&nmi_intc>;
>> -               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> -               drivevbus-supply = <&reg_vcc5v0>;
>> -               x-powers,drive-vbus-en;
>> -       };
>> -};
>> -
>> -#include "axp22x.dtsi"
>> -
>> -&reg_aldo3 {
>> -       regulator-always-on;
>> -       regulator-min-microvolt = <2700000>;
>> -       regulator-max-microvolt = <3300000>;
>> -       regulator-name = "avcc";
>> -};
>> -
>> -&reg_dc1sw {
>> -       regulator-name = "vcc-lcd";
>> -};
>> -
>> -&reg_dc5ldo {
>> -       regulator-always-on;
>> -       regulator-min-microvolt = <700000>;
>> -       regulator-max-microvolt = <1320000>;
>> -       regulator-name = "vdd-cpus"; /* This is an educated guess */
>> -};
>> -
>> -&reg_dcdc1 {
>> -       regulator-always-on;
>> -       regulator-min-microvolt = <3000000>;
>> -       regulator-max-microvolt = <3000000>;
>> -       regulator-name = "vcc-3v0";
>> -};
>> -
>> -&reg_dcdc2 {
>> -       regulator-min-microvolt = <700000>;
>> -       regulator-max-microvolt = <1320000>;
>> -       regulator-name = "vdd-gpu";
>> -};
>> -
>> -&reg_dcdc3 {
>> -       regulator-always-on;
>> -       regulator-min-microvolt = <700000>;
>> -       regulator-max-microvolt = <1320000>;
>> -       regulator-name = "vdd-cpu";
>> -};
>> -
>> -&reg_dcdc4 {
>> -       regulator-always-on;
>> -       regulator-min-microvolt = <700000>;
>> -       regulator-max-microvolt = <1320000>;
>> -       regulator-name = "vdd-sys-dll";
>> -};
>> -
>> -&reg_dcdc5 {
>> -       regulator-always-on;
>> -       regulator-min-microvolt = <1500000>;
>> -       regulator-max-microvolt = <1500000>;
>> -       regulator-name = "vcc-dram";
>> -};
>> -
>> -&reg_dldo1 {
>> -       regulator-min-microvolt = <3300000>;
>> -       regulator-max-microvolt = <3300000>;
>> -       regulator-name = "vcc-wifi";
>> -};
>> -
>>  &reg_dldo2 {
>>         regulator-min-microvolt = <1800000>;
>>         regulator-max-microvolt = <1800000>;
>>         regulator-name = "vcc-pg";
>>  };
>>
>> -&reg_drivevbus {
>> -       regulator-name = "usb0-vbus";
>> -       status = "okay";
>> -};
>> -
>>  &simplefb_lcd {
>> -       vcc-lcd-supply = <&reg_dc1sw>;
>>         vcc-pg-supply = <&reg_dldo2>;
>>  };
>> -
>> -&usb_otg {
>> -       dr_mode = "otg";
>> -       status = "okay";
>> -};
>> -
>> -&usb_power_supply {
>> -       status = "okay";
>> -};
>> -
>> -&usbphy {
>> -       pinctrl-names = "default";
>> -       pinctrl-0 = <&usb0_id_detect_pin>;
>> -       usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
>> -       usb0_vbus_power-supply = <&usb_power_supply>;
>> -       usb0_vbus-supply = <&reg_drivevbus>;
>> -       usb1_vbus-supply = <&reg_dldo1>;
>> -       status = "okay";
>> -};
>> diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>> similarity index 90%
>> copy from arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>> copy to arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>> index 34d8710..0c43430 100644
>> --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>> +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>> @@ -40,8 +40,6 @@
>>   *     OTHER DEALINGS IN THE SOFTWARE.
>>   */
>>
>> -/dts-v1/;
>> -#include "sun6i-a31s.dtsi"
>>  #include "sunxi-common-regulators.dtsi"
>>
>>  #include <dt-bindings/gpio/gpio.h>
>> @@ -49,9 +47,6 @@
>>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>>
>>  / {
>> -       model = "Colorfly E708 Q1 tablet";
>> -       compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
>> -
>>         aliases {
>>                 serial0 = &uart0;
>>         };
>> @@ -66,20 +61,8 @@
>>  };
>>
>>  &ehci0 {
>> -       /* rtl8188etv wifi is connected here */
>> -       status = "okay";
>> -};
>> -
>> -&lradc {
>
> Shouldn't LRADC be standard for tablets?
> Or are we looking at tablets with "soft" buttons?

