From mboxrd@z Thu Jan 1 00:00:00 1970 From: Priit Laes Subject: Re: [PATCH 0/9] mfd: axp20x: Add support for AXP809 PMIC Date: Sun, 21 Aug 2016 09:51:25 +0300 Message-ID: <1471762285.581.1.camel@plaes.org> References: <20160821021125.1521-1-wens@csie.org> Reply-To: plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: <20160821021125.1521-1-wens-jdAy2FN1RRM@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: wens-jdAy2FN1RRM@public.gmane.org, Lee Jones , Rob Herring , Mark Rutland , Liam Girdwood , Mark Brown , Maxime Ripard Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org On Sun, 2016-08-21 at 10:11 +0800, Chen-Yu Tsai wrote: > Hi everyone, >=20 > This series adds support for X-Powers' AXP806 PMIC. This is the > secondary > PMIC accompanying Allwinner's A80 SoC. For now, only the regulators > are > supported. While the AXP806 supports standalone operation, no > hardware > exists, so this will not be supported. Title says AXP809, but in text and in subsequent patches there's also 806/809 confusion. >=20 > Patch 1 adds AXP806 to the axp20x bindings. >=20 > Patch 2 adds AXP806 support to the axp20x mfd driver. >=20 > Patch 3 fixes regulator output adjustment during regulator > registration > so it doesn't fail if the higher or lower bounds of its voltage > constraints > don't match up with the regulator's voltage granularity. >=20 > Patch 4 adds AXP806 support to the axp20x regulator driver. >=20 > Patch 5 adds the unused SW switch output of the AXP809 PMIC on the > A80 > Optimus board. This was accidentally left out of the AXP809 series. >=20 > Patch 6 adds the unused SW switch output of the AXP809 PMIC on the > Cubieboard 4. This was accidentally left out of the AXP809 series. >=20 > Patch 7 enables AXP809 support on the A80 Optimus board. >=20 > Patch 8 enables AXP809 support on the Cubieboard 4. >=20 > Patch 9 disables EHCI1 on the A80 Optimus board. >=20 >=20 > Regards > ChenYu >=20 > Chen-Yu Tsai (9): > =C2=A0 mfd: axp20x: Add bindings for AXP806 PMIC > =C2=A0 mfd: axp20x: Add support for AXP806 PMIC > =C2=A0 regulator: core: Try full range when adjusting regulators to > =C2=A0=C2=A0=C2=A0=C2=A0constraints > =C2=A0 regulator: axp20x: support AXP806 variant > =C2=A0 ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unuse= d > =C2=A0 ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unuse= d > =C2=A0 ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and > =C2=A0=C2=A0=C2=A0=C2=A0regulators > =C2=A0 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and > =C2=A0=C2=A0=C2=A0=C2=A0regulators > =C2=A0 ARM: dts: sun9i: a80-optimus: Disable EHCI1 >=20 > =C2=A0Documentation/devicetree/bindings/mfd/axp20x.txt |=C2=A0=C2=A028 ++= +++- > =C2=A0arch/arm/boot/dts/sun9i-a80-cubieboard4.dts=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0| 116 > +++++++++++++++++++++ > =C2=A0arch/arm/boot/dts/sun9i-a80-optimus.dts=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0| 123 > ++++++++++++++++++++++- > =C2=A0drivers/mfd/axp20x-rsb.c=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0|=C2=A0=C2=A0=C2=A01 + > =C2=A0drivers/mfd/axp20x.c=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0|=C2=A0=C2=A072 +++++= ++++++++ > =C2=A0drivers/regulator/axp20x-regulator.c=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0| 117 > +++++++++++++++++++-- > =C2=A0drivers/regulator/core.c=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0|=C2=A0=C2=A0=C2=A08 +- > =C2=A0include/linux/mfd/axp20x.h=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0|=C2=A0=C2=A060 +++++++++++ > =C2=A08 files changed, 508 insertions(+), 17 deletions(-) >=20 > --=C2=A0 > 2.9.3 >=20 --=20 You received this message because you are subscribed to the Google Groups "= linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an e= mail to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout.