[PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties
@ 2016-09-16 21:41 Krzysztof Kozlowski
  2016-09-16 21:41 ` [PATCH 1/7] arm64: dts: exynos: Use human-friendly symbols for interrupt properties in exynos7 Krzysztof Kozlowski
                   ` (4 more replies)
  0 siblings, 5 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 21:41 UTC (permalink / raw)
  To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
	Catalin Marinas, Will Deacon, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

Hi,

Based on top of [1]. Shouldn't make any difference - tested with dtx_diff.

Best regards,
Krzysztof

[1] http://www.spinics.net/lists/arm-kernel/msg532489.html


Krzysztof Kozlowski (7):
  arm64: dts: exynos: Use human-friendly symbols for interrupt
    properties in exynos7
  ARM: dts: exynos: Use human-friendly symbols for interrupt properties
    in exynos3250
  ARM: dts: exynos: Use human-friendly symbols for interrupt properties
    in exynos4
  ARM: dts: exynos: Use human-friendly symbols for interrupt properties
    in exynos5
  ARM: dts: exynos: Use human-friendly symbols for interrupt properties
    in exynos4415
  ARM: dts: exynos: Use human-friendly symbols for interrupt properties
    in exynos5260
  ARM: dts: exynos: Use human-friendly symbols for interrupt properties
    in exynos5440

 arch/arm/boot/dts/exynos3250-pinctrl.dtsi       |  32 +++----
 arch/arm/boot/dts/exynos3250.dtsi               | 112 ++++++++++++------------
 arch/arm/boot/dts/exynos4.dtsi                  |  99 ++++++++++-----------
 arch/arm/boot/dts/exynos4210-pinctrl.dtsi       |  32 +++----
 arch/arm/boot/dts/exynos4210.dtsi               |  40 ++++-----
 arch/arm/boot/dts/exynos4415-pinctrl.dtsi       |  32 +++----
 arch/arm/boot/dts/exynos4415.dtsi               | 108 ++++++++++++-----------
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi       |  32 +++----
 arch/arm/boot/dts/exynos4x12.dtsi               |  60 ++++++-------
 arch/arm/boot/dts/exynos5.dtsi                  |   4 +-
 arch/arm/boot/dts/exynos5250.dtsi               |  76 ++++++++--------
 arch/arm/boot/dts/exynos5260.dtsi               |  50 ++++++-----
 arch/arm/boot/dts/exynos5410.dtsi               |  16 ++--
 arch/arm/boot/dts/exynos5440.dtsi               |  80 ++++++++---------
 arch/arm/boot/dts/exynos54xx.dtsi               |  18 ++--
 arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi |  32 +++----
 arch/arm64/boot/dts/exynos/exynos7.dtsi         |  70 +++++++--------
 17 files changed, 452 insertions(+), 441 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 1/7] arm64: dts: exynos: Use human-friendly symbols for interrupt properties in exynos7
  2016-09-16 21:41 [PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties Krzysztof Kozlowski
@ 2016-09-16 21:41 ` Krzysztof Kozlowski
  2016-09-16 21:41 ` [PATCH 2/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250 Krzysztof Kozlowski
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 21:41 UTC (permalink / raw)
  To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
	Catalin Marinas, Will Deacon, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 32 +++++------
 arch/arm64/boot/dts/exynos/exynos7.dtsi         | 70 ++++++++++++-------------
 2 files changed, 51 insertions(+), 51 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 20f10e0f7c77..82321984e1fb 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -20,14 +20,14 @@
 		interrupt-controller;
 		interrupt-parent = <&gic>;
 		#interrupt-cells = <2>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 5 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 6 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	gpa1: gpa1 {
@@ -37,14 +37,14 @@
 		interrupt-controller;
 		interrupt-parent = <&gic>;
 		#interrupt-cells = <2>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 10 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 11 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	gpa2: gpa2 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 0a80dabfbe95..4b5a1eadffb5 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -106,7 +106,7 @@
 			pdma0: pdma@10E10000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x10E10000 0x1000>;
-				interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock_fsys0 ACLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -117,7 +117,7 @@
 			pdma1: pdma@10EB0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x10EB0000 0x1000>;
-				interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock_fsys0 ACLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -220,7 +220,7 @@
 		serial_0: serial@13630000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
-			interrupts = <0 440 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
 				 <&clock_peric0 SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -230,7 +230,7 @@
 		serial_1: serial@14c20000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
-			interrupts = <0 456 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
 				 <&clock_peric1 SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -240,7 +240,7 @@
 		serial_2: serial@14c30000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
-			interrupts = <0 457 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
 				 <&clock_peric1 SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -250,7 +250,7 @@
 		serial_3: serial@14c40000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
-			interrupts = <0 458 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
 				 <&clock_peric1 SCLK_UART3>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -264,62 +264,62 @@
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos7-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_bus0: pinctrl@13470000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x13470000 0x1000>;
-			interrupts = <0 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_nfc: pinctrl@14cd0000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14cd0000 0x1000>;
-			interrupts = <0 473 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_touch: pinctrl@14ce0000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14ce0000 0x1000>;
-			interrupts = <0 474 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_ff: pinctrl@14c90000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14c90000 0x1000>;
-			interrupts = <0 475 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_ese: pinctrl@14ca0000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14ca0000 0x1000>;
-			interrupts = <0 476 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_fsys0: pinctrl@10e60000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x10e60000 0x1000>;
-			interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_fsys1: pinctrl@15690000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x15690000 0x1000>;
-			interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_bus1: pinctrl@14870000 {
 			compatible = "samsung,exynos7-pinctrl";
 			reg = <0x14870000 0x1000>;
-			interrupts = <0 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		hsi2c_0: hsi2c@13640000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13640000 0x1000>;
-			interrupts = <0 441 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -332,7 +332,7 @@
 		hsi2c_1: hsi2c@13650000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13650000 0x1000>;
-			interrupts = <0 442 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -345,7 +345,7 @@
 		hsi2c_2: hsi2c@14e60000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
-			interrupts = <0 459 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -358,7 +358,7 @@
 		hsi2c_3: hsi2c@14e70000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
-			interrupts = <0 460 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -371,7 +371,7 @@
 		hsi2c_4: hsi2c@13660000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13660000 0x1000>;
-			interrupts = <0 443 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -384,7 +384,7 @@
 		hsi2c_5: hsi2c@13670000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13670000 0x1000>;
-			interrupts = <0 444 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -397,7 +397,7 @@
 		hsi2c_6: hsi2c@14e00000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e00000 0x1000>;
-			interrupts = <0 461 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -410,7 +410,7 @@
 		hsi2c_7: hsi2c@13e10000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13e10000 0x1000>;
-			interrupts = <0 462 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -423,7 +423,7 @@
 		hsi2c_8: hsi2c@14e20000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e20000 0x1000>;
-			interrupts = <0 463 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -436,7 +436,7 @@
 		hsi2c_9: hsi2c@13680000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13680000 0x1000>;
-			interrupts = <0 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -449,7 +449,7 @@
 		hsi2c_10: hsi2c@13690000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13690000 0x1000>;
-			interrupts = <0 446 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -462,7 +462,7 @@
 		hsi2c_11: hsi2c@136a0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x136a0000 0x1000>;
-			interrupts = <0 447 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-names = "default";
@@ -499,8 +499,8 @@
 		rtc: rtc@10590000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
-			interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 356 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_ccore PCLK_RTC>;
 			clock-names = "rtc";
 			status = "disabled";
@@ -509,7 +509,7 @@
 		watchdog: watchdog@101d0000 {
 			compatible = "samsung,exynos7-wdt";
 			reg = <0x101d0000 0x100>;
-			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peris PCLK_WDT>;
 			clock-names = "watchdog";
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -518,7 +518,7 @@
 
