From: Peter Griffin <peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org,
patrice.chotard-qxv4g6HH51o@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Subject: [PATCH 15/19] reset: sti: Remove STiH415/6 reset support
Date: Wed, 14 Sep 2016 14:27:53 +0100 [thread overview]
Message-ID: <1473859677-9231-16-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1473859677-9231-1-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Support for STiH415/6 SoCs is being removed from the
kernel because the platforms are obsolete. This patch removes
the reset drivers for these SoC's.
Signed-off-by: Peter Griffin <peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/mach-sti/Kconfig | 2 -
drivers/reset/sti/Kconfig | 8 ---
drivers/reset/sti/Makefile | 2 -
drivers/reset/sti/reset-stih415.c | 112 -----------------------------
drivers/reset/sti/reset-stih416.c | 143 --------------------------------------
5 files changed, 267 deletions(-)
delete mode 100644 drivers/reset/sti/reset-stih415.c
delete mode 100644 drivers/reset/sti/reset-stih416.c
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index 119e110..f8eeeff 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -28,7 +28,6 @@ if ARCH_STI
config SOC_STIH415
bool "STiH415 STMicroelectronics Consumer Electronics family"
default y
- select STIH415_RESET
help
This enables support for STMicroelectronics Digital Consumer
Electronics family StiH415 parts, primarily targeted at set-top-box
@@ -38,7 +37,6 @@ config SOC_STIH415
config SOC_STIH416
bool "STiH416 STMicroelectronics Consumer Electronics family"
default y
- select STIH416_RESET
help
This enables support for STMicroelectronics Digital Consumer
Electronics family StiH416 parts, primarily targeted at set-top-box
diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig
index 6131785..71592b5 100644
--- a/drivers/reset/sti/Kconfig
+++ b/drivers/reset/sti/Kconfig
@@ -3,14 +3,6 @@ if ARCH_STI
config STI_RESET_SYSCFG
bool
-config STIH415_RESET
- bool
- select STI_RESET_SYSCFG
-
-config STIH416_RESET
- bool
- select STI_RESET_SYSCFG
-
config STIH407_RESET
bool
select STI_RESET_SYSCFG
diff --git a/drivers/reset/sti/Makefile b/drivers/reset/sti/Makefile
index dc85dfb..f9d8241 100644
--- a/drivers/reset/sti/Makefile
+++ b/drivers/reset/sti/Makefile
@@ -1,5 +1,3 @@
obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o
-obj-$(CONFIG_STIH415_RESET) += reset-stih415.o
-obj-$(CONFIG_STIH416_RESET) += reset-stih416.o
obj-$(CONFIG_STIH407_RESET) += reset-stih407.o
diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c
deleted file mode 100644
index 6f220cd..0000000
--- a/drivers/reset/sti/reset-stih415.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited
- * Author: Stephen Gallimore <stephen.gallimore-qxv4g6HH51o@public.gmane.org>
- * Author: Srinivas Kandagatla <srinivas.kandagatla-qxv4g6HH51o@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-
-#include <dt-bindings/reset/stih415-resets.h>
-
-#include "reset-syscfg.h"
-
-/*
- * STiH415 Peripheral powerdown definitions.