All A31 tablets I have do use the LRADC, but they do
not use standard button <-> voltage mappings as
A13 / A23 / A33 tablets do. Which buttons they
have varies quie a bit, and they tend to not use
the same voltages for e.g. volume-up / volume-down
across tablets AFAICT.

Regards,

Hans

>
> Otherwise,
>
> Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
>
>
>> -       vref-supply = <&reg_aldo3>;
>> +       /* Wifi is connected here */
>>         status = "okay";
>> -
>> -       button@1000 {
>> -               label = "Home";
>> -               linux,code = <KEY_HOMEPAGE>;
>> -               channel = <0>;
>> -               voltage = <1000000>;
>> -       };
>>  };
>>
>>  &mmc0 {
>> @@ -181,12 +164,6 @@
>>         regulator-name = "vcc-wifi";
>>  };
>>
>> -&reg_dldo2 {
>> -       regulator-min-microvolt = <1800000>;
>> -       regulator-max-microvolt = <1800000>;
>> -       regulator-name = "vcc-pg";
>> -};
>> -
>>  &reg_drivevbus {
>>         regulator-name = "usb0-vbus";
>>         status = "okay";
>> @@ -194,7 +171,6 @@
>>
>>  &simplefb_lcd {
>>         vcc-lcd-supply = <&reg_dc1sw>;
>> -       vcc-pg-supply = <&reg_dldo2>;
>>  };
>>
>>  &usb_otg {
>> --
>> 2.7.4
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

[Icenowy Zheng]

