From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Stultz Subject: [PATCH 3/4] arm64: dts: hikey: Add hikey support for syscon-reboot-mode Date: Mon, 22 Aug 2016 15:48:04 -0700 Message-ID: <1471906085-16682-3-git-send-email-john.stultz@linaro.org> References: <1471906085-16682-1-git-send-email-john.stultz@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1471906085-16682-1-git-send-email-john.stultz@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: lkml Cc: Mark Rutland , devicetree@vger.kernel.org, Guodong Xu , Catalin Marinas , Will Deacon , Wei Xu , Bjorn Andersson , Rob Herring , John Stultz , Haojian Zhuang , Andy Yan , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Add support to hikey dts for the syscon-reboot-mode driver. After trying an approach using a sram driver and node, a number of issues cropped up which would make it so we would be duplicating a lot of extra syscon infrastructure in order to support mfds on sram. After talking with Bjorn, using the syscon driver for this seems like an better choice. Cc: Andy Yan Cc: Bjorn Andersson Cc: Haojian Zhuang Cc: Guodong Xu Cc: Wei Xu Cc: Rob Herring Cc: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Acked-by: Bjorn Andersson Signed-off-by: John Stultz --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 8597e9b..4492a15 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -29,6 +29,7 @@ * Reserve below regions from memory node: * * 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using + * 0x05f0,1000 - 0x05f0,1fff: Reboot reason * 0x06df,f000 - 0x06df,ffff: Mailbox message data * 0x0740,f000 - 0x0740,ffff: MCU firmware section * 0x3e00,0000 - 0x3fff,ffff: OP-TEE @@ -36,11 +37,26 @@ memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x05e00000>, - <0x00000000 0x05f00000 0x00000000 0x00eff000>, + <0x00000000 0x05f00000 0x00000000 0x00001000>, + <0x00000000 0x05f02000 0x00000000 0x00efd000>, <0x00000000 0x06e00000 0x00000000 0x0060f000>, <0x00000000 0x07410000 0x00000000 0x36bf0000>; }; + reboot-mode-syscon@5f01000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x05f01000 0x0 0x00001000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x0>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; + soc { spi0: spi@f7106000 { status = "ok"; -- 1.9.1