 		mmc_0: mmc@15740000 {
 			compatible = "samsung,exynos7-dw-mshc-smu";
-			interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x15740000 0x2000>;
@@ -531,7 +531,7 @@
 
 		mmc_1: mmc@15750000 {
 			compatible = "samsung,exynos7-dw-mshc";
-			interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x15750000 0x2000>;
@@ -544,7 +544,7 @@
 
 		mmc_2: mmc@15560000 {
 			compatible = "samsung,exynos7-dw-mshc-smu";
-			interrupts = <0 216 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x15560000 0x2000>;
@@ -558,7 +558,7 @@
 		adc: adc@13620000 {
 			compatible = "samsung,exynos7-adc";
 			reg = <0x13620000 0x100>;
-			interrupts = <0 448 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_ADCIF>;
 			clock-names = "adc";
 			#io-channel-cells = <1>;
@@ -578,7 +578,7 @@
 		tmuctrl_0: tmu@10060000 {
 			compatible = "samsung,exynos7-tmu";
 			reg = <0x10060000 0x200>;
-			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peris PCLK_TMU>,
 				 <&clock_peris SCLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 2/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250
  2016-09-16 21:41 [PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties Krzysztof Kozlowski
  2016-09-16 21:41 ` [PATCH 1/7] arm64: dts: exynos: Use human-friendly symbols for interrupt properties in exynos7 Krzysztof Kozlowski
@ 2016-09-16 21:41 ` Krzysztof Kozlowski
       [not found] ` <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 21:41 UTC (permalink / raw)
  To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
	Catalin Marinas, Will Deacon, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos3250-pinctrl.dtsi |  32 ++++-----
 arch/arm/boot/dts/exynos3250.dtsi         | 112 +++++++++++++++---------------
 2 files changed, 73 insertions(+), 71 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 9ee16ab30608..a5b65ed12d61 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -374,14 +374,14 @@
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
@@ -391,14 +391,14 @@
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 9703d81d1eb3..ba17ee1eb749 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -20,6 +20,7 @@
 #include "exynos4-cpu-thermal.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -212,8 +213,8 @@
 		rtc: rtc@10070000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
-			interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&pmu_system_controller>;
 			status = "disabled";
 		};
@@ -221,7 +222,7 @@
 		tmu: tmu@100C0000 {
 			compatible = "samsung,exynos3250-tmu";
 			reg = <0x100C0000 0x100>;
-			interrupts = <0 216 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -236,20 +237,21 @@
 			      <0x10482000 0x1000>,
 			      <0x10484000 0x2000>,
 			      <0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		mct@10050000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
-			interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 221 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 226 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 227 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 228 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 		};
@@ -257,24 +259,24 @@
 		pinctrl_1: pinctrl@11000000 {
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_0: pinctrl@11400000 {
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		jpeg: codec@11830000 {
 			compatible = "samsung,exynos3250-jpeg";
 			reg = <0x11830000 0x1000>;
-			interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
 			clock-names = "jpeg", "sclk";
 			power-domains = <&pd_cam>;
@@ -288,8 +290,8 @@
 		sysmmu_jpeg: sysmmu@11A60000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11a60000 0x1000>;
-			interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
 			power-domains = <&pd_cam>;
@@ -300,9 +302,9 @@
 			compatible = "samsung,exynos3250-fimd";
 			reg = <0x11c00000 0x30000>;
 			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
 			power-domains = <&pd_lcd0>;
@@ -314,7 +316,7 @@
 		dsi_0: dsi@11C80000 {
 			compatible = "samsung,exynos3250-mipi-dsi";
 			reg = <0x11C80000 0x10000>;
-			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -329,8 +331,8 @@
 		sysmmu_fimd0: sysmmu@11E20000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11e20000 0x1000>;
-			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
 			power-domains = <&pd_lcd0>;
@@ -340,7 +342,7 @@
 		hsotg: hsotg@12480000 {
 			compatible = "snps,dwc2";
 			reg = <0x12480000 0x20000>;
-			interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_USBOTG>;
 			clock-names = "otg";
 			phys = <&exynos_usbphy 0>;
@@ -351,7 +353,7 @@
 		mshc_0: mshc@12510000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -363,7 +365,7 @@
 		mshc_1: mshc@12520000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -375,7 +377,7 @@
 		mshc_2: mshc@12530000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12530000 0x1000>;
-			interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -403,7 +405,7 @@
 			pdma0: pdma@12680000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cmu CLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -414,7 +416,7 @@
 			pdma1: pdma@12690000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cmu CLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -427,7 +429,7 @@
 			compatible = "samsung,exynos3250-adc",
 				     "samsung,exynos-adc-v2";
 			reg = <0x126C0000 0x100>;
-			interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
 			#io-channel-cells = <1>;
@@ -439,7 +441,7 @@
 		mfc: codec@13400000 {
 			compatible = "samsung,mfc-v7";
 			reg = <0x13400000 0x10000>;
-			interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "mfc", "sclk_mfc";
 			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
 			power-domains = <&pd_mfc>;
@@ -449,8 +451,8 @@
 		sysmmu_mfc: sysmmu@13620000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x13620000 0x1000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
 			power-domains = <&pd_mfc>;
@@ -460,7 +462,7 @@
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13800000 0x100>;
-			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -471,7 +473,7 @@
 		serial_1: serial@13810000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13810000 0x100>;
-			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -482,7 +484,7 @@
 		serial_2: serial@13820000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13820000 0x100>;
-			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -495,7 +497,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
-			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C0>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -508,7 +510,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
-			interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C1>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -521,7 +523,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
-			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C2>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -534,7 +536,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
-			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C3>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -547,7 +549,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -560,7 +562,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -573,7 +575,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -586,7 +588,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -597,7 +599,7 @@
 		spi_0: spi@13920000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13920000 0x100>;
-			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -613,7 +615,7 @@
 		spi_1: spi@13930000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13930000 0x100>;
-			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 7>, <&pdma1 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -629,7 +631,7 @@
 		i2s2: i2s@13970000 {
 			compatible = "samsung,s3c6410-i2s";
 			reg = <0x13970000 0x100>;
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
 			clock-names = "iis", "i2s_opclk0";
 			dmas = <&pdma0 14>, <&pdma0 13>;
@@ -642,19 +644,19 @@
 		pwm: pwm@139D0000 {
 			compatible = "samsung,exynos4210-pwm";
 			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
 		pmu {
 			compatible = "arm,cortex-a7-pmu";
-			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		ppmu_dmc0: ppmu_dmc0@106a0000 {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