22.08.2016, 17:01, "Hans de Goede" <hdegoede@redhat.com>:
> Hi,
>
> On 22-08-16 10:50, Chen-Yu Tsai wrote:
>>  Hi,
>>
>>  On Fri, Aug 19, 2016 at 2:02 AM, Hans de Goede <hdegoede@redhat.com> wrote:
>>>  Just like with a13/a23/a33 most a31 tablets are derived from the same
>>>  reference design. Add a .dtsi file with all the common bits to avoid
>>>  endless copy and pasting of these.
>>>
>>>  The sun6i-reference-design-tablet.dtsi this commit adds is a copy
>>>  of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
>>>  removed / left in sun6i-a31s-colorfly-e708-q1.dts.
>>>
>>>  Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>  ---
>>>   arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts | 147 +--------------------
>>>   ...8-q1.dts => sun6i-reference-design-tablet.dtsi} | 26 +---
>>>   2 files changed, 2 insertions(+), 171 deletions(-)
>>>   copy arch/arm/boot/dts/{sun6i-a31s-colorfly-e708-q1.dts => sun6i-reference-design-tablet.dtsi} (90%)
>>>
>>>  diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>  index 34d8710..882a4d8 100644
>>>  --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>  +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>  @@ -42,32 +42,11 @@
>>>
>>>   /dts-v1/;
>>>   #include "sun6i-a31s.dtsi"
>>>  -#include "sunxi-common-regulators.dtsi"
>>>  -
>>>  -#include <dt-bindings/gpio/gpio.h>
>>>  -#include <dt-bindings/input/input.h>
>>>  -#include <dt-bindings/pinctrl/sun4i-a10.h>
>>>  +#include "sun6i-reference-design-tablet.dtsi"
>>>
>>>   / {
>>>          model = "Colorfly E708 Q1 tablet";
>>>          compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
>>>  -
>>>  - aliases {
>>>  - serial0 = &uart0;
>>>  - };
>>>  -
>>>  - chosen {
>>>  - stdout-path = "serial0:115200n8";
>>>  - };
>>>  -};
>>>  -
>>>  -&cpu0 {
>>>  - cpu-supply = <&reg_dcdc3>;
>>>  -};
>>>  -
>>>  -&ehci0 {
>>>  - /* rtl8188etv wifi is connected here */
>>>  - status = "okay";
>>>   };
>>>
>>>   &lradc {
>>>  @@ -82,136 +61,12 @@
>>>          };
>>>   };
>>>
>>>  -&mmc0 {
>>>  - pinctrl-names = "default";
>>>  - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
>>>  - vmmc-supply = <&reg_dcdc1>;
>>>  - bus-width = <4>;
>>>  - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
>>>  - cd-inverted;
>>>  - status = "okay";
>>>  -};
>>>  -
>>>  -&pio {
>>>  - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
>>>  - allwinner,pins = "PA8";
>>>  - allwinner,function = "gpio_in";
>>>  - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>>>  - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>>>  - };
>>>  -
>>>  - usb0_id_detect_pin: usb0_id_detect_pin@0 {
>>>  - allwinner,pins = "PA15";
>>>  - allwinner,function = "gpio_in";
>>>  - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>>>  - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>>>  - };
>>>  -};
>>>  -
>>>  -&p2wi {
>>>  - status = "okay";
>>>  -
>>>  - axp22x: pmic@68 {
>>>  - compatible = "x-powers,axp221";
>>>  - reg = <0x68>;
>>>  - interrupt-parent = <&nmi_intc>;
>>>  - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>>>  - drivevbus-supply = <&reg_vcc5v0>;
>>>  - x-powers,drive-vbus-en;
>>>  - };
>>>  -};
>>>  -
>>>  -#include "axp22x.dtsi"
>>>  -
>>>  -&reg_aldo3 {
>>>  - regulator-always-on;
>>>  - regulator-min-microvolt = <2700000>;
>>>  - regulator-max-microvolt = <3300000>;
>>>  - regulator-name = "avcc";
>>>  -};
>>>  -
>>>  -&reg_dc1sw {
>>>  - regulator-name = "vcc-lcd";
>>>  -};
>>>  -
>>>  -&reg_dc5ldo {
>>>  - regulator-always-on;
>>>  - regulator-min-microvolt = <700000>;
>>>  - regulator-max-microvolt = <1320000>;
>>>  - regulator-name = "vdd-cpus"; /* This is an educated guess */
>>>  -};
>>>  -
>>>  -&reg_dcdc1 {
>>>  - regulator-always-on;
>>>  - regulator-min-microvolt = <3000000>;
>>>  - regulator-max-microvolt = <3000000>;
>>>  - regulator-name = "vcc-3v0";
>>>  -};
>>>  -
>>>  -&reg_dcdc2 {
>>>  - regulator-min-microvolt = <700000>;
>>>  - regulator-max-microvolt = <1320000>;
>>>  - regulator-name = "vdd-gpu";
>>>  -};
>>>  -
>>>  -&reg_dcdc3 {
>>>  - regulator-always-on;
>>>  - regulator-min-microvolt = <700000>;
>>>  - regulator-max-microvolt = <1320000>;
>>>  - regulator-name = "vdd-cpu";
>>>  -};
>>>  -
>>>  -&reg_dcdc4 {
>>>  - regulator-always-on;
>>>  - regulator-min-microvolt = <700000>;
>>>  - regulator-max-microvolt = <1320000>;
>>>  - regulator-name = "vdd-sys-dll";
>>>  -};
>>>  -
>>>  -&reg_dcdc5 {
>>>  - regulator-always-on;
>>>  - regulator-min-microvolt = <1500000>;
>>>  - regulator-max-microvolt = <1500000>;
>>>  - regulator-name = "vcc-dram";
>>>  -};
>>>  -
>>>  -&reg_dldo1 {
>>>  - regulator-min-microvolt = <3300000>;
>>>  - regulator-max-microvolt = <3300000>;
>>>  - regulator-name = "vcc-wifi";
>>>  -};
>>>  -
>>>   &reg_dldo2 {
>>>          regulator-min-microvolt = <1800000>;
>>>          regulator-max-microvolt = <1800000>;
>>>          regulator-name = "vcc-pg";
>>>   };
>>>
>>>  -&reg_drivevbus {
>>>  - regulator-name = "usb0-vbus";
>>>  - status = "okay";
>>>  -};
>>>  -
>>>   &simplefb_lcd {
>>>  - vcc-lcd-supply = <&reg_dc1sw>;
>>>          vcc-pg-supply = <&reg_dldo2>;
>>>   };
>>>  -
>>>  -&usb_otg {
>>>  - dr_mode = "otg";
>>>  - status = "okay";
>>>  -};
>>>  -
>>>  -&usb_power_supply {
>>>  - status = "okay";
>>>  -};
>>>  -
>>>  -&usbphy {
>>>  - pinctrl-names = "default";
>>>  - pinctrl-0 = <&usb0_id_detect_pin>;
>>>  - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
>>>  - usb0_vbus_power-supply = <&usb_power_supply>;
>>>  - usb0_vbus-supply = <&reg_drivevbus>;
>>>  - usb1_vbus-supply = <&reg_dldo1>;
>>>  - status = "okay";
>>>  -};
>>>  diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>>>  similarity index 90%
>>>  copy from arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>  copy to arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>>>  index 34d8710..0c43430 100644
>>>  --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>  +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>>>  @@ -40,8 +40,6 @@
>>>    * OTHER DEALINGS IN THE SOFTWARE.
>>>    */
>>>
>>>  -/dts-v1/;
>>>  -#include "sun6i-a31s.dtsi"
>>>   #include "sunxi-common-regulators.dtsi"
>>>
>>>   #include <dt-bindings/gpio/gpio.h>
>>>  @@ -49,9 +47,6 @@
>>>   #include <dt-bindings/pinctrl/sun4i-a10.h>
>>>
>>>   / {
>>>  - model = "Colorfly E708 Q1 tablet";
>>>  - compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
>>>  -
>>>          aliases {
>>>                  serial0 = &uart0;
>>>          };
>>>  @@ -66,20 +61,8 @@
>>>   };
>>>
>>>   &ehci0 {
>>>  - /* rtl8188etv wifi is connected here */
>>>  - status = "okay";
>>>  -};
>>>  -
>>>  -&lradc {
>>
>>  Shouldn't LRADC be standard for tablets?
>>  Or are we looking at tablets with "soft" buttons?
>
> All A31 tablets I have do use the LRADC, but they do
> not use standard button <-> voltage mappings as
> A13 / A23 / A33 tablets do. Which buttons they
> have varies quie a bit, and they tend to not use
> the same voltages for e.g. volume-up / volume-down
> across tablets AFAICT.

