[PATCH 1/3] watchdog: bindings: dw_wdt: add reset lines

[Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

Document the reset lines holding the watchdog core in reset.

Signed-off-by: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 Documentation/devicetree/bindings/watchdog/dw_wdt.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
index 08e16f684f2d..3bf386c72241 100644
--- a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
@@ -10,6 +10,9 @@ Required Properties:
 Optional Properties:
 
 - interrupts	: The interrupt used for the watchdog timeout warning.
+- resets	: phandle pointing to the system reset controller with
+		line index for the watchdog.
+- reset-names	: must be set to "dw-wdt".
 
 Example:
 
@@ -18,4 +21,6 @@ Example:
 		reg = <0xffd02000 0x1000>;
 		interrupts = <0 171 4>;
 		clocks = <&per_base_clk>;
+		resets = <&rst WDT0_RESET>;
+		reset-names = "dw-wdt";
 	};
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html