From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srinivas Kandagatla Subject: [PATCH 1/2] pinctrl: pm8994: add pad voltage regulator defines Date: Fri, 16 Sep 2016 18:41:20 +0100 Message-ID: <1474047681-6821-2-git-send-email-srinivas.kandagatla@linaro.org> References: <1474047681-6821-1-git-send-email-srinivas.kandagatla@linaro.org> Return-path: In-Reply-To: <1474047681-6821-1-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Andy Gross Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, Srinivas Kandagatla List-Id: devicetree@vger.kernel.org This patch adds defines for internal voltage regulators used to switch voltage levels on gpio/mpp pads. Signed-off-by: Srinivas Kandagatla --- include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 4 ++++ include/dt-bindings/pinctrl/qcom,pmic-mpp.h | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h index aafa76c..d33f17c 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -89,6 +89,10 @@ #define PMA8084_GPIO_S4 2 #define PMA8084_GPIO_L6 3 +#define PM8994_GPIO_VPH 0 +#define PM8994_GPIO_S4 2 +#define PM8994_GPIO_L12 3 + /* To be used with "function" */ #define PMIC_GPIO_FUNC_NORMAL "normal" #define PMIC_GPIO_FUNC_PAIRED "paired" diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h index a15c170..2e360d8f 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h @@ -65,6 +65,12 @@ #define PMA8084_MPP_S4 2 #define PMA8084_MPP_L6 3 +#define PM8994_MPP_VPH 0 +/* Only supported for MPP_05-MPP_08 */ +#define PM8994_MPP_L19 1 +#define PM8994_MPP_S4 2 +#define PM8994_MPP_L12 3 + /* * Analog Input - Set the source for analog input. * To be used with "qcom,amux-route" property -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html