[parent not found: <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

* [PATCH 3/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4
       [not found] ` <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
@ 2016-09-16 21:41   ` Krzysztof Kozlowski
  2016-09-16 21:41   ` [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 Krzysztof Kozlowski
  2016-09-16 21:42   ` [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415 Krzysztof Kozlowski
  2 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 21:41 UTC (permalink / raw)
  To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
	Catalin Marinas, Will Deacon, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability

Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/exynos4.dtsi            | 99 ++++++++++++++++---------------
 arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 32 +++++-----
 arch/arm/boot/dts/exynos4210.dtsi         | 40 ++++++-------
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 32 +++++-----
 arch/arm/boot/dts/exynos4x12.dtsi         | 60 +++++++++----------
 5 files changed, 132 insertions(+), 131 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e6f4da7f0038..3cbfc14b6b02 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,6 +21,7 @@
 
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos-syscon-restart.dtsi"
 
@@ -169,7 +170,7 @@
 	dsi_0: dsi@11C80000 {
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_lcd0>;
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
@@ -192,7 +193,7 @@
 		fimc_0: fimc@11800000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
-			interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -204,7 +205,7 @@
 		fimc_1: fimc@11810000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11810000 0x1000>;
-			interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -216,7 +217,7 @@
 		fimc_2: fimc@11820000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11820000 0x1000>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -228,7 +229,7 @@
 		fimc_3: fimc@11830000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11830000 0x1000>;
-			interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
@@ -240,7 +241,7 @@
 		csis_0: csis@11880000 {
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11880000 0x4000>;
-			interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
@@ -255,7 +256,7 @@
 		csis_1: csis@11890000 {
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11890000 0x4000>;
-			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
@@ -271,7 +272,7 @@
 	watchdog: watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
-		interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
 		status = "disabled";
@@ -281,8 +282,8 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupt-parent = <&pmu_system_controller>;
-		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
@@ -291,7 +292,7 @@
 	keypad: keypad@100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_KEYIF>;
 		clock-names = "keypad";
 		status = "disabled";
@@ -300,7 +301,7 @@
 	sdhci_0: sdhci@12510000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -309,7 +310,7 @@
 	sdhci_1: sdhci@12520000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -318,7 +319,7 @@
 	sdhci_2: sdhci@12530000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -327,7 +328,7 @@
 	sdhci_3: sdhci@12540000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
-		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
@@ -346,7 +347,7 @@
 	hsotg: hsotg@12480000 {
 		compatible = "samsung,s3c6400-hsotg";
 		reg = <0x12480000 0x20000>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_DEVICE>;
 		clock-names = "otg";
 		phys = <&exynos_usbphy 0>;
@@ -357,7 +358,7 @@
 	ehci: ehci@12580000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12580000 0x100>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
@@ -383,7 +384,7 @@
 	ohci: ohci@12590000 {
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12590000 0x100>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
@@ -425,7 +426,7 @@
 	mfc: codec@13400000 {
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
-		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
 		clock-names = "mfc", "sclk_mfc";
@@ -436,7 +437,7 @@
 	serial_0: serial@13800000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
-		interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma0 15>, <&pdma0 16>;
@@ -447,7 +448,7 @@
 	serial_1: serial@13810000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
-		interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma1 15>, <&pdma1 16>;
@@ -458,7 +459,7 @@
 	serial_2: serial@13820000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
-		interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma0 17>, <&pdma0 18>;
@@ -469,7 +470,7 @@
 	serial_3: serial@13830000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
-		interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 		dmas = <&pdma1 17>, <&pdma1 18>;
@@ -482,7 +483,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
-		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -495,7 +496,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
-		interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -508,7 +509,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
-		interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -521,7 +522,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
-		interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -534,7 +535,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -547,7 +548,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -560,7 +561,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -573,7 +574,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
@@ -586,7 +587,7 @@
