From: Wenyou Yang <wenyou.yang@atmel.com>
To: Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Lee Jones <lee.jones@linaro.org>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: linux-kernel@vger.kernel.org,
Wenyou Yang <wenyou.yang@microchip.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-pm@vger.kernel.org, Wenyou Yang <wenyou.yang@atmel.com>
Subject: [PATCH v9 1/4] power: act8945a_charger: Add capacity level property
Date: Thu, 1 Sep 2016 17:29:58 +0800 [thread overview]
Message-ID: <1472722201-31872-2-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1472722201-31872-1-git-send-email-wenyou.yang@atmel.com>
Add the power supply capacity level property, it corresponds to
POWER_SUPPLY_CAPACITY_LEVEL_*.
It also utilizes the precision voltage detector function module
to catch the low battery voltage.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
Changes in v9:
- For "lbo-gpios", use devm_gpiod_get_optional(), instead of
devm_gpiod_get(), for simpler and more reasonable.
- Remove unnecessary GPIOLIB dependency.
Changes in v8:
- As the act8945a_charger is regarded as a sub-device, all
properties can be achieved from its own device node,
use devm_gpiod_get() properly as well to get "lbo-gpios".
- Add missing return -EPROBE_DEFER for "lbo-gpios".
Changes in v7:
- For "lbo-gpios", use gpiod_get() to fix devm_gpiod_get() wrong use
with parent device as *dev argument.
- Add the handle -EPROBE_DEFER returned from gpiod_get "lbo-gpios".
- Use dev_info() to print log if the lbo irq request failed.
- Remove unneeded semicolon.
- Add depends on GPIOLIB for use gpiod.
Changes in v6:
- For "lbo-gpios", use gpiod API instead of old gpio API to handle.
Changes in v4:
- Change devname of devm_request_irq() from "lbo-detect" to
"act8945a, lbo-detect".
drivers/power/supply/act8945a_charger.c | 79 ++++++++++++++++++++++++++++++++-
1 file changed, 78 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c
index 48775f8..2f87599 100644
--- a/drivers/power/supply/act8945a_charger.c
+++ b/drivers/power/supply/act8945a_charger.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
static const char *act8945a_charger_model = "ACT8945A";
static const char *act8945a_charger_manufacturer = "Active-semi";
@@ -83,6 +84,7 @@ struct act8945a_charger {
struct work_struct work;
bool init_done;
+ struct gpio_desc *lbo_gpio;
};
static int act8945a_get_charger_state(struct regmap *regmap, int *val)
@@ -208,11 +210,67 @@ static int act8945a_get_battery_health(struct regmap *regmap, int *val)
return 0;
}
+static int act8945a_get_capacity_level(struct act8945a_charger *charger,
+ struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state, config;
+ int lbo_level = gpiod_get_value(charger->lbo_gpio);
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case APCH_STATE_CSTATE_FAST:
+ if (lbo_level)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+ else
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ if (status & APCH_STATUS_CHGDAT)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ if (config & APCH_CFG_SUSCHG) {
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ } else {
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ if (!(status & APCH_STATUS_INDAT)) {
+ if (!lbo_level)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ }
+ }
+ break;
+ }
+
+ return 0;
+}
+
static enum power_supply_property act8945a_charger_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER
};
@@ -238,6 +296,10 @@ static int act8945a_charger_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_HEALTH:
ret = act8945a_get_battery_health(regmap, &val->intval);
break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ ret = act8945a_get_capacity_level(charger,
+ regmap, &val->intval);
+ break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = act8945a_charger_model;
break;
@@ -335,7 +397,7 @@ static int act8945a_charger_config(struct device *dev,
u32 pre_time_out;
u32 input_voltage_threshold;
int chglev_pin;
- int ret;
+ int err, ret;
unsigned int tmp;
unsigned int value = 0;
@@ -354,6 +416,21 @@ static int act8945a_charger_config(struct device *dev,
dev_info(dev, "have been suspended\n");
}
+ charger->lbo_gpio = devm_gpiod_get_optional(dev, "active-semi,lbo",
+ GPIOD_IN);
+ if (IS_ERR(charger->lbo_gpio)) {
+ err = PTR_ERR(charger->lbo_gpio);
+ dev_err(dev, "unable to claim gpio \"lbo\": %d\n", err);
+ return err;
+ }
+
+ ret = devm_request_irq(dev, gpiod_to_irq(charger->lbo_gpio),
+ act8945a_status_changed,
+ (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
+ "act8945a_lbo_detect", charger);
+ if (ret)
+ dev_info(dev, "failed to request gpio \"lbo\" IRQ\n");
+
chglev_pin = of_get_named_gpio_flags(np,
"active-semi,chglev-gpios", 0, &flags);
--
2.7.4
next prev parent reply other threads:[~2016-09-01 9:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-01 9:29 [PATCH v9 0/4] power: act8945a_charger: Improvements Wenyou Yang
2016-09-01 9:29 ` Wenyou Yang [this message]
2016-09-01 12:43 ` [PATCH v9 1/4] power: act8945a_charger: Add capacity level property Sebastian Reichel
2016-09-01 9:29 ` [PATCH v9 2/4] power: act8945a_charger: Add max current property Wenyou Yang
2016-09-01 12:44 ` Sebastian Reichel
2016-09-01 9:30 ` [PATCH v9 3/4] doc: bindings: mfd: act8945a: Update the example Wenyou Yang
[not found] ` <1472722201-31872-4-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2016-09-01 11:22 ` Lee Jones
2016-09-01 12:47 ` Sebastian Reichel
2016-09-01 12:52 ` Wenyou.Yang-UWL1GkI3JZL3oGB3hsPCZA
2016-09-01 13:56 ` Lee Jones
2016-09-01 9:30 ` [PATCH v9 4/4] ARM: at91/dt: sama5d2_xplained: Add act8945a-charger node Wenyou Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472722201-31872-2-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang@atmel.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@atmel.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=wenyou.yang@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).