[PATCH 2/4] serial: 8250: of: Load TX FIFO Load Size from DT

[<tthayer@opensource.altera.com>]

From: Thor Thayer <tthayer@opensource.altera.com>

Initialize the tx_loadsz parameter if it is defined in the
device tree.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/tty/serial/8250/8250_of.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 38963d7..3e4be2f 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -195,6 +195,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 	switch (port_type) {
 	case PORT_8250 ... PORT_MAX_8250:
 	{
+		u32 prop;
 		struct uart_8250_port port8250;
 		memset(&port8250, 0, sizeof(port8250));
 		port8250.port = port;
@@ -202,6 +203,11 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		if (port.fifosize)
 			port8250.capabilities = UART_CAP_FIFO;
 
+		/* Check for TX fifo load size */
+		if (of_property_read_u32(ofdev->dev.of_node,
+					 "tx-loadsz", &prop) == 0)
+			port8250.tx_loadsz = prop;
+
 		if (of_property_read_bool(ofdev->dev.of_node,
 					  "auto-flow-control"))
 			port8250.capabilities |= UART_CAP_AFE;
-- 
1.7.9.5