- */
-static const char stih415_front[] = "st,stih415-front-syscfg";
-static const char stih415_rear[] = "st,stih415-rear-syscfg";
-static const char stih415_sbc[] = "st,stih415-sbc-syscfg";
-static const char stih415_lpm[] = "st,stih415-lpm-syscfg";
-
-#define STIH415_PDN_FRONT(_bit) \
- _SYSCFG_RST_CH(stih415_front, SYSCFG_114, _bit, SYSSTAT_187, _bit)
-
-#define STIH415_PDN_REAR(_cntl, _stat) \
- _SYSCFG_RST_CH(stih415_rear, SYSCFG_336, _cntl, SYSSTAT_384, _stat)
-
-#define STIH415_SRST_REAR(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih415_rear, _reg, _bit)
-
-#define STIH415_SRST_SBC(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih415_sbc, _reg, _bit)
-
-#define STIH415_SRST_FRONT(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih415_front, _reg, _bit)
-
-#define STIH415_SRST_LPM(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih415_lpm, _reg, _bit)
-
-#define SYSCFG_114 0x38 /* Powerdown request EMI/NAND/Keyscan */
-#define SYSSTAT_187 0x15c /* Powerdown status EMI/NAND/Keyscan */
-
-#define SYSCFG_336 0x90 /* Powerdown request USB/SATA/PCIe */
-#define SYSSTAT_384 0x150 /* Powerdown status USB/SATA/PCIe */
-
-#define SYSCFG_376 0x130 /* Reset generator 0 control 0 */
-#define SYSCFG_166 0x108 /* Softreset Ethernet 0 */
-#define SYSCFG_31 0x7c /* Softreset Ethernet 1 */
-#define LPM_SYSCFG_1 0x4 /* Softreset IRB */
-
-static const struct syscfg_reset_channel_data stih415_powerdowns[] = {
- [STIH415_EMISS_POWERDOWN] = STIH415_PDN_FRONT(0),
- [STIH415_NAND_POWERDOWN] = STIH415_PDN_FRONT(1),
- [STIH415_KEYSCAN_POWERDOWN] = STIH415_PDN_FRONT(2),
- [STIH415_USB0_POWERDOWN] = STIH415_PDN_REAR(0, 0),
- [STIH415_USB1_POWERDOWN] = STIH415_PDN_REAR(1, 1),
- [STIH415_USB2_POWERDOWN] = STIH415_PDN_REAR(2, 2),
- [STIH415_SATA0_POWERDOWN] = STIH415_PDN_REAR(3, 3),
- [STIH415_SATA1_POWERDOWN] = STIH415_PDN_REAR(4, 4),
- [STIH415_PCIE_POWERDOWN] = STIH415_PDN_REAR(5, 8),
-};
-
-static const struct syscfg_reset_channel_data stih415_softresets[] = {
- [STIH415_ETH0_SOFTRESET] = STIH415_SRST_FRONT(SYSCFG_166, 0),
- [STIH415_ETH1_SOFTRESET] = STIH415_SRST_SBC(SYSCFG_31, 0),
- [STIH415_IRB_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 6),
- [STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9),
- [STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10),
- [STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11),
- [STIH415_KEYSCAN_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 8),
-};
-
-static struct syscfg_reset_controller_data stih415_powerdown_controller = {
- .wait_for_ack = true,
- .nr_channels = ARRAY_SIZE(stih415_powerdowns),
- .channels = stih415_powerdowns,
-};
-
-static struct syscfg_reset_controller_data stih415_softreset_controller = {
- .wait_for_ack = false,
- .active_low = true,
- .nr_channels = ARRAY_SIZE(stih415_softresets),
- .channels = stih415_softresets,
-};
-
-static const struct of_device_id stih415_reset_match[] = {
- { .compatible = "st,stih415-powerdown",
- .data = &stih415_powerdown_controller, },
- { .compatible = "st,stih415-softreset",
- .data = &stih415_softreset_controller, },
- {},
-};
-
-static struct platform_driver stih415_reset_driver = {
- .probe = syscfg_reset_probe,
- .driver = {
- .name = "reset-stih415",
- .of_match_table = stih415_reset_match,
- },
-};
-
-static int __init stih415_reset_init(void)
-{
- return platform_driver_register(&stih415_reset_driver);
-}
-arch_initcall(stih415_reset_init);
diff --git a/drivers/reset/sti/reset-stih416.c b/drivers/reset/sti/reset-stih416.c
deleted file mode 100644
index c581d606e..0000000
--- a/drivers/reset/sti/reset-stih416.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited
- * Author: Stephen Gallimore <stephen.gallimore-qxv4g6HH51o@public.gmane.org>
- * Author: Srinivas Kandagatla <srinivas.kandagatla-qxv4g6HH51o@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-
-#include <dt-bindings/reset/stih416-resets.h>
-
-#include "reset-syscfg.h"
-
-/*
- * STiH416 Peripheral powerdown definitions.
