[PATCH v2 1/2] media: adv7604: fix bindings inconsistency for default-input

[Ulrich Hecht <ulrich.hecht+renesas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

The text states that default-input is an endpoint property, but in the
example it is a device property.

The default input is a property of the chip, not of a particular port, so
the example makes more sense.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
---
 Documentation/devicetree/bindings/media/i2c/adv7604.txt | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 8337f75..9cbd92e 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -34,6 +34,7 @@ The digital output port node must contain at least one endpoint.
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the device's reset pin.
+  - default-input: Select which input is selected after reset.
 
 Optional Endpoint Properties:
 
@@ -47,8 +48,6 @@ Optional Endpoint Properties:
   If none of hsync-active, vsync-active and pclk-sample is specified the
   endpoint will use embedded BT.656 synchronization.
 
-  - default-input: Select which input is selected after reset.
-
 Example:
 
 	hdmi_receiver@4c {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html