From: Po Liu <po.liu@nxp.com>
To: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>,
Shawn Guo <shawnguo@kernel.org>,
Marc Zyngier <marc.zyngier@arm.com>,
Rob Herring <robh@kernel.org>, Roy Zang <roy.zang@nxp.com>,
Mingkai Hu <mingkai.hu@nxp.com>,
Stuart Yoder <stuart.yoder@nxp.com>,
Yang-Leo Li <leoyang.li@nxp.com>, Arnd Bergmann <arnd@arndb.de>,
Minghuan Lian <minghuan.lian@nxp.com>,
Murali Karicheri <m-karicheri2@ti.com>, Po Liu <po.liu@nxp.com>
Subject: [PATCH v5 2/3] arm64/dts: add pcie aer interrupt-name property in the dts
Date: Tue, 13 Sep 2016 12:40:58 +0800 [thread overview]
Message-ID: <1473741659-17618-2-git-send-email-po.liu@nxp.com> (raw)
In-Reply-To: <1473741659-17618-1-git-send-email-po.liu@nxp.com>
Some platforms(NXP Layerscape for example) aer interrupt was not
MSI/MSI-X/INTx but using interrupt line independently. This patch
add a "aer" interrupt-names for aer interrupt.
With the interrupt-names "aer", code could probe aer interrupt line
for pcie root port, replace the aer interrupt service irq.
This is intend to fixup the Layerscape platforms which aer interrupt
was not MSI/MSI-X/INTx, but using interrupt line independently.
Signed-off-by: Po Liu <po.liu@nxp.com>
---
changes for v5:
- Seperate arm and arm64 dts modification into two patches
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++---------
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 16 ++++++++--------
2 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index e669fbd..654071d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -527,9 +527,9 @@
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>, /* controller interrupt */
- <0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupts = <0 117 0x4>, /* PME interrupt */
+ <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -552,9 +552,9 @@
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 128 0x4>,
- <0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 127 0x4>,
+ <0 128 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -577,9 +577,9 @@
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 162 0x4>,
- <0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 161 0x4>,
+ <0 162 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 21023a3..58844e8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -583,8 +583,8 @@
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x10 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 108 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 108 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -607,8 +607,8 @@
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x12 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 113 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 113 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -631,8 +631,8 @@
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x14 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -655,8 +655,8 @@
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x16 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 123 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 123 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
--
2.1.0.27.g96db324
next prev parent reply other threads:[~2016-09-13 4:40 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-26 6:00 [PATCH 2/2] aer: add support aer interrupt with none MSI/MSI-X/INTx mode Po Liu
2016-06-02 3:48 ` Bjorn Helgaas
2016-06-02 5:01 ` Po Liu
2016-06-02 13:55 ` Bjorn Helgaas
2016-06-02 15:37 ` Murali Karicheri
2016-06-03 4:09 ` Bjorn Helgaas
2016-06-03 17:31 ` Murali Karicheri
2016-06-04 3:48 ` Bjorn Helgaas
2016-06-06 7:32 ` Po Liu
2016-06-06 14:01 ` Murali Karicheri
2016-06-06 18:10 ` Bjorn Helgaas
2016-06-07 10:07 ` Po Liu
2016-06-07 22:46 ` Bjorn Helgaas
2016-06-08 4:56 ` Po Liu
2016-06-14 6:12 ` [PATCH v2 1/2] nxp/dts: add pcie aer interrupt-name property in the dts Po Liu
2016-06-14 6:12 ` [PATCH v2 2/2] pci/aer: interrupt fixup in the quirk Po Liu
2016-06-16 13:54 ` Bjorn Helgaas
2016-06-17 3:30 ` Po Liu
2016-07-01 8:46 ` Po Liu
2016-06-14 8:24 ` [PATCH v3 1/2] nxp/dts: add pcie aer interrupt-name property in the dts Po Liu
2016-06-14 8:24 ` [PATCH v3 2/2] pci/aer: interrupt fixup in the quirk Po Liu
2016-06-23 5:43 ` Dongdong Liu
2016-07-01 8:40 ` Po Liu
2016-07-04 8:44 ` Dongdong Liu
2016-07-05 3:03 ` Po Liu
2016-07-06 8:38 ` Dongdong Liu
[not found] ` <1465892645-32381-2-git-send-email-po.liu-3arQi8VN3Tc@public.gmane.org>
2016-07-29 22:41 ` Bjorn Helgaas
2016-08-22 10:09 ` Po Liu
2016-09-20 20:47 ` Bjorn Helgaas
2016-09-21 6:51 ` Po Liu
2016-09-21 21:53 ` Bjorn Helgaas
2016-08-31 6:37 ` [PATCH v4 1/2] nxp/dts: add pcie aer interrupt-name property in the dts Po Liu
2016-08-31 6:37 ` [PATCH v4 2/2] pci:aer: add support aer interrupt with none MSI/MSI-X/INTx mode Po Liu
2016-09-02 15:17 ` Rob Herring
2016-09-05 6:05 ` Po Liu
2016-09-13 4:40 ` [PATCH v5 1/3] arm/dts: add pcie aer interrupt-name property in the dts Po Liu
2016-09-13 4:40 ` Po Liu [this message]
2016-09-13 4:40 ` [PATCH v5 3/3] pci:aer: add support aer interrupt with none MSI/MSI-X/INTx mode Po Liu
[not found] ` <1473741659-17618-3-git-send-email-po.liu-3arQi8VN3Tc@public.gmane.org>
2016-09-18 0:52 ` Shawn Guo
2016-09-18 3:37 ` Po Liu
[not found] ` <VI1PR0401MB1709F91B0C1EB6C80D741E4492F50-9IDQY6o3qQhWumToEB7uiI3W/0Ik+aLCnBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2016-09-20 12:39 ` Shawn Guo
2016-09-21 6:54 ` Po Liu
2016-09-30 22:13 ` Shawn Guo
2016-09-23 13:06 ` Rob Herring
2016-09-26 8:25 ` Po Liu
2016-09-21 22:37 ` Bjorn Helgaas
2016-09-22 2:53 ` Po Liu
2016-09-30 9:11 ` [PATCH v6 1/3] arm/dts-ls1021: add pcie aer/pme interrupt-name property in the dts Po Liu
2016-09-30 9:11 ` [PATCH v6 2/3] arm64/dts-ls1043-ls2080: " Po Liu
2016-09-30 9:11 ` [PATCH v6 3/3] pci:add support aer/pme interrupts with none MSI/MSI-X/INTx mode Po Liu
[not found] ` <1475226697-7709-3-git-send-email-po.liu-3arQi8VN3Tc@public.gmane.org>
2016-10-08 20:49 ` Rob Herring
2016-10-09 2:47 ` Po Liu
2016-09-05 2:25 ` [PATCH v4 1/2] nxp/dts: add pcie aer interrupt-name property in the dts Shawn Guo
[not found] ` <1472625442-23309-1-git-send-email-po.liu-3arQi8VN3Tc@public.gmane.org>
2016-09-12 22:13 ` Bjorn Helgaas
2016-09-13 3:02 ` Po Liu
2016-06-16 0:36 ` [PATCH v3 " Shawn Guo
2016-06-16 10:50 ` Po Liu
2016-06-16 22:19 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473741659-17618-2-git-send-email-po.liu@nxp.com \
--to=po.liu@nxp.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=m-karicheri2@ti.com \
--cc=marc.zyngier@arm.com \
--cc=minghuan.lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh@kernel.org \
--cc=roy.zang@nxp.com \
--cc=shawnguo@kernel.org \
--cc=stuart.yoder@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).