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-hdmiphy-i2c";
 		reg = <0x138E0000 0x100>;
-		interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_I2C_HDMI>;
 		clock-names = "i2c";
 		status = "disabled";
@@ -600,7 +601,7 @@
 	spi_0: spi@13920000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
-		interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma0 7>, <&pdma0 6>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -615,7 +616,7 @@
 	spi_1: spi@13930000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13930000 0x100>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma1 7>, <&pdma1 6>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -630,7 +631,7 @@
 	spi_2: spi@13940000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13940000 0x100>;
-		interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		dmas = <&pdma0 9>, <&pdma0 8>;
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
@@ -645,11 +646,11 @@
 	pwm: pwm@139D0000 {
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
-		interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
 		#pwm-cells = <3>;
@@ -666,7 +667,7 @@
 		pdma0: pdma@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -677,7 +678,7 @@
 		pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -688,7 +689,7 @@
 		mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -718,7 +719,7 @@
 	jpeg_codec: jpeg-codec@11840000 {
 		compatible = "samsung,exynos4210-jpeg";
 		reg = <0x11840000 0x1000>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_JPEG>;
 		clock-names = "jpeg";
 		power-domains = <&pd_cam>;
@@ -728,7 +729,7 @@
 	rotator: rotator@12810000 {
 		compatible = "samsung,exynos4210-rotator";
 		reg = <0x12810000 0x64>;
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_ROTATOR>;
 		clock-names = "rotator";
 		iommus = <&sysmmu_rotator>;
@@ -737,7 +738,7 @@
 	hdmi: hdmi@12D00000 {
 		compatible = "samsung,exynos4210-hdmi";
 		reg = <0x12D00000 0x70000>;
-		interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
 			"mout_hdmi";
 		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
@@ -752,7 +753,7 @@
 	hdmicec: cec@100B0000 {
 		compatible = "samsung,s5p-cec";
 		reg = <0x100B0000 0x200>;
-		interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_HDMI_CEC>;
 		clock-names = "hdmicec";
 		samsung,syscon-phandle = <&pmu_system_controller>;
@@ -763,7 +764,7 @@
 
 	mixer: mixer@12C10000 {
 		compatible = "samsung,exynos4210-mixer";
-		interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
 		power-domains = <&pd_tv>;
 		iommus = <&sysmmu_tv>;
@@ -990,7 +991,7 @@
 	sss: sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
 		reg = <0x10830000 0x300>;
-		interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
 	};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 152f324f44c7..1857c7469c46 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -535,14 +535,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 17 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 22 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
@@ -552,14 +552,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 25 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 26 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 27 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 28 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 29 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 736ab8587ab0..7f3a18c8f60f 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -127,18 +127,18 @@
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
 		wakup_eint: wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
@@ -182,7 +182,7 @@
 	g2d: g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
-		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		power-domains = <&pd_lcd0>;
@@ -424,22 +424,22 @@
 
 &combiner {
 	samsung,combiner-nr = <16>;
-	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 15 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index d579accc95db..f74e74e3263e 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -579,14 +579,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 17 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 22 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
@@ -596,14 +596,14 @@
 
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 25 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 26 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 27 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 28 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 29 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 		};
 
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 2f52b685daf9..505f047e81c6 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -112,7 +112,7 @@
 	g2d: g2d@10800000 {
 		compatible = "samsung,exynos4212-g2d";
 		reg = <0x10800000 0x1000>;
-		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		iommus = <&sysmmu_g2d>;
@@ -127,7 +127,7 @@
 		fimc_lite_0: fimc-lite@12390000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x12390000 0x1000>;
-			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
@@ -138,7 +138,7 @@
 		fimc_lite_1: fimc-lite@123A0000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x123A0000 0x1000>;
-			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
@@ -149,8 +149,8 @@
 		fimc_is: fimc-is@12000000 {
 			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
 			reg = <0x12000000 0x260000>;
-			interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>,
 				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
@@ -201,7 +201,7 @@
 	mshc_0: mmc@12550000 {
 		compatible = "samsung,exynos4412-dw-mshc";
 		reg = <0x12550000 0x1000>;
-		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		fifo-depth = <0x80>;
@@ -462,26 +462,26 @@
 };
 
