[PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode

[Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>]

In case dr_mode isn't passed via DT, the dwc2 driver defaults
to OTG mode. But the Raspberry Pi 3 is designed only for host mode.
So fix this issue by linking to the dtsi file which set the dr_mode
to host.

Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
---
 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts   |    1 +
 .../boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi    |    1 +
 2 files changed, 2 insertions(+)
 create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi

diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 7841b72..7625e57 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -2,6 +2,7 @@
 #include "bcm2837.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
new file mode 120000
index 0000000..cbeebe3
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi
\ No newline at end of file
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html