Yes... I also found it...
And how to check the right values?
I cannot find them for my friend's Viewsonic ViewPad 133Q.

>
> Regards,
>
> Hans
>
>>  Otherwise,
>>
>>  Acked-by: Chen-Yu Tsai <wens@csie.org>
>>
>>>  - vref-supply = <&reg_aldo3>;
>>>  + /* Wifi is connected here */
>>>          status = "okay";
>>>  -
>>>  - button@1000 {
>>>  - label = "Home";
>>>  - linux,code = <KEY_HOMEPAGE>;
>>>  - channel = <0>;
>>>  - voltage = <1000000>;
>>>  - };
>>>   };
>>>
>>>   &mmc0 {
>>>  @@ -181,12 +164,6 @@
>>>          regulator-name = "vcc-wifi";
>>>   };
>>>
>>>  -&reg_dldo2 {
>>>  - regulator-min-microvolt = <1800000>;
>>>  - regulator-max-microvolt = <1800000>;
>>>  - regulator-name = "vcc-pg";
>>>  -};
>>>  -
>>>   &reg_drivevbus {
>>>          regulator-name = "usb0-vbus";
>>>          status = "okay";
>>>  @@ -194,7 +171,6 @@
>>>
>>>   &simplefb_lcd {
>>>          vcc-lcd-supply = <&reg_dc1sw>;
>>>  - vcc-pg-supply = <&reg_dldo2>;
>>>   };
>>>
>>>   &usb_otg {
>>>  --
>>>  2.7.4
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

[Hans de Goede]