 &combiner {
-	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 107 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 108 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 48 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 42 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &exynos_usbphy {
@@ -545,18 +545,18 @@
 &pinctrl_0 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x11400000 0x1000>;
-	interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &pinctrl_1 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x11000000 0x1000>;
-	interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
 	wakup_eint: wakeup-interrupt-controller {
 		compatible = "samsung,exynos4210-wakeup-eint";
 		interrupt-parent = <&gic>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
 
@@ -570,7 +570,7 @@
 &pinctrl_3 {
 	compatible = "samsung,exynos4x12-pinctrl";
 	reg = <0x106E0000 0x1000>;
-	interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &pmu_system_controller {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5
       [not found] ` <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
  2016-09-16 21:41   ` [PATCH 3/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4 Krzysztof Kozlowski
@ 2016-09-16 21:41   ` Krzysztof Kozlowski
  2016-09-18 15:20     ` Javier Martinez Canillas
  2016-09-16 21:42   ` [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415 Krzysztof Kozlowski
  2 siblings, 1 reply; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 21:41 UTC (permalink / raw)
  To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
	Catalin Marinas, Will Deacon, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability

Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/exynos5.dtsi    |  4 ++-
 arch/arm/boot/dts/exynos5250.dtsi | 76 +++++++++++++++++++--------------------
 arch/arm/boot/dts/exynos5410.dtsi | 16 ++++-----
 arch/arm/boot/dts/exynos54xx.dtsi | 18 +++++-----
 4 files changed, 58 insertions(+), 56 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index d9b1607db5ad..7fd870ee5093 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,6 +13,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos-syscon-restart.dtsi"
 
@@ -96,7 +97,8 @@
 				<0x10482000 0x1000>,
 				<0x10484000 0x2000>,
 				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		sysreg_system_controller: syscon@10050000 {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 4e00c0d06c67..b6d7444d8585 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -195,31 +195,31 @@
 		pinctrl_0: pinctrl@11400000 {
 			compatible = "samsung,exynos5250-pinctrl";
 			reg = <0x11400000 0x1000>;
-			interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakup_eint: wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@13400000 {
 			compatible = "samsung,exynos5250-pinctrl";
 			reg = <0x13400000 0x1000>;
-			interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@10d10000 {
 			compatible = "samsung,exynos5250-pinctrl";
 			reg = <0x10d10000 0x1000>;
-			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_3: pinctrl@03860000 {
 			compatible = "samsung,exynos5250-pinctrl";
 			reg = <0x03860000 0x1000>;
-			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10040000 {
@@ -236,7 +236,7 @@
 		watchdog@101D0000 {
 			compatible = "samsung,exynos5250-wdt";
 			reg = <0x101D0000 0x100>;
-			interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_WDT>;
 			clock-names = "watchdog";
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
 		g2d@10850000 {
 			compatible = "samsung,exynos5250-g2d";
 			reg = <0x10850000 0x1000>;
-			interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_G2D>;
 			clock-names = "fimg2d";
 			iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
 		mfc: codec@11000000 {
 			compatible = "samsung,mfc-v6";
 			reg = <0x11000000 0x10000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_mfc>;
 			clocks = <&clock CLK_MFC>;
 			clock-names = "mfc";
@@ -265,7 +265,7 @@
 		rotator: rotator@11C00000 {
 			compatible = "samsung,exynos5250-rotator";
 			reg = <0x11C00000 0x64>;
-			interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
 			iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
 		tmu: tmu@10060000 {
 			compatible = "samsung,exynos5250-tmu";
 			reg = <0x10060000 0x100>;
-			interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
 			#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
 			compatible = "snps,dwc-ahci";
 			samsung,sata-freq = <66>;
 			reg = <0x122F0000 0x1ff>;
-			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
 			clock-names = "sata", "sclk_sata";
 			phys = <&sata_phy>;
@@ -306,7 +306,7 @@
 		i2c_4: i2c@12CA0000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12CA0000 0x100>;
-			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
 		i2c_5: i2c@12CB0000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12CB0000 0x100>;
-			interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
 		i2c_6: i2c@12CC0000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12CC0000 0x100>;
-			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
 		i2c_7: i2c@12CD0000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x12CD0000 0x100>;
-			interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
 		i2c_8: i2c@12CE0000 {
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
 			reg = <0x12CE0000 0x1000>;
-			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
 			compatible = "samsung,exynos4210-spi";
 			status = "disabled";
 			reg = <0x12d20000 0x100>;
-			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 5
 				&pdma0 4>;
 			dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
 			compatible = "samsung,exynos4210-spi";
 			status = "disabled";
 			reg = <0x12d30000 0x100>;
-			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 5
 				&pdma1 4>;
 			dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
 			compatible = "samsung,exynos4210-spi";
 			status = "disabled";
 			reg = <0x12d40000 0x100>;
-			interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 7
 				&pdma0 6>;
 			dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
 