- */
-static const char stih416_front[] = "st,stih416-front-syscfg";
-static const char stih416_rear[] = "st,stih416-rear-syscfg";
-static const char stih416_sbc[] = "st,stih416-sbc-syscfg";
-static const char stih416_lpm[] = "st,stih416-lpm-syscfg";
-static const char stih416_cpu[] = "st,stih416-cpu-syscfg";
-
-#define STIH416_PDN_FRONT(_bit) \
- _SYSCFG_RST_CH(stih416_front, SYSCFG_1500, _bit, SYSSTAT_1578, _bit)
-
-#define STIH416_PDN_REAR(_cntl, _stat) \
- _SYSCFG_RST_CH(stih416_rear, SYSCFG_2525, _cntl, SYSSTAT_2583, _stat)
-
-#define SYSCFG_1500 0x7d0 /* Powerdown request EMI/NAND/Keyscan */
-#define SYSSTAT_1578 0x908 /* Powerdown status EMI/NAND/Keyscan */
-
-#define SYSCFG_2525 0x834 /* Powerdown request USB/SATA/PCIe */
-#define SYSSTAT_2583 0x91c /* Powerdown status USB/SATA/PCIe */
-
-#define SYSCFG_2552 0x8A0 /* Reset Generator control 0 */
-#define SYSCFG_1539 0x86c /* Softreset Ethernet 0 */
-#define SYSCFG_510 0x7f8 /* Softreset Ethernet 1 */
-#define LPM_SYSCFG_1 0x4 /* Softreset IRB */
-#define SYSCFG_2553 0x8a4 /* Softreset SATA0/1, PCIE0/1 */
-#define SYSCFG_7563 0x8cc /* MPE softresets 0 */
-#define SYSCFG_7564 0x8d0 /* MPE softresets 1 */
-
-#define STIH416_SRST_CPU(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih416_cpu, _reg, _bit)
-
-#define STIH416_SRST_FRONT(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih416_front, _reg, _bit)
-
-#define STIH416_SRST_REAR(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih416_rear, _reg, _bit)
-
-#define STIH416_SRST_LPM(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih416_lpm, _reg, _bit)
-
-#define STIH416_SRST_SBC(_reg, _bit) \
- _SYSCFG_RST_CH_NO_ACK(stih416_sbc, _reg, _bit)
-
-static const struct syscfg_reset_channel_data stih416_powerdowns[] = {
- [STIH416_EMISS_POWERDOWN] = STIH416_PDN_FRONT(0),
- [STIH416_NAND_POWERDOWN] = STIH416_PDN_FRONT(1),
- [STIH416_KEYSCAN_POWERDOWN] = STIH416_PDN_FRONT(2),
- [STIH416_USB0_POWERDOWN] = STIH416_PDN_REAR(0, 0),
- [STIH416_USB1_POWERDOWN] = STIH416_PDN_REAR(1, 1),
- [STIH416_USB2_POWERDOWN] = STIH416_PDN_REAR(2, 2),
- [STIH416_USB3_POWERDOWN] = STIH416_PDN_REAR(6, 5),
- [STIH416_SATA0_POWERDOWN] = STIH416_PDN_REAR(3, 3),
- [STIH416_SATA1_POWERDOWN] = STIH416_PDN_REAR(4, 4),
- [STIH416_PCIE0_POWERDOWN] = STIH416_PDN_REAR(7, 9),
- [STIH416_PCIE1_POWERDOWN] = STIH416_PDN_REAR(5, 8),
-};
-
-static const struct syscfg_reset_channel_data stih416_softresets[] = {
- [STIH416_ETH0_SOFTRESET] = STIH416_SRST_FRONT(SYSCFG_1539, 0),
- [STIH416_ETH1_SOFTRESET] = STIH416_SRST_SBC(SYSCFG_510, 0),
- [STIH416_IRB_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 6),
- [STIH416_USB0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 9),
- [STIH416_USB1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 10),
- [STIH416_USB2_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 11),
- [STIH416_USB3_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 28),
- [STIH416_SATA0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 7),
- [STIH416_SATA1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 3),
- [STIH416_PCIE0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 15),
- [STIH416_PCIE1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 2),
- [STIH416_AUD_DAC_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 14),
- [STIH416_HDTVOUT_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 5),
- [STIH416_VTAC_M_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 25),
- [STIH416_VTAC_A_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 26),
- [STIH416_SYNC_HD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 5),
- [STIH416_SYNC_SD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 6),
