* [PATCH v2] arm: dts: zynq: Add MicroZed board support @ 2016-09-22 13:21 Jagan Teki 2016-09-22 20:59 ` Sören Brinkmann 0 siblings, 1 reply; 7+ messages in thread From: Jagan Teki @ 2016-09-22 13:21 UTC (permalink / raw) To: linux-arm-kernel Cc: devicetree, linux-kernel, Jagan Teki, Soren Brinkmann, Michal Simek From: Jagan Teki <jteki@openedev.com> Added basic dts support for MicroZed board. - UART - SDHCI - Ethernet Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jagan Teki <jteki@openedev.com> --- Changes for v2: - Add SDHCI - Add Ethernet arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++ 2 files changed, 96 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-microzed.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faacd52..4d7b858 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ wm8750-apc8750.dtb \ wm8850-w70v2.dtb dtb-$(CONFIG_ARCH_ZYNQ) += \ + zynq-microzed.dtb \ zynq-parallella.dtb \ zynq-zc702.dtb \ zynq-zc706.dtb \ diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts new file mode 100644 index 0000000..9e64496 --- /dev/null +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq MicroZED Development Board"; + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; +}; + +&pinctrl0 { + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; -- 2.7.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support 2016-09-22 13:21 [PATCH v2] arm: dts: zynq: Add MicroZed board support Jagan Teki @ 2016-09-22 20:59 ` Sören Brinkmann 2016-09-23 6:03 ` Michal Simek 0 siblings, 1 reply; 7+ messages in thread From: Sören Brinkmann @ 2016-09-22 20:59 UTC (permalink / raw) To: Jagan Teki Cc: Jagan Teki, devicetree, linux-kernel, linux-arm-kernel, Michal Simek On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote: > From: Jagan Teki <jteki@openedev.com> > > Added basic dts support for MicroZed board. > > - UART > - SDHCI > - Ethernet > > Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> > Cc: Michal Simek <michal.simek@xilinx.com> > Signed-off-by: Jagan Teki <jteki@openedev.com> > --- > Changes for v2: > - Add SDHCI > - Add Ethernet > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 96 insertions(+) > create mode 100644 arch/arm/boot/dts/zynq-microzed.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index faacd52..4d7b858 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ > wm8750-apc8750.dtb \ > wm8850-w70v2.dtb > dtb-$(CONFIG_ARCH_ZYNQ) += \ > + zynq-microzed.dtb \ > zynq-parallella.dtb \ > zynq-zc702.dtb \ > zynq-zc706.dtb \ > diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts > new file mode 100644 > index 0000000..9e64496 > --- /dev/null > +++ b/arch/arm/boot/dts/zynq-microzed.dts > @@ -0,0 +1,95 @@ > +/* > + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com> > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > +/dts-v1/; > +/include/ "zynq-7000.dtsi" > + > +/ { > + model = "Zynq MicroZED Development Board"; > + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; > + > + aliases { > + ethernet0 = &gem0; > + serial0 = &uart1; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x0 0x40000000>; > + }; > + > + chosen { > + bootargs = "earlycon"; > + stdout-path = "serial0:115200n8"; > + }; > + > + usb_phy0: phy0 { > + compatible = "usb-nop-xceiv"; > + #phy-cells = <0>; > + }; > +}; > + > +&clkc { > + ps-clk-frequency = <33333333>; > +}; > + > +&gem0 { > + status = "okay"; > + phy-mode = "rgmii-id"; > + phy-handle = <ðernet_phy>; > + > + ethernet_phy: ethernet-phy@0 { > + reg = <0>; > + }; > +}; > + > +&sdhci0 { > + status = "okay"; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&usb0 { > + status = "okay"; > + dr_mode = "host"; > + usb-phy = <&usb_phy0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb0_default>; > +}; > + > +&pinctrl0 { > + pinctrl_usb0_default: usb0-default { > + mux { > + groups = "usb0_0_grp"; > + function = "usb0"; > + }; > + > + conf { > + groups = "usb0_0_grp"; > + slew-rate = <0>; > + io-standard = <1>; > + }; > + > + conf-rx { > + pins = "MIO29", "MIO31", "MIO36"; > + bias-high-impedance; > + }; > + > + conf-tx { > + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", > + "MIO35", "MIO37", "MIO38", "MIO39"; > + bias-disable; > + }; > + }; > +}; I guess it's not strictly required, but shouldn't there be pinctrl descriptions for all devices? Sören _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support 2016-09-22 20:59 ` Sören Brinkmann @ 2016-09-23 6:03 ` Michal Simek [not found] ` <4a586da6-8d94-bfbe-ea0c-58b6f8573e7b-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> 0 