 		mmc_0: mmc@12200000 {
 			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
 
 		mmc_1: mmc@12210000 {
 			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
 
 		mmc_2: mmc@12220000 {
 			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
 		mmc_3: mmc@12230000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12230000 0x1000>;
-			interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
 			usbdrd_dwc3: dwc3@12000000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x12000000 0x10000>;
-				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -544,7 +544,7 @@
 		ehci: usb@12110000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0x12110000 0x100>;
-			interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&clock CLK_USB2>;
 			clock-names = "usbhost";
@@ -559,7 +559,7 @@
 		ohci: usb@12120000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0x12120000 0x100>;
-			interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&clock CLK_USB2>;
 			clock-names = "usbhost";
@@ -591,7 +591,7 @@
 			pdma0: pdma@121A0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x121A0000 0x1000>;
-				interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -602,7 +602,7 @@
 			pdma1: pdma@121B0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x121B0000 0x1000>;
-				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -613,7 +613,7 @@
 			mdma0: mdma@10800000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x10800000 0x1000>;
-				interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_MDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -624,7 +624,7 @@
 			mdma1: mdma@11C10000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x11C10000 0x1000>;
-				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_MDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -636,7 +636,7 @@
 		gsc_0:  gsc@13e00000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e00000 0x1000>;
-			interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL0>;
 			clock-names = "gscl";
@@ -646,7 +646,7 @@
 		gsc_1:  gsc@13e10000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e10000 0x1000>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL1>;
 			clock-names = "gscl";
@@ -656,7 +656,7 @@
 		gsc_2:  gsc@13e20000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e20000 0x1000>;
-			interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL2>;
 			clock-names = "gscl";
@@ -666,7 +666,7 @@
 		gsc_3:  gsc@13e30000 {
 			compatible = "samsung,exynos5-gsc";
 			reg = <0x13e30000 0x1000>;
-			interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_gsc>;
 			clocks = <&clock CLK_GSCL3>;
 			clock-names = "gscl";
@@ -677,7 +677,7 @@
 			compatible = "samsung,exynos4212-hdmi";
 			reg = <0x14530000 0x70000>;
 			power-domains = <&pd_disp1>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
 				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
 				 <&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
 			compatible = "samsung,exynos5250-mixer";
 			reg = <0x14450000 0x10000>;
 			power-domains = <&pd_disp1>;
-			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
 				 <&clock CLK_SCLK_HDMI>;
 			clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
 		adc: adc@12D10000 {
 			compatible = "samsung,exynos-adc-v1";
 			reg = <0x12D10000 0x100>;
-			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ADC>;
 			clock-names = "adc";
 			#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
 		sss@10830000 {
 			compatible = "samsung,exynos4210-secss";
 			reg = <0x10830000 0x300>;
-			interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_SSS>;
 			clock-names = "secss";
 		};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index dae5715b41b9..2501249d97aa 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -121,7 +121,7 @@
 		mmc_0: mmc@12200000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12200000 0x1000>;
-			interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -133,7 +133,7 @@
 		mmc_1: mmc@12210000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12210000 0x1000>;
-			interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -145,7 +145,7 @@
 		mmc_2: mmc@12220000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12220000 0x1000>;
-			interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -157,31 +157,31 @@
 		pinctrl_0: pinctrl@13400000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x13400000 0x1000>;
-			interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@14000000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x14000000 0x1000>;
-			interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@10d10000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x10d10000 0x1000>;
-			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_3: pinctrl@03860000 {
 			compatible = "samsung,exynos5410-pinctrl";
 			reg = <0x03860000 0x1000>;
-			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 8640b01f1c94..0389e8a10d0b 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -76,20 +76,20 @@
 		watchdog: watchdog@101d0000 {
 			compatible = "samsung,exynos5420-wdt";
 			reg = <0x101d0000 0x100>;
-			interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		sss: sss@10830000 {
 			compatible = "samsung,exynos4210-secss";
 			reg = <0x10830000 0x300>;
-			interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		/* i2c_0-3 are defined in exynos5.dtsi */
 		hsi2c_4: i2c@12ca0000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12ca0000 0x1000>;
-			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -98,7 +98,7 @@
 		hsi2c_5: i2c@12cb0000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12cb0000 0x1000>;
-			interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -107,7 +107,7 @@
 		hsi2c_6: i2c@12cc0000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12cc0000 0x1000>;
-			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -116,7 +116,7 @@
 		hsi2c_7: i2c@12cd0000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12cd0000 0x1000>;
-			interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -131,7 +131,7 @@
 			usbdrd_dwc3_0: dwc3@12000000 {
 				compatible = "snps,dwc3";
 				reg = <0x12000000 0x10000>;
-				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -166,7 +166,7 @@
 		usbhost2: usb@12110000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0x12110000 0x100>;
-			interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -179,7 +179,7 @@
 		usbhost1: usb@12120000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0x12120000 0x100>;
-			interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5
  2016-09-16 21:41   ` [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 Krzysztof Kozlowski
@ 2016-09-18 15:20     ` Javier Martinez Canillas
  0 siblings, 0 replies; 9+ messages in thread
From: Javier Martinez Canillas @ 2016-09-18 15:20 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Kukjin Kim, Catalin Marinas, Will Deacon,
	devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel

Hello Krzysztof,

On 09/16/2016 05:41 PM, Krzysztof Kozlowski wrote:
> Replace hard-coded values of type of GIC interrupt and its flags with
> respective macros from header to increase code readability
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---

On an Exynos5800 Peach Pi Chromebook and an Exynos5422 Odroid XU4 board:

Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415
       [not found] ` <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
  2016-09-16 21:41   ` [PATCH 3/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4 Krzysztof Kozlowski
  2016-09-16 21:41   ` [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 Krzysztof Kozlowski
@ 2016-09-16 21:42   ` Krzysztof Kozlowski
  2 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 21:42 UTC (permalink / raw)
  To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
	Catalin Marinas, Will Deacon, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability

Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/exynos4415-pinctrl.dtsi |  32 ++++-----
 arch/arm/boot/dts/exynos4415.dtsi         | 108 +++++++++++++++---------------
 2 files changed, 71 insertions(+), 69 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index 4863147be39a..f8d246cad22c 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -358,14 +358,14 @@
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
@@ -375,14 +375,14 @@
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 2ad6b6f9a37b..8d887ac380ab 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -18,6 +18,7 @@
 