- [STIH416_BLITTER_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 10),
- [STIH416_GPU_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 11),
- [STIH416_VTAC_M_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 18),
- [STIH416_VTAC_A_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 19),
- [STIH416_VTG_AUX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 21),
- [STIH416_JPEG_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 23),
- [STIH416_HVA_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 2),
- [STIH416_COMPO_M_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 3),
- [STIH416_COMPO_A_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 4),
- [STIH416_VP8_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 10),
- [STIH416_VTG_MAIN_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 16),
- [STIH416_KEYSCAN_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 8),
-};
-
-static struct syscfg_reset_controller_data stih416_powerdown_controller = {
- .wait_for_ack = true,
- .nr_channels = ARRAY_SIZE(stih416_powerdowns),
- .channels = stih416_powerdowns,
-};
-
-static struct syscfg_reset_controller_data stih416_softreset_controller = {
- .wait_for_ack = false,
- .active_low = true,
- .nr_channels = ARRAY_SIZE(stih416_softresets),
- .channels = stih416_softresets,
-};
-
-static const struct of_device_id stih416_reset_match[] = {
- { .compatible = "st,stih416-powerdown",
- .data = &stih416_powerdown_controller, },
- { .compatible = "st,stih416-softreset",
- .data = &stih416_softreset_controller, },
- {},
-};
-
-static struct platform_driver stih416_reset_driver = {
- .probe = syscfg_reset_probe,
- .driver = {
- .name = "reset-stih416",
- .of_match_table = stih416_reset_match,
- },
-};
-
-static int __init stih416_reset_init(void)
-{
- return platform_driver_register(&stih416_reset_driver);
-}
-arch_initcall(stih416_reset_init);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-09-14 13:27 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-14 13:27 [PATCH 00/19] [RESEND] Remove STiH415 and STiH416 SoC platform support Peter Griffin
2016-09-14 13:27 ` [PATCH 02/19] phy: stih41x-usb: Remove usb phy driver and dt binding documentation Peter Griffin
2016-09-23 15:06 ` Rob Herring
2016-10-18 7:47 ` Patrice Chotard
[not found] ` <778bd4b2-9e82-326b-f6e0-43360323d453-qxv4g6HH51o@public.gmane.org>
2016-10-18 8:52 ` [STLinux Kernel] " Patrice Chotard
2016-10-18 9:06 ` Kishon Vijay Abraham I
[not found] ` <1473859677-9231-3-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-11-15 13:07 ` Kishon Vijay Abraham I
2016-09-14 13:27 ` [PATCH 06/19] ARM: multi_v7_defconfig: Remove stih41x phy Kconfig symbol Peter Griffin
[not found] ` <1473859677-9231-7-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-10-18 7:53 ` Patrice Chotard
2016-09-14 13:27 ` [PATCH 07/19] ahci: st: Remove STiH416 dt example Peter Griffin
[not found] ` <1473859677-9231-8-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-16 15:54 ` Tejun Heo
2016-09-19 7:19 ` Patrice Chotard
2016-09-23 15:07 ` Rob Herring
2016-09-14 13:27 ` [PATCH 08/19] thermal: sti: Remove obsolete platforms from the DT doc Peter Griffin
[not found] ` <1473859677-9231-9-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-23 15:08 ` Rob Herring
2016-10-18 7:56 ` Patrice Chotard
2016-09-14 13:27 ` [PATCH 10/19] watchdog: bindings: Remove obsolete platforms from dt doc Peter Griffin
2016-09-14 22:16 ` Guenter Roeck
[not found] ` <1473859677-9231-11-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-23 15:08 ` Rob Herring
2016-10-08 14:04 ` Wim Van Sebroeck
