devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lawrence Yu <lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org>
To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
	wens-jdAy2FN1RRM@public.gmane.org,
	maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	bonbons-ud5FBsm0p/xEiooADzr8i9i2O/JbrIOy@public.gmane.org,
	Lawrence Yu <lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 1/1] power: axp20x_ac: Add support for ac power-supply on axp20x and axp22x pmics
Date: Sat, 17 Sep 2016 09:20:43 -0700	[thread overview]
Message-ID: <1474129243-10873-1-git-send-email-lyu@micile.com> (raw)

Add support for monitoring of ac power supply input.  axp22x is the same
as axp20x except it can not monitor voltage or current, only presence of
power.

This is mainly a copy of the existing axp20x_usb_power driver modified to
use the ac power supply registers instead of the usb registers.

axp20x tested on a generic A20 tablet.
axp22x tested on an a33 ga10h-v1.1 tablet.

Signed-off-by: Lawrence Yu <lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org>
---
 .../bindings/power_supply/axp20x_ac_power.txt      |  35 ++++
 arch/arm/boot/dts/axp209.dtsi                      |   5 +
 arch/arm/boot/dts/axp22x.dtsi                      |   5 +
 drivers/mfd/axp20x.c                               |  11 ++
 drivers/power/Makefile                             |   1 +
 drivers/power/axp20x_ac_power.c                    | 219 +++++++++++++++++++++
 6 files changed, 276 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt
 create mode 100644 drivers/power/axp20x_ac_power.c

diff --git a/Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt
new file mode 100644
index 0000000..d751cdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt
@@ -0,0 +1,35 @@
+AXP20x AC power supply
+
+Required Properties:
+-compatible: One of: "x-powers,axp202-ac-power-supply"
+                     "x-powers,axp221-ac-power-supply"
+
+This node is a subnode of the axp20x PMIC.
+
+Example:
+
+axp209: pmic@34 {
+	compatible = "x-powers,axp209";
+	reg = <0x34>;
+	interrupt-parent = <&nmi_intc>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		x-powers,dcdc-freq = <1500>;
+
+		vdd_cpu: dcdc2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-name = "vdd-cpu";
+		};
+
+		...
+	};
+
+	ac-power-supply: ac-power-supply {
+		compatible = "x-powers,axp202-ac-power-supply";
+	};
+};
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 675bb0f..54e23c6 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -97,6 +97,11 @@
 		};
 	};
 
+	ac_power_supply: ac_power_supply {
+		compatible = "x-powers,axp202-ac-power-supply";
+		status = "disabled";
+	};
+
 	usb_power_supply: usb_power_supply {
 		compatible = "x-powers,axp202-usb-power-supply";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
index 458b668..cdd5d4f 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -148,6 +148,11 @@
 		};
 	};
 
+	ac_power_supply: ac_power_supply {
+		compatible = "x-powers,axp221-ac-power-supply";
+		status = "disabled";
+	};
+
 	usb_power_supply: usb_power_supply {
 		compatible = "x-powers,axp221-usb-power-supply";
 		status = "disabled";
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index ba130be..450d1a0 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -162,6 +162,12 @@ static struct resource axp20x_ac_power_supply_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
 };
 
+static struct resource axp22x_ac_power_supply_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
+};
+
 static struct resource axp20x_pek_resources[] = {
 	{
 		.name	= "PEK_DBR",
@@ -595,6 +601,11 @@ static struct mfd_cell axp22x_cells[] = {
 	}, {
 		.name			= "axp20x-regulator",
 	}, {
+		.name		= "axp20x-ac-power-supply",
+		.of_compatible	= "x-powers,axp221-ac-power-supply",
+		.num_resources	= ARRAY_SIZE(axp22x_ac_power_supply_resources),
+		.resources	= axp22x_ac_power_supply_resources,
+	}, {
 		.name		= "axp20x-usb-power-supply",
 		.of_compatible	= "x-powers,axp221-usb-power-supply",
 		.num_resources	= ARRAY_SIZE(axp22x_usb_power_supply_resources),
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index e46b75d..295ec0f 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY)	+= generic-adc-battery.o
 