HI,

On 22-08-16 14:07, Icenowy Zheng wrote:
>
>
> 22.08.2016, 17:01, "Hans de Goede" <hdegoede@redhat.com>:
>> Hi,
>>
>> On 22-08-16 10:50, Chen-Yu Tsai wrote:
>>>  Hi,
>>>
>>>  On Fri, Aug 19, 2016 at 2:02 AM, Hans de Goede <hdegoede@redhat.com> wrote:
>>>>  Just like with a13/a23/a33 most a31 tablets are derived from the same
>>>>  reference design. Add a .dtsi file with all the common bits to avoid
>>>>  endless copy and pasting of these.
>>>>
>>>>  The sun6i-reference-design-tablet.dtsi this commit adds is a copy
>>>>  of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
>>>>  removed / left in sun6i-a31s-colorfly-e708-q1.dts.
>>>>
>>>>  Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>>  ---
>>>>   arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts | 147 +--------------------
>>>>   ...8-q1.dts => sun6i-reference-design-tablet.dtsi} | 26 +---
>>>>   2 files changed, 2 insertions(+), 171 deletions(-)
>>>>   copy arch/arm/boot/dts/{sun6i-a31s-colorfly-e708-q1.dts => sun6i-reference-design-tablet.dtsi} (90%)
>>>>
>>>>  diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>>  index 34d8710..882a4d8 100644
>>>>  --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>>  +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>>  @@ -42,32 +42,11 @@
>>>>
>>>>   /dts-v1/;
>>>>   #include "sun6i-a31s.dtsi"
>>>>  -#include "sunxi-common-regulators.dtsi"
>>>>  -
>>>>  -#include <dt-bindings/gpio/gpio.h>
>>>>  -#include <dt-bindings/input/input.h>
>>>>  -#include <dt-bindings/pinctrl/sun4i-a10.h>
>>>>  +#include "sun6i-reference-design-tablet.dtsi"
>>>>
>>>>   / {
>>>>          model = "Colorfly E708 Q1 tablet";
>>>>          compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
>>>>  -
>>>>  - aliases {
>>>>  - serial0 = &uart0;
>>>>  - };
>>>>  -
>>>>  - chosen {
>>>>  - stdout-path = "serial0:115200n8";
>>>>  - };
>>>>  -};
>>>>  -
>>>>  -&cpu0 {
>>>>  - cpu-supply = <&reg_dcdc3>;
>>>>  -};
>>>>  -
>>>>  -&ehci0 {
>>>>  - /* rtl8188etv wifi is connected here */
>>>>  - status = "okay";
>>>>   };
>>>>
>>>>   &lradc {
>>>>  @@ -82,136 +61,12 @@
>>>>          };
>>>>   };
>>>>
>>>>  -&mmc0 {
>>>>  - pinctrl-names = "default";
>>>>  - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
>>>>  - vmmc-supply = <&reg_dcdc1>;
>>>>  - bus-width = <4>;
>>>>  - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
>>>>  - cd-inverted;
>>>>  - status = "okay";
>>>>  -};
>>>>  -
>>>>  -&pio {
>>>>  - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
>>>>  - allwinner,pins = "PA8";
>>>>  - allwinner,function = "gpio_in";
>>>>  - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>>>>  - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>>>>  - };
>>>>  -
>>>>  - usb0_id_detect_pin: usb0_id_detect_pin@0 {
>>>>  - allwinner,pins = "PA15";
>>>>  - allwinner,function = "gpio_in";
>>>>  - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>>>>  - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>>>>  - };
>>>>  -};
>>>>  -
>>>>  -&p2wi {
>>>>  - status = "okay";
>>>>  -
>>>>  - axp22x: pmic@68 {
>>>>  - compatible = "x-powers,axp221";
>>>>  - reg = <0x68>;
>>>>  - interrupt-parent = <&nmi_intc>;
>>>>  - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>>>>  - drivevbus-supply = <&reg_vcc5v0>;
>>>>  - x-powers,drive-vbus-en;
>>>>  - };
>>>>  -};
>>>>  -
>>>>  -#include "axp22x.dtsi"
>>>>  -
>>>>  -&reg_aldo3 {
>>>>  - regulator-always-on;
>>>>  - regulator-min-microvolt = <2700000>;
>>>>  - regulator-max-microvolt = <3300000>;
>>>>  - regulator-name = "avcc";
>>>>  -};
>>>>  -
>>>>  -&reg_dc1sw {
>>>>  - regulator-name = "vcc-lcd";
>>>>  -};
>>>>  -
>>>>  -&reg_dc5ldo {
>>>>  - regulator-always-on;
>>>>  - regulator-min-microvolt = <700000>;
