From: Srinivas Kandagatla <srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
tiwai-IBi9RG/b67k@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kwestfie-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Srinivas Kandagatla
<srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v5 5/5] arm64: dts: apq8016-sbc: add analog audio support with multicodec
Date: Thu, 8 Sep 2016 14:04:56 +0100 [thread overview]
Message-ID: <1473339896-9409-6-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1473339896-9409-1-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
This patch add support to Analog audio both Playback and Capture via
msm8916 WCD muti codec.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 63 +++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 9 +++++
arch/arm64/boot/dts/qcom/pm8916.dtsi | 45 +++++++++++++++++++++-
3 files changed, 116 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 18639bc..2c1801b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -15,6 +15,7 @@
#include "pm8916.dtsi"
#include "apq8016-sbc-soc-pins.dtsi"
#include "apq8016-sbc-pmic-pins.dtsi"
+#include <dt-bindings/sound/apq8016-lpass.h>
/ {
aliases {
@@ -180,6 +181,61 @@
lpass@07708000 {
status = "okay";
};
+
+ lpass_codec: codec{
+ status = "okay";
+ };
+
+ /*
+ Internal Codec
+ playback - Primary MI2S
+ capture - Ter MI2S
+
+ External Primary:
+ playback - secondary MI2S
+ capture - Quat MI2S
+
+ External Secondary:
+ playback - Quat MI2S
+ capture - Quat MI2S
+
+ */
+
+ sound: sound {
+ compatible = "qcom,apq8016-sbc-sndcard";
+ reg = <0x07702000 0x4>, <0x07702004 0x4>;
+ reg-names = "mic-iomux", "spkr-iomux";
+
+ status = "okay";
+ pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+ pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+ pinctrl-names = "default", "sleep";
+ qcom,model = "DB410c";
+ qcom,audio-routing =
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ internal-codec-playback-dai-link@0 { /* I2S - Internal codec */
+ link-name = "WCD";
+ cpu { /* PRIMARY */
+ sound-dai = <&lpass MI2S_PRIMARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+ };
+ };
+
+ internal-codec-capture-dai-link@0 { /* I2S - Internal codec */
+ link-name = "WCD-Capture";
+ cpu { /* PRIMARY */
+ sound-dai = <&lpass MI2S_TERTIARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+ };
+ };
+
+ };
};
usb2513 {
@@ -194,6 +250,13 @@
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
+
+};
+
+&wcd_codec {
+ status = "okay";
+ clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "mclk";
};
&smd_rpm_regulators {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 11bdc24..f0e7ebf 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -450,6 +450,15 @@
reg-names = "lpass-lpaif";
};
+ lpass_codec: codec{
+ compatible = "qcom,msm8916-wcd-digital-codec";
+ reg = <0x0771c000 0x400>;
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "ahbix-clk", "mclk";
+ #sound-dai-cells = <1>;
+ };
+
sdhc_1: sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index f71679b..6e30599 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -91,9 +91,52 @@
};
pm8916_1: pm8916@1 {
- compatible = "qcom,spmi-pmic";
+ compatible = "qcom,pm8916", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ wcd_codec: codec@f000 {
+ compatible = "qcom,msm8916-wcd-analog-codec";
+ reg = <0xf000 0x200>;
+ reg-names = "pmic-codec-core";
+ clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "mclk";
+ interrupt-parent = <&spmi_bus>;
+ interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+ <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+ <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+ interrupt-names = "cdc_spk_cnp_int",
+ "cdc_spk_clip_int",
+ "cdc_spk_ocp_int",
+ "mbhc_ins_rem_det1",
+ "mbhc_but_rel_det",
+ "mbhc_but_press_det",
+ "mbhc_ins_rem_det",
+ "mbhc_switch_int",
+ "cdc_ear_ocp_int",
+ "cdc_hphr_ocp_int",
+ "cdc_hphl_ocp_det",
+ "cdc_ear_cnp_int",
+ "cdc_hphr_cnp_int",
+ "cdc_hphl_cnp_int";
+ VDD-CDC-IO-supply = <&pm8916_l5>;
+ VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>;
+ VDD-MICBIAS-supply = <&pm8916_l13>;
+ #sound-dai-cells = <1>;
+
+ };
+
};
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2016-09-08 13:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-08 13:04 [PATCH v5 0/5] ASoC: Add support to Qualcomm msm8916-wcd multi codec Srinivas Kandagatla
2016-09-08 13:04 ` [PATCH v5 1/5] ASoC: codecs: Add msm8916-wcd analog codec Srinivas Kandagatla
2016-09-16 15:41 ` Rob Herring
2016-09-19 11:00 ` Srinivas Kandagatla
[not found] ` <1473339896-9409-2-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-16 15:43 ` Rob Herring
2016-09-08 13:04 ` [PATCH v5 4/5] ASoC: qcom: apq8016-sbc: Add support to multi codec Srinivas Kandagatla
2016-09-16 19:12 ` Rob Herring
2016-10-24 18:04 ` Applied "ASoC: qcom: apq8016-sbc: Add support to multi codec." to the asoc tree Mark Brown
[not found] ` <1473339896-9409-1-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-08 13:04 ` [PATCH v5 2/5] ASoC: codecs: Add msm8916-wcd digital codec Srinivas Kandagatla
[not found] ` <1473339896-9409-3-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-16 15:45 ` Rob Herring
2016-09-19 11:00 ` Srinivas Kandagatla
2016-09-08 13:04 ` [PATCH v5 3/5] ASoC: apq8016-sbc: dt bindings: remove incorrect property Srinivas Kandagatla
2016-09-16 15:45 ` Rob Herring
2016-10-24 18:04 ` Applied "ASoC: apq8016-sbc: dt bindings: remove incorrect property" to the asoc tree Mark Brown
2016-09-08 13:04 ` Srinivas Kandagatla [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473339896-9409-6-git-send-email-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kwestfie-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tiwai-IBi9RG/b67k@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).