2016-09-14 13:27 ` [PATCH 12/19] reset: sti: Remove obsolete platforms from dt binding doc Peter Griffin
2016-09-23 15:10 ` Rob Herring
2016-10-18 8:02 ` Patrice Chotard
[not found] ` <1473859677-9231-1-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-14 13:27 ` [PATCH 01/19] phy: phy-miphy365x: Remove miphy365 driver and dt binding documentation Peter Griffin
[not found] ` <1473859677-9231-2-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-23 15:06 ` Rob Herring
2016-10-18 7:47 ` Patrice Chotard
[not found] ` <12506413-515f-1a33-a642-ede60287ca3b-qxv4g6HH51o@public.gmane.org>
2016-10-18 8:45 ` [STLinux Kernel] " Patrice Chotard
[not found] ` <75b370f3-a1cd-ac6e-ce8a-b77e4c0c3847-qxv4g6HH51o@public.gmane.org>
2016-10-18 9:18 ` Kishon Vijay Abraham I
2016-09-14 13:27 ` [PATCH 03/19] MAINTAINERS: Remove phy-miphy365x.c entry from STi arch Peter Griffin
2016-10-18 7:48 ` Patrice Chotard
2016-09-14 13:27 ` [PATCH 04/19] MAINTAINERS: Remove phy-stih41x-usb.c " Peter Griffin
[not found] ` <1473859677-9231-5-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-10-18 7:50 ` Patrice Chotard
2016-09-14 13:27 ` [PATCH 05/19] ARM: multi_v7_defconfig: Remove miphy365 phy Peter Griffin
[not found] ` <1473859677-9231-6-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-10-18 7:53 ` Patrice Chotard
2016-10-18 9:22 ` Patrice Chotard
2016-09-14 13:27 ` [PATCH 09/19] thermal: sti: Remove obsolete STiH416 platform support Peter Griffin
2016-09-14 13:27 ` [PATCH 11/19] watchdog: st_wdt: Remove support for obsolete platforms Peter Griffin
2016-09-14 22:16 ` Guenter Roeck
2016-09-14 13:27 ` [PATCH 13/19] pinctrl: st: Remove STiH415/6 SoC pinctrl driver support Peter Griffin
[not found] ` <1473859677-9231-14-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-15 12:33 ` Linus Walleij
2016-09-14 13:27 ` Peter Griffin [this message]
[not found] ` <1473859677-9231-16-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-27 8:02 ` [PATCH 15/19] reset: sti: Remove STiH415/6 reset support Philipp Zabel
2016-10-11 7:05 ` Patrice Chotard
2016-10-20 10:36 ` Philipp Zabel
2016-09-14 13:38 ` [PATCH 00/19] [RESEND] Remove STiH415 and STiH416 SoC platform support Arnd Bergmann
2016-09-14 14:04 ` Patrice Chotard
2016-09-15 7:01 ` Peter Griffin
2016-09-15 12:00 ` Arnd Bergmann
2016-09-19 8:56 ` Peter Griffin
2016-09-14 13:27 ` [PATCH 14/19] pinctrl: st: Remove obsolete platforms from pinctrl-st dt doc Peter Griffin
[not found] ` <1473859677-9231-15-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-15 12:37 ` Linus Walleij
2016-09-14 13:27 ` [PATCH 16/19] power: reset: st-poweroff: Remove obsolete platforms Peter Griffin
2016-09-19 19:34 ` Sebastian Reichel
2016-09-14 13:27 ` [PATCH 17/19] power: reset: st: Remove obsolete platforms from dt doc Peter Griffin
[not found] ` <1473859677-9231-18-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-19 19:34 ` Sebastian Reichel
2016-09-14 13:27 ` [PATCH 18/19] stmmac: dwmac-sti: Remove obsolete STi platforms Peter Griffin
2016-09-23 15:11 ` Rob Herring
2016-10-18 8:05 ` Patrice Chotard
[not found] ` <dcbb8065-b272-0a2f-8efb-c55217712caf-qxv4g6HH51o@public.gmane.org>
2016-10-18 8:59 ` [STLinux Kernel] " Patrice Chotard
2016-09-14 13:27 ` [PATCH 19/19] reset: sti: softreset: Remove obsolete platforms from dt binding doc Peter Griffin
[not found] ` <1473859677-9231-20-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-23 15:12 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473859677-9231-16-git-send-email-peter.griffin@linaro.org \
--to=peter.griffin-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=patrice.chotard-qxv4g6HH51o@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).