 #include <dt-bindings/clock/exynos4415.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -106,7 +107,7 @@
 		pinctrl_2: pinctrl@03860000 {
 			compatible = "samsung,exynos4415-pinctrl";
 			reg = <0x03860000 0x1000>;
-			interrupts = <0 242 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		chipid@10000000 {
@@ -181,21 +182,22 @@
 		rtc: rtc@10070000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
-			interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, <0 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		mct@10050000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
-			interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 221 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 226 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 227 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 228 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 		};
@@ -234,28 +236,28 @@
 		pinctrl_1: pinctrl@11000000 {
 			compatible = "samsung,exynos4415-pinctrl";
 			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_0: pinctrl@11400000 {
 			compatible = "samsung,exynos4415-pinctrl";
 			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		fimd: fimd@11C00000 {
 			compatible = "samsung,exynos4415-fimd";
 			reg = <0x11C00000 0x30000>;
 			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
 			samsung,power-domain = <&pd_lcd0>;
@@ -267,7 +269,7 @@
 		dsi_0: dsi@11C80000 {
 			compatible = "samsung,exynos4415-mipi-dsi";
 			reg = <0x11C80000 0x10000>;
-			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			samsung,power-domain = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -282,8 +284,8 @@
 		sysmmu_fimd0: sysmmu@11E20000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11e20000 0x1000>;
-			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
 			power-domains = <&pd_lcd0>;
@@ -293,7 +295,7 @@
 		hsotg: hsotg@12480000 {
 			compatible = "samsung,s3c6400-hsotg";
 			reg = <0x12480000 0x20000>;
-			interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_USBDEVICE>;
 			clock-names = "otg";
 			phys = <&exynos_usbphy 0>;
@@ -304,7 +306,7 @@
 		mshc_0: mshc@12510000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -316,7 +318,7 @@
 		mshc_1: mshc@12520000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -328,7 +330,7 @@
 		mshc_2: mshc@12530000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12530000 0x1000>;
-			interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -340,7 +342,7 @@
 		ehci: ehci@12580000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0x12580000 0x100>;
-			interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_USBHOST>;
 			clock-names = "usbhost";
 			status = "disabled";
@@ -366,7 +368,7 @@
 		ohci: ohci@12590000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0x12590000 0x100>;
-			interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_USBHOST>;
 			clock-names = "usbhost";
 			status = "disabled";
@@ -400,7 +402,7 @@
 			pdma0: pdma@12680000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cmu CLK_PDMA0>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -411,7 +413,7 @@
 			pdma1: pdma@12690000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cmu CLK_PDMA1>;
 				clock-names = "apb_pclk";
 				#dma-cells = <1>;
@@ -424,7 +426,7 @@
 			compatible = "samsung,exynos3250-adc",
 				     "samsung,exynos-adc-v2";
 			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
-			interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
 			#io-channel-cells = <1>;
@@ -435,7 +437,7 @@
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13800000 0x100>;
-			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -444,7 +446,7 @@
 		serial_1: serial@13810000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13810000 0x100>;
-			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -453,7 +455,7 @@
 		serial_2: serial@13820000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13820000 0x100>;
-			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -462,7 +464,7 @@
 		serial_3: serial@13830000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13830000 0x100>;
-			interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -473,7 +475,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
-			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C0>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -486,7 +488,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
-			interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C1>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -499,7 +501,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
-			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C2>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -512,7 +514,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
-			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C3>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -525,7 +527,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -538,7 +540,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -551,7 +553,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -564,7 +566,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -575,7 +577,7 @@
 		spi_0: spi@13920000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13920000 0x100>;
-			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -591,7 +593,7 @@
 		spi_1: spi@13930000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13930000 0x100>;
-			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 7>, <&pdma1 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -607,7 +609,7 @@
 		spi_2: spi@13940000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13940000 0x100>;
-			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 9>, <&pdma0 8>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -629,7 +631,7 @@
 		i2s0: i2s@3830000 {
 			compatible = "samsung,s5pv210-i2s";
 			reg = <0x03830000 0x100>;
-			interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_audss EXYNOS_I2S_BUS>,
 				<&clock_audss EXYNOS_SCLK_I2S>;
 			clock-names = "iis", "i2s_opclk0";
@@ -644,21 +646,21 @@
 		pwm: pwm@139D0000 {
 			compatible = "samsung,exynos4210-pwm";
 			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 };
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 6/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260
  2016-09-16 21:41 [PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties Krzysztof Kozlowski
                   ` (2 preceding siblings ...)
       [not found] ` <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
@ 2016-09-16 21:42 ` Krzysztof Kozlowski
  2016-09-16 21:42 ` [PATCH 7/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440 Krzysztof Kozlowski
  4 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 21:42 UTC (permalink / raw)
  To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
	Catalin Marinas, Will Deacon, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5260.dtsi | 50 ++++++++++++++++++++-------------------
 1 file changed, 26 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index b0848a3d3d88..5818718618b1 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,7 @@
 */
 
