[PATCH 2/3] arm: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

From: Jagan Teki <jagannadh.teki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>,
	Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Subject: [PATCH 2/3] arm: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Date: Sat, 17 Sep 2016 13:25:25 +0530	[thread overview]
Message-ID: <1474098926-5236-2-git-send-email-jagan@amarulasolutions.com> (raw)
In-Reply-To: <1474098926-5236-1-git-send-email-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

From: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>

Fixed code indent tabs in respetcive imx6qdl dtsi files.

Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
---
 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi        | 4 ++--
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi        | 2 +-
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 6 +++---
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi     | 2 +-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi       | 4 ++--
 arch/arm/boot/dts/imx6qdl.dtsi               | 6 +++---
 8 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index a7100f9..54aca3a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -153,9 +153,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &ecspi3 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8953eba..88e5cb3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -154,9 +154,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 6ac41c7..1753ab7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -144,9 +144,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 };
 
 &fec {
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 805e236..ee83161 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -291,7 +291,7 @@
 				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
 				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 			>;
-                };
+		};
 
 		pinctrl_wdog: wdoggrp {
 			fsl,pins = <
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e0280cac2..e9801a2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -427,10 +427,10 @@
 };
 
 &usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-        status = "disabled";
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e000e6f..8006467 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -283,7 +283,7 @@
 		VD-supply = <&reg_audio>;
 		VLS-supply = <&reg_audio>;
 		VLC-supply = <&reg_audio>;
-        };
+	};
 
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 8e9e0d9..55ef535 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -129,8 +129,8 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		red {
-		        gpios = <&gpio1 2 0>;
-		        default-state = "on";
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2..1bbd36f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -204,9 +204,9 @@
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

next prev parent reply	other threads:[~2016-09-17  7:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-17  7:55 [PATCH 1/3] arm: dts: imx6qdl: Fix "WARNING: please, no space before tabs" Jagan Teki
     [not found] ` <1474098926-5236-1-git-send-email-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2016-09-17  7:55   ` Jagan Teki [this message]
2016-09-17  7:55   ` [PATCH 3/3] arm: dts: imx6qdl-wandboard-revb: Fix "ERROR: trailing whitespace" Jagan Teki

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:a7100f9 dfblob:54aca3a dfblob:8953eba dfblob:88e5cb3
dfblob:6ac41c7 dfblob:1753ab7 dfblob:805e236 dfblob:ee83161
dfblob:e0280cac dfblob:e9801a2 dfblob:e000e6f dfblob:8006467
dfblob:8e9e0d9 dfblob:55ef535 dfblob:b13b0b2 dfblob:1bbd36f )
 OR (
bs:"[PATCH 2/3] arm: dts: imx6qdl: Fix "
bs:"ERROR: code indent should use tabs where possible" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1474098926-5236-2-git-send-email-jagan@amarulasolutions.com \
    --to=jagannadh.teki-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).