[PATCH v2] iio: sx9500: add final devicetree support

[Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>]

This makes sx9500 driver usable on devicetree based platforms too.

Signed-off-by: Christoph Fritz <chf.fritz-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---

Changes in v2:

 - fix docu: add optional property reset-gpios
 - adapt docu: change example "reset-gpios"

 .../devicetree/bindings/iio/proximity/sx9500.txt   | 24 ++++++++++++++++++++++
 drivers/iio/proximity/sx9500.c                     |  7 +++++++
 2 files changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/sx9500.txt

diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
new file mode 100644
index 0000000..b301dd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
@@ -0,0 +1,24 @@
+Semtech's SX9500 capacitive proximity button device driver
+
+Required properties:
+	- compatible: must be "semtech,sx9500"
+	- reg: i2c address where to find the device
+	- interrupt-parent : should be the phandle for the interrupt controller
+	- interrupts : the sole interrupt generated by the device
+
+	Refer to interrupt-controller/interrupts.txt for generic
+	interrupt client node bindings.
+
+Optional properties:
+	- reset-gpios: Reference to the GPIO connected to the device's active
+	  low reset pin.
+
+Example:
+
+sx9500@28 {
+	compatible = "semtech,sx9500";
+	reg = <0x28>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+};
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index 66cd09a..a136b34 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -1025,6 +1025,12 @@ static const struct acpi_device_id sx9500_acpi_match[] = {
 };
 MODULE_DEVICE_TABLE(acpi, sx9500_acpi_match);
 
+static const struct of_device_id sx9500_of_match[] = {
+	{ .compatible = "semtech,sx9500", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sx9500_of_match);
+
 static const struct i2c_device_id sx9500_id[] = {
 	{"sx9500", 0},
 	{ },
@@ -1035,6 +1041,7 @@ static struct i2c_driver sx9500_driver = {
 	.driver = {
 		.name	= SX9500_DRIVER_NAME,
 		.acpi_match_table = ACPI_PTR(sx9500_acpi_match),
+		.of_match_table = of_match_ptr(sx9500_of_match),
 		.pm = &sx9500_pm_ops,
 	},
 	.probe		= sx9500_probe,
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html