>>>>  - regulator-max-microvolt = <1320000>;
>>>>  - regulator-name = "vdd-cpus"; /* This is an educated guess */
>>>>  -};
>>>>  -
>>>>  -&reg_dcdc1 {
>>>>  - regulator-always-on;
>>>>  - regulator-min-microvolt = <3000000>;
>>>>  - regulator-max-microvolt = <3000000>;
>>>>  - regulator-name = "vcc-3v0";
>>>>  -};
>>>>  -
>>>>  -&reg_dcdc2 {
>>>>  - regulator-min-microvolt = <700000>;
>>>>  - regulator-max-microvolt = <1320000>;
>>>>  - regulator-name = "vdd-gpu";
>>>>  -};
>>>>  -
>>>>  -&reg_dcdc3 {
>>>>  - regulator-always-on;
>>>>  - regulator-min-microvolt = <700000>;
>>>>  - regulator-max-microvolt = <1320000>;
>>>>  - regulator-name = "vdd-cpu";
>>>>  -};
>>>>  -
>>>>  -&reg_dcdc4 {
>>>>  - regulator-always-on;
>>>>  - regulator-min-microvolt = <700000>;
>>>>  - regulator-max-microvolt = <1320000>;
>>>>  - regulator-name = "vdd-sys-dll";
>>>>  -};
>>>>  -
>>>>  -&reg_dcdc5 {
>>>>  - regulator-always-on;
>>>>  - regulator-min-microvolt = <1500000>;
>>>>  - regulator-max-microvolt = <1500000>;
>>>>  - regulator-name = "vcc-dram";
>>>>  -};
>>>>  -
>>>>  -&reg_dldo1 {
>>>>  - regulator-min-microvolt = <3300000>;
>>>>  - regulator-max-microvolt = <3300000>;
>>>>  - regulator-name = "vcc-wifi";
>>>>  -};
>>>>  -
>>>>   &reg_dldo2 {
>>>>          regulator-min-microvolt = <1800000>;
>>>>          regulator-max-microvolt = <1800000>;
>>>>          regulator-name = "vcc-pg";
>>>>   };
>>>>
>>>>  -&reg_drivevbus {
>>>>  - regulator-name = "usb0-vbus";
>>>>  - status = "okay";
>>>>  -};
>>>>  -
>>>>   &simplefb_lcd {
>>>>  - vcc-lcd-supply = <&reg_dc1sw>;
>>>>          vcc-pg-supply = <&reg_dldo2>;
>>>>   };
>>>>  -
>>>>  -&usb_otg {
>>>>  - dr_mode = "otg";
>>>>  - status = "okay";
>>>>  -};
>>>>  -
>>>>  -&usb_power_supply {
>>>>  - status = "okay";
>>>>  -};
>>>>  -
>>>>  -&usbphy {
>>>>  - pinctrl-names = "default";
>>>>  - pinctrl-0 = <&usb0_id_detect_pin>;
>>>>  - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
>>>>  - usb0_vbus_power-supply = <&usb_power_supply>;
>>>>  - usb0_vbus-supply = <&reg_drivevbus>;
>>>>  - usb1_vbus-supply = <&reg_dldo1>;
>>>>  - status = "okay";
>>>>  -};
>>>>  diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>>>>  similarity index 90%
>>>>  copy from arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>>  copy to arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>>>>  index 34d8710..0c43430 100644
>>>>  --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
>>>>  +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
>>>>  @@ -40,8 +40,6 @@
>>>>    * OTHER DEALINGS IN THE SOFTWARE.
>>>>    */
>>>>
>>>>  -/dts-v1/;
>>>>  -#include "sun6i-a31s.dtsi"
>>>>   #include "sunxi-common-regulators.dtsi"
>>>>
>>>>   #include <dt-bindings/gpio/gpio.h>
>>>>  @@ -49,9 +47,6 @@
>>>>   #include <dt-bindings/pinctrl/sun4i-a10.h>
>>>>
>>>>   / {
>>>>  - model = "Colorfly E708 Q1 tablet";
>>>>  - compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
>>>>  -
>>>>          aliases {
>>>>                  serial0 = &uart0;
>>>>          };
>>>>  @@ -66,20 +61,8 @@
>>>>   };
>>>>
>>>>   &ehci0 {
>>>>  - /* rtl8188etv wifi is connected here */
>>>>  - status = "okay";
>>>>  -};
>>>>  -
>>>>  -&lradc {
>>>
>>>  Shouldn't LRADC be standard for tablets?
>>>  Or are we looking at tablets with "soft" buttons?
>>
>> All A31 tablets I have do use the LRADC, but they do
>> not use standard button <-> voltage mappings as
>> A13 / A23 / A33 tablets do. Which buttons they
>> have varies quie a bit, and they tend to not use
>> the same voltages for e.g. volume-up / volume-down
>> across tablets AFAICT.
>
> Yes... I also found it...
> And how to check the right values?
> I cannot find them for my friend's Viewsonic ViewPad 133Q.

