From: Mike Looijmans <mike.looijmans@topic.nl>
To: devicetree@vger.kernel.org
Cc: robh@kernel.org, linux@roeck-us.net, linux-hwmon@vger.kernel.org,
linux-kernel@vger.kernel.org,
Mike Looijmans <mike.looijmans@topic.nl>
Subject: [PATCH] hwmon: (max6650.c) Add devicetree support documentation
Date: Mon, 22 Aug 2016 08:44:32 +0200 [thread overview]
Message-ID: <1471848272-3032-1-git-send-email-mike.looijmans@topic.nl> (raw)
This adds the devicetree binding documentation for the max6650 fan
controller.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
v2: Allow only 12V or 5V supply voltage
.../devicetree/bindings/hwmon/max6650.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/max6650.txt
diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
new file mode 100644
index 0000000..d6c10e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/max6650.txt
@@ -0,0 +1,23 @@
+Bindings for MAX6651 and MAX6650 I2C fan controllers
+
+Reference:
+[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+Required properties:
+- compatible : One of "maxim,max6650" or "maxim,max6651"
+- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
+
+Optional properties, default is to retain the chip's current setting:
+- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
+ 12000000 uV.
+- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values
+ allow more fine-grained control of slower fans.
+ Valid: 1, 2, 4, 8, 16.
+
+Example:
+ fan-max6650: max6650@1b {
+ reg = <0x1b>;
+ compatible = "maxim,max6650";
+ maxim,fan-microvolt = <12000000>;
+ maxim,fan-prescale = <4>;
+ };
--
1.9.1
next reply other threads:[~2016-08-22 6:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-22 6:44 Mike Looijmans [this message]
2016-08-23 18:05 ` [PATCH] hwmon: (max6650.c) Add devicetree support documentation Rob Herring
[not found] ` <1471848272-3032-1-git-send-email-mike.looijmans-Oq418RWZeHk@public.gmane.org>
2016-09-09 4:18 ` Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2016-08-16 7:23 Mike Looijmans
2016-08-18 19:11 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471848272-3032-1-git-send-email-mike.looijmans@topic.nl \
--to=mike.looijmans@topic.nl \
--cc=devicetree@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).