From: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
To: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Cc: "Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Arnd Bergmann" <arnd-r2nGTMty4D4@public.gmane.org>,
"Marek Vasut" <marex-ynQEQJNshbs@public.gmane.org>,
"Lothar Waßmann"
<lw-AvR2QvxeiV7DiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>,
"Sascha Hauer" <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Jörg Krause"
<joerg.krause-L1vi/lXTdtsfGbAt6QbQcg@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Stefan Wahren" <stefan.wahren-eS4NqCHxEME@public.gmane.org>
Subject: [PATCH 0/4] ARM: boot: mxs: Add On-Chip RAM
Date: Tue, 13 Sep 2016 17:51:02 +0000 [thread overview]
Message-ID: <1473789066-8955-1-git-send-email-stefan.wahren@i2se.com> (raw)
The i.MX23 / i.MX28 have a small amount of On-Chip RAM which is also necessary
for suspend to RAM and standby mode. But before we need to remove the fake reg
properties of all internal bus nodes as discussed in this thread [1].
This patch series requires Fabio Estevam's recent series "ARM: dts: imx23:
Remove skeleton.dtsi inclusion" [2].
[1] - https://marc.info/?l=devicetree&m=146139948426520&w=2
[2] - http://www.spinics.net/lists/arm-kernel/msg528974.html
Stefan Wahren (4):
ARM: dts: imx23: Remove fake "reg" properties from bus nodes
ARM: dts: imx28: Remove fake "reg" properties from bus nodes
ARM: dts: imx23: add On-Chip RAM
ARM: dts: imx28: add On-Chip RAM
arch/arm/boot/dts/imx23-evk.dts | 8 ++++----
arch/arm/boot/dts/imx23-olinuxino.dts | 8 ++++----
arch/arm/boot/dts/imx23-sansa.dts | 8 ++++----
arch/arm/boot/dts/imx23-stmp378x_devb.dts | 6 +++---
arch/arm/boot/dts/imx23-xfi3.dts | 8 ++++----
arch/arm/boot/dts/imx23.dtsi | 15 +++++++++------
arch/arm/boot/dts/imx28-apf28.dts | 8 ++++----
arch/arm/boot/dts/imx28-apf28dev.dts | 8 ++++----
arch/arm/boot/dts/imx28-apx4devkit.dts | 8 ++++----
arch/arm/boot/dts/imx28-cfa10036.dts | 8 ++++----
arch/arm/boot/dts/imx28-cfa10037.dts | 8 ++++----
arch/arm/boot/dts/imx28-cfa10049.dts | 10 +++++-----
arch/arm/boot/dts/imx28-cfa10055.dts | 6 +++---
arch/arm/boot/dts/imx28-cfa10056.dts | 4 ++--
arch/arm/boot/dts/imx28-cfa10057.dts | 10 +++++-----
arch/arm/boot/dts/imx28-cfa10058.dts | 10 +++++-----
arch/arm/boot/dts/imx28-duckbill.dts | 8 ++++----
arch/arm/boot/dts/imx28-evk.dts | 8 ++++----
arch/arm/boot/dts/imx28-m28.dtsi | 6 +++---
arch/arm/boot/dts/imx28-m28cu3.dts | 8 ++++----
arch/arm/boot/dts/imx28-m28evk.dts | 8 ++++----
arch/arm/boot/dts/imx28-sps1.dts | 8 ++++----
arch/arm/boot/dts/imx28.dtsi | 17 +++++++++--------
23 files changed, 100 insertions(+), 96 deletions(-)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-09-13 17:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-13 17:51 Stefan Wahren [this message]
[not found] ` <1473789066-8955-1-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>
2016-09-13 17:51 ` [PATCH 1/4] ARM: dts: imx23: Remove fake "reg" properties from bus nodes Stefan Wahren
2016-09-13 17:51 ` [PATCH 2/4] ARM: dts: imx28: " Stefan Wahren
2016-09-13 17:51 ` [PATCH 3/4] ARM: dts: imx23: add On-Chip RAM Stefan Wahren
2016-09-13 17:51 ` [PATCH 4/4] ARM: dts: imx28: " Stefan Wahren
2016-10-20 15:33 ` [PATCH 0/4] ARM: boot: mxs: Add " Stefan Wahren
2016-10-21 13:53 ` Shawn Guo
2016-10-21 14:05 ` Stefan Wahren
[not found] ` <9bf7c925-bdc2-d0b8-9886-70d46383d1e0-eS4NqCHxEME@public.gmane.org>
2016-10-21 15:03 ` Shawn Guo
2016-10-21 15:24 ` Stefan Wahren
[not found] ` <e472fb62-00d2-359d-2126-ce2727fe3bed-eS4NqCHxEME@public.gmane.org>
2016-10-21 15:30 ` Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473789066-8955-1-git-send-email-stefan.wahren@i2se.com \
--to=stefan.wahren-es4nqchxeme@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=joerg.krause-L1vi/lXTdtsfGbAt6QbQcg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=lw-AvR2QvxeiV7DiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).