 #include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -169,7 +170,8 @@
 				<0x10482000 0x1000>,
 				<0x10484000 0x2000>,
 				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		chipid: chipid@10000000 {
@@ -182,18 +184,18 @@
 			reg = <0x100B0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
-			interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 128 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 129 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		cci: cci@10F00000 {
@@ -219,25 +221,25 @@
 		pinctrl_0: pinctrl@11600000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x11600000 0x1000>;
-			interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@12290000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x12290000 0x1000>;
-			interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_2: pinctrl@128B0000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x128B0000 0x1000>;
-			interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10D50000 {
@@ -248,7 +250,7 @@
 		uart0: serial@12C00000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C00000 0x100>;
-			interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -257,7 +259,7 @@
 		uart1: serial@12C10000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C10000 0x100>;
-			interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -266,7 +268,7 @@
 		uart2: serial@12C20000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C20000 0x100>;
-			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -275,7 +277,7 @@
 		uart3: serial@12860000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12860000 0x100>;
-			interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -284,7 +286,7 @@
 		mmc_0: mmc@12140000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12140000 0x2000>;
-			interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -296,7 +298,7 @@
 		mmc_1: mmc@12150000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12150000 0x2000>;
-			interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -308,7 +310,7 @@
 		mmc_2: mmc@12160000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12160000 0x2000>;
-			interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 7/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440
  2016-09-16 21:41 [PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties Krzysztof Kozlowski
                   ` (3 preceding siblings ...)
  2016-09-16 21:42 ` [PATCH 6/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260 Krzysztof Kozlowski
@ 2016-09-16 21:42 ` Krzysztof Kozlowski
  4 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 21:42 UTC (permalink / raw)
  To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
	Catalin Marinas, Will Deacon, devicetree, linux-arm-kernel,
	linux-samsung-soc, linux-kernel

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5440.dtsi | 80 ++++++++++++++++++++-------------------
 1 file changed, 41 insertions(+), 39 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 20f600225121..97c9f0e38526 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -10,6 +10,7 @@
 */
 
 #include <dt-bindings/clock/exynos5440.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -42,7 +43,8 @@
 			<0x2E2000 0x1000>,
 			<0x2E4000 0x2000>,
 			<0x2E6000 0x2000>;
-		interrupts = <1 9 0xf04>;
+		interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	cpus {
@@ -73,26 +75,26 @@
 
 	arm-pmu {
 		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <0 52 4>,
-			     <0 53 4>,
-			     <0 54 4>,
-			     <0 55 4>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	timer {
 		compatible = "arm,cortex-a15-timer",
 			     "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <50000000>;
 	};
 
 	cpufreq@160000 {
 		compatible = "samsung,exynos5440-cpufreq";
 		reg = <0x160000 0x1000>;
-		interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		operating-points = <
 				/* KHz	  uV */
 				1500000 1100000
@@ -109,7 +111,7 @@
 	serial_0: serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
-		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -117,7 +119,7 @@
 	serial_1: serial@C0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
-		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -125,7 +127,7 @@
 	spi_0: spi@D0000 {
 		compatible = "samsung,exynos5440-spi";
 		reg = <0xD0000 0x100>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,spi-src-clk = <0>;
@@ -137,14 +139,14 @@
 	pin_ctrl: pinctrl@E0000 {
 		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
-		interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 44 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		#gpio-cells = <2>;
@@ -169,7 +171,7 @@
 	i2c@F0000 {
 		compatible = "samsung,exynos5440-i2c";
 		reg = <0xF0000 0x1000>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock CLK_B_125>;
@@ -179,7 +181,7 @@
 	i2c@100000 {
 		compatible = "samsung,exynos5440-i2c";
 		reg = <0x100000 0x1000>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock CLK_B_125>;
@@ -189,7 +191,7 @@
 	watchdog@110000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
-		interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "watchdog";
 	};
@@ -198,7 +200,7 @@
 		compatible = "snps,dwmac-3.70a";
 		reg = <0x00230000 0x8000>;
 		interrupt-parent = <&gic>;
-		interrupts = <0 31 4>;
+		interrupts = <GIC_SPI 31 4>;
 		interrupt-names = "macirq";
 		phy-mode = "sgmii";
 		clocks = <&clock CLK_GMAC0>;
@@ -216,8 +218,8 @@
 	rtc@130000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
-		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "rtc";
 	};
@@ -225,7 +227,7 @@
 	tmuctrl_0: tmuctrl@160118 {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -234,7 +236,7 @@
 	tmuctrl_1: tmuctrl@16011C {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x16011C 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -243,7 +245,7 @@
 	tmuctrl_2: tmuctrl@160120 {
 		compatible = "samsung,exynos5440-tmu";
 		reg = <0x160120 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
 		#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -267,7 +269,7 @@
 	sata@210000 {
 		compatible = "snps,exynos5440-ahci";
 		reg = <0x210000 0x10000>;
-		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_SATA>;
 		clock-names = "sata";
 	};
@@ -275,7 +277,7 @@
 	ohci@220000 {
 		compatible = "samsung,exynos5440-ohci";
 		reg = <0x220000 0x1000>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
@@ -283,7 +285,7 @@
 	ehci@221000 {
 		compatible = "samsung,exynos5440-ehci";
 		reg = <0x221000 0x1000>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
@@ -293,9 +295,9 @@
 		reg = <0x290000 0x1000
 			0x270000 0x1000
 			0x271000 0x40>;
-		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 22 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
@@ -316,9 +318,9 @@
 		reg = <0x2a0000 0x1000
 			0x272000 0x1000
 			0x271040 0x40>;
-		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 25 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2016-09-18 15:20 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-16 21:41 [PATCH 0/7] ARM: dts: exynos Use human-friendly symbols for interrupt properties Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 1/7] arm64: dts: exynos: Use human-friendly symbols for interrupt properties in exynos7 Krzysztof Kozlowski
2016-09-16 21:41 ` [PATCH 2/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250 Krzysztof Kozlowski
     [not found] ` <1474062122-22720-1-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-09-16 21:41   ` [PATCH 3/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4 Krzysztof Kozlowski
2016-09-16 21:41   ` [PATCH 4/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 Krzysztof Kozlowski
2016-09-18 15:20     ` Javier Martinez Canillas
2016-09-16 21:42   ` [PATCH 5/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4415 Krzysztof Kozlowski
2016-09-16 21:42 ` [PATCH 6/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260 Krzysztof Kozlowski
2016-09-16 21:42 ` [PATCH 7/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440 Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).