 obj-$(CONFIG_PDA_POWER)		+= pda_power.o
 obj-$(CONFIG_APM_POWER)		+= apm_power.o
+obj-$(CONFIG_AXP20X_POWER)	+= axp20x_ac_power.o
 obj-$(CONFIG_AXP20X_POWER)	+= axp20x_usb_power.o
 obj-$(CONFIG_MAX8925_POWER)	+= max8925_power.o
 obj-$(CONFIG_WM831X_BACKUP)	+= wm831x_backup.o
diff --git a/drivers/power/axp20x_ac_power.c b/drivers/power/axp20x_ac_power.c
new file mode 100644
index 0000000..13bb093
--- /dev/null
+++ b/drivers/power/axp20x_ac_power.c
@@ -0,0 +1,219 @@
+/*
+ * AXP20x PMIC AC power supply status driver
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
+ * Copyright (C) 2014 Bruno Prémont <bonbons-ud5FBsm0p/xEiooADzr8i9i2O/JbrIOy@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define DRVNAME "axp20x-ac-power-supply"
+
+#define AXP20X_PWR_STATUS_ACIN_PRESENT	BIT(7)
+#define AXP20X_PWR_STATUS_ACIN_USED	BIT(6)
+#define AXP20X_ADC_EN1_ACIN_CURR	BIT(4)
+#define AXP20X_ADC_EN1_ACIN_VOLT	BIT(5)
+
+struct axp20x_ac_power {
+	struct device_node *np;
+	struct regmap *regmap;
+	struct power_supply *supply;
+};
+
+static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
+{
+	struct axp20x_ac_power *power = devid;
+
+	power_supply_changed(power->supply);
+
+	return IRQ_HANDLED;
+}
+
+static int axp20x_ac_power_get_property(struct power_supply *psy,
+	enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
+	unsigned int input;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = axp20x_read_variable_width(power->regmap,
+					 AXP20X_ACIN_V_ADC_H, 12);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret * 1700; /* 1 step = 1.7 mV */
+		return 0;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = axp20x_read_variable_width(power->regmap,
+						 AXP20X_ACIN_I_ADC_H, 12);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret * 625; /* 1 step = 0.375 mA */
+		return 0;
+	default:
+		break;
+	}
+
+	/* All the properties below need the input-status reg value */
+	ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input);
+	if (ret)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(input & AXP20X_PWR_STATUS_ACIN_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = !!(input & AXP20X_PWR_STATUS_ACIN_USED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property axp20x_ac_power_properties[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static enum power_supply_property axp22x_ac_power_properties[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc axp20x_ac_power_desc = {
+	.name = "axp20x-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = axp20x_ac_power_properties,
+	.num_properties = ARRAY_SIZE(axp20x_ac_power_properties),
+	.get_property = axp20x_ac_power_get_property,
+};
+
+static const struct power_supply_desc axp22x_ac_power_desc = {
+	.name = "axp20x-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = axp22x_ac_power_properties,
+	.num_properties = ARRAY_SIZE(axp22x_ac_power_properties),
+	.get_property = axp20x_ac_power_get_property,
+};
+
+static int axp20x_ac_power_probe(struct platform_device *pdev)
+{
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {};
+	struct axp20x_ac_power *power;
+	static const char * const axp20x_irq_names[] = {
+		"ACIN_PLUGIN", "ACIN_REMOVAL", NULL };
+	static const char * const axp22x_irq_names[] = {
+		"ACIN_PLUGIN", "ACIN_REMOVAL", NULL };
+	static const char * const *irq_names;
+	const struct power_supply_desc *ac_power_desc;
+	int i, irq, ret;
+
+	if (!of_device_is_available(pdev->dev.of_node))
+		return -ENODEV;
+
+	if (!axp20x) {
+		dev_err(&pdev->dev, "Parent drvdata not set\n");
+		return -EINVAL;
+	}
+
+	power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
+	if (!power)
+		return -ENOMEM;
+
+	power->np = pdev->dev.of_node;
+	power->regmap = axp20x->regmap;
+
+	if (of_device_is_compatible(power->np,
+			"x-powers,axp202-ac-power-supply")) {
+
+		/* Enable acin voltage and current measurement */
+		ret = regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
+			AXP20X_ADC_EN1_ACIN_CURR | AXP20X_ADC_EN1_ACIN_VOLT,
+			AXP20X_ADC_EN1_ACIN_CURR | AXP20X_ADC_EN1_ACIN_VOLT);
+		if (ret)
+			return ret;
+
+		ac_power_desc = &axp20x_ac_power_desc;
+		irq_names = axp20x_irq_names;
+	} else if (of_device_is_compatible(power->np,
+			"x-powers,axp221-ac-power-supply")) {
+		ac_power_desc = &axp22x_ac_power_desc;
+		irq_names = axp22x_irq_names;
+	} else {
+		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
+			axp20x->variant);
+		return -EINVAL;
+	}
+
+	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.drv_data = power;
+
+	power->supply = devm_power_supply_register(&pdev->dev, ac_power_desc,
+						   &psy_cfg);
+	if (IS_ERR(power->supply))
+		return PTR_ERR(power->supply);
+
+	/* Request irqs after registering, as irqs may trigger immediately */
+	for (i = 0; irq_names[i]; i++) {
+		irq = platform_get_irq_byname(pdev, irq_names[i]);
+		if (irq < 0) {
+			dev_warn(&pdev->dev, "No IRQ for %s: %d\n",
+				 irq_names[i], irq);
+			continue;
+		}
+		irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
+		ret = devm_request_any_context_irq(&pdev->dev, irq,
+				axp20x_ac_power_irq, 0, DRVNAME, power);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n",
+				 irq_names[i], ret);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id axp20x_ac_power_match[] = {
+	{ .compatible = "x-powers,axp202-ac-power-supply" },
+	{ .compatible = "x-powers,axp221-ac-power-supply" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, axp20x_ac_power_match);
+
+static struct platform_driver axp20x_ac_power_driver = {
+	.probe = axp20x_ac_power_probe,
+	.driver = {
+		.name = DRVNAME,
+		.of_match_table = axp20x_ac_power_match,
+	},
+};
+
+module_platform_driver(axp20x_ac_power_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>");
+MODULE_DESCRIPTION("AXP20x PMIC AC power supply status driver");
+MODULE_LICENSE("GPL");
-- 
2.5.3

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

             reply	other threads:[~2016-09-17 16:20 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-17 16:20 Lawrence Yu [this message]
     [not found] ` <1474129243-10873-1-git-send-email-lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org>
2016-10-26  9:27   ` [PATCH 1/1] power: axp20x_ac: Add support for ac power-supply on axp20x and axp22x pmics Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1474129243-10873-1-git-send-email-lyu@micile.com \
    --to=lyu-u6idcovonm7qt0dzr+alfa@public.gmane.org \
    --cc=bonbons-ud5FBsm0p/xEiooADzr8i9i2O/JbrIOy@public.gmane.org \
    --cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).