I usually build the driver with a debug printk added like
this:

--- a/drivers/input/keyboard/sun4i-lradc-keys.c
+++ b/drivers/input/keyboard/sun4i-lradc-keys.c
@@ -99,6 +99,7 @@ static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id)
         if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) {
                 val = readl(lradc->base + LRADC_DATA0) & 0x3f;
                 voltage = val * lradc->vref / 63;
+         pr_err("sun4i-lradc voltage %d\n", voltage);

                 for (i = 0; i < lradc->chan0_map_count; i++) {
                         diff = abs(lradc->chan0_map[i].voltage - voltage);

When I need to figure out the values.

I hope that helps.

Regards,

Hans




>
>>
>> Regards,
>>
>> Hans
>>
>>>  Otherwise,
>>>
>>>  Acked-by: Chen-Yu Tsai <wens@csie.org>
>>>
>>>>  - vref-supply = <&reg_aldo3>;
>>>>  + /* Wifi is connected here */
>>>>          status = "okay";
>>>>  -
>>>>  - button@1000 {
>>>>  - label = "Home";
>>>>  - linux,code = <KEY_HOMEPAGE>;
>>>>  - channel = <0>;
>>>>  - voltage = <1000000>;
>>>>  - };
>>>>   };
>>>>
>>>>   &mmc0 {
>>>>  @@ -181,12 +164,6 @@
>>>>          regulator-name = "vcc-wifi";
>>>>   };
>>>>
>>>>  -&reg_dldo2 {
>>>>  - regulator-min-microvolt = <1800000>;
>>>>  - regulator-max-microvolt = <1800000>;
>>>>  - regulator-name = "vcc-pg";
>>>>  -};
>>>>  -
>>>>   &reg_drivevbus {
>>>>          regulator-name = "usb0-vbus";
>>>>          status = "okay";
>>>>  @@ -194,7 +171,6 @@
>>>>
>>>>   &simplefb_lcd {
>>>>          vcc-lcd-supply = <&reg_dc1sw>;
>>>>  - vcc-pg-supply = <&reg_dldo2>;
>>>>   };
>>>>
>>>>   &usb_otg {
>>>>  --
>>>>  2.7.4
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/3] ARM: dts: sun6i: Add new dts file for tablets using the inet-q972 PCB

[Hans de Goede]

Add a dts file for tablets using the generic inet-q972 PCB.

Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host,
micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot,
(mini) power-barrel and an usb wifi module.

This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/Makefile                 |   1 +
 arch/arm/boot/dts/sun6i-a31s-inet-q972.dts | 100 +++++++++++++++++++++++++++++
 2 files changed, 101 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun6i-a31s-inet-q972.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 498ebfd..5d984c9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -743,6 +743,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-mele-a1000g-quad.dtb \
 	sun6i-a31s-colorfly-e708-q1.dtb \
 	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
 	sun6i-a31s-primo81.dtb \
 	sun6i-a31s-sina31s.dtb \
 	sun6i-a31s-sinovoip-bpi-m2.dtb \
diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
new file mode 100644
index 0000000..e584e6b
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "iNet Q972 tablet";
+	compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@900 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <900000>;
+	};
+
+	button@1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
-- 
2.7.4

Re: [PATCH v2 3/3] ARM: dts: sun6i: Add new dts file for tablets using the inet-q972 PCB

[Chen-Yu Tsai]

On Fri, Aug 19, 2016 at 2:02 AM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
> Add a dts file for tablets using the generic inet-q972 PCB.
>
> Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host,
> micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot,
> (mini) power-barrel and an usb wifi module.
>
> This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 0/3] ARM: dts: sun6i: tablet dts changes

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 680 bytes --]

On Thu, Aug 18, 2016 at 08:02:14PM +0200, Hans de Goede wrote:
> Hi Maxime and Chen-Yu,
> 
> Here is a v2 of the series I sent earlier today, changes:
> 
> -Add a 3th patch (patch 1/3) which I forgot in v1, the other
>  2 patches actually depend on this one to apply without conflicts
> -Name the added dtsi file sun6i-reference-design-tablet.dtsi instead
>  of sun6i-a31-reference-design-tablet.dtsi, to be consistent with
>  what we've done for sun5i / sun8i (and because it is valid for
>  both A31 and A31s based tablets).

Applied all three, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]