siblings, 1 reply; 7+ messages in thread From: Michal Simek @ 2016-09-23 6:03 UTC (permalink / raw) To: Sören Brinkmann, Jagan Teki Cc: Jagan Teki, devicetree, linux-kernel, linux-arm-kernel, Michal Simek On 22.9.2016 22:59, Sören Brinkmann wrote: > On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote: >> From: Jagan Teki <jteki@openedev.com> >> >> Added basic dts support for MicroZed board. >> >> - UART >> - SDHCI >> - Ethernet >> >> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> >> Cc: Michal Simek <michal.simek@xilinx.com> >> Signed-off-by: Jagan Teki <jteki@openedev.com> >> --- >> Changes for v2: >> - Add SDHCI >> - Add Ethernet >> >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++ >> 2 files changed, 96 insertions(+) >> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index faacd52..4d7b858 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ >> wm8750-apc8750.dtb \ >> wm8850-w70v2.dtb >> dtb-$(CONFIG_ARCH_ZYNQ) += \ >> + zynq-microzed.dtb \ >> zynq-parallella.dtb \ >> zynq-zc702.dtb \ >> zynq-zc706.dtb \ >> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts >> new file mode 100644 >> index 0000000..9e64496 >> --- /dev/null >> +++ b/arch/arm/boot/dts/zynq-microzed.dts >> @@ -0,0 +1,95 @@ >> +/* >> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com> Did you created only yourself without copying part of this from others? There is dts in u-boot which I believe you are aware of. Thanks, Michal _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <4a586da6-8d94-bfbe-ea0c-58b6f8573e7b-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support [not found] ` <4a586da6-8d94-bfbe-ea0c-58b6f8573e7b-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> @ 2016-09-23 7:39 ` Jagan Teki 2016-09-23 8:37 ` Michal Simek 0 siblings, 1 reply; 7+ messages in thread From: Jagan Teki @ 2016-09-23 7:39 UTC (permalink / raw) To: Michal Simek Cc: Sören Brinkmann, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> wrote: > On 22.9.2016 22:59, Sören Brinkmann wrote: >> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote: >>> From: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org> >>> >>> Added basic dts support for MicroZed board. >>> >>> - UART >>> - SDHCI >>> - Ethernet >>> >>> Cc: Soren Brinkmann <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> >>> Cc: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> >>> Signed-off-by: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org> >>> --- >>> Changes for v2: >>> - Add SDHCI >>> - Add Ethernet >>> >>> arch/arm/boot/dts/Makefile | 1 + >>> arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++ >>> 2 files changed, 96 insertions(+) >>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts >>> >>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>> index faacd52..4d7b858 100644 >>> --- a/arch/arm/boot/dts/Makefile >>> +++ b/arch/arm/boot/dts/Makefile >>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ >>> wm8750-apc8750.dtb \ >>> wm8850-w70v2.dtb >>> dtb-$(CONFIG_ARCH_ZYNQ) += \ >>> + zynq-microzed.dtb \ >>> zynq-parallella.dtb \ >>> zynq-zc702.dtb \ >>> zynq-zc706.dtb \ >>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts >>> new file mode 100644 >>> index 0000000..9e64496 >>> --- /dev/null >>> +++ b/arch/arm/boot/dts/zynq-microzed.dts >>> @@ -0,0 +1,95 @@ >>> +/* >>> + * Copyright (C) 2015 Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org> > > > Did you created only yourself without copying part of this from others? > There is dts in u-boot which I believe you are aware of. I sent the initial one few months back so at that time, I was created and now I just added USB and Ethernet with the reference of zc702 board. thanks! -- Jagan. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support 2016-09-23 7:39 ` Jagan Teki @ 2016-09-23 8:37 ` Michal Simek 2016-09-23 8:42 ` Jagan Teki 0 siblings, 1 reply; 7+ messages in thread From: Michal Simek @ 2016-09-23 8:37 UTC (permalink / raw) To: Jagan Teki, Michal Simek Cc: devicetree, linux-arm-kernel@lists.infradead.org, Sören Brinkmann, linux-kernel@vger.kernel.org On 23.9.2016 09:39, Jagan Teki wrote: > On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote: >> On 22.9.2016 22:59, Sören Brinkmann wrote: >>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote: >>>> From: Jagan Teki <jteki@openedev.com> >>>> >>>> Added basic dts support for MicroZed board. >>>> >>>> - UART >>>> - SDHCI >>>> - Ethernet >>>> >>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> >>>> Cc: Michal Simek <michal.simek@xilinx.com> >>>> Signed-off-by: