devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sinan Kaya <okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	timur-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	cov-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: agross-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	arnd-r2nGTMty4D4@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Sinan Kaya <okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Dan Williams
	<dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	Andy Shevchenko
	<andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH V2 08/10] dmaengine: qcom_hidma: add a common API to setup the interrupt
Date: Mon, 12 Sep 2016 09:03:02 -0400	[thread overview]
Message-ID: <1473685384-19913-9-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1473685384-19913-1-git-send-email-okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

Introducing the hidma_ll_setup_irq function to set up the interrupt
type externally from the OS interface.

Signed-off-by: Sinan Kaya <okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
 drivers/dma/qcom/hidma.h    |  2 ++
 drivers/dma/qcom/hidma_ll.c | 27 +++++++++++++++++++++++----
 2 files changed, 25 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 3f2ddd4..181f7e0 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -46,6 +46,7 @@ struct hidma_tre {
 };
 
 struct hidma_lldev {
+	bool msi_support;		/* flag indicating MSI support    */
 	bool initialized;		/* initialized flag               */
 	u8 trch_state;			/* trch_state of the device	  */
 	u8 evch_state;			/* evch_state of the device	  */
@@ -145,6 +146,7 @@ int hidma_ll_disable(struct hidma_lldev *lldev);
 int hidma_ll_enable(struct hidma_lldev *llhndl);
 void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
 	dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
+void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi);
 int hidma_ll_setup(struct hidma_lldev *lldev);
 struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,
 			void __iomem *trca, void __iomem *evca,
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 088935f..f0630e0 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -672,17 +672,36 @@ int hidma_ll_setup(struct hidma_lldev *lldev)
 	writel(HIDMA_EVRE_SIZE * nr_tres,
 			lldev->evca + HIDMA_EVCA_RING_LEN_REG);
 
-	/* support IRQ only for now */
+	/* configure interrupts */
+	hidma_ll_setup_irq(lldev, lldev->msi_support);
+
+	rc = hidma_ll_enable(lldev);
+	if (rc)
+		return rc;
+
+	return rc;
+}
+
+void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi)
+{
+	u32 val;
+
+	lldev->msi_support = msi;
+
+	/* disable interrupts again after reset */
+	writel(0, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+	writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+
+	/* support IRQ by default */
 	val = readl(lldev->evca + HIDMA_EVCA_INTCTRL_REG);
 	val &= ~0xF;
-	val |= 0x1;
+	if (!lldev->msi_support)
+		val = val | 0x1;
 	writel(val, lldev->evca + HIDMA_EVCA_INTCTRL_REG);
 
 	/* clear all pending interrupts and enable them */
 	writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
 	writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
-
-	return hidma_ll_enable(lldev);
 }
 
 struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-09-12 13:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-12 13:02 [PATCH V2 00/10] dmaengine: qcom_hidma: add MSI interrupt support Sinan Kaya
2016-09-12 13:02 ` [PATCH V2 01/10] Documentation: DT: qcom_hidma: update binding for MSI Sinan Kaya
2016-09-12 13:02 ` [PATCH V2 02/10] Documentation: DT: qcom_hidma: correct spelling mistakes Sinan Kaya
2016-09-12 13:02 ` [PATCH V2 03/10] of: irq: make of_msi_configure accessible from modules Sinan Kaya
2016-09-12 13:02 ` [PATCH V2 04/10] dmaengine: qcom_hidma: configure DMA and MSI for OF Sinan Kaya
2016-09-12 13:03 ` [PATCH V2 06/10] dmaengine: qcom_hidma: make error and success path common Sinan Kaya
2016-09-12 13:03 ` [PATCH V2 07/10] dmaengine: qcom_hidma: bring out interrupt cause Sinan Kaya
     [not found] ` <1473685384-19913-1-git-send-email-okaya-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-09-12 13:02   ` [PATCH V2 05/10] dmaengine: qcom_hidma: make pending_tre_count atomic Sinan Kaya
2016-09-12 13:03   ` Sinan Kaya [this message]
2016-09-12 13:03   ` [PATCH V2 09/10] dmaengine: qcom_hidma: protect common data structures Sinan Kaya
2016-09-12 13:03 ` [PATCH V2 10/10] dmaengine: qcom_hidma: add MSI support for interrupts Sinan Kaya
2016-09-13  3:46   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473685384-19913-9-git-send-email-okaya@codeaurora.org \
    --to=okaya-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=agross-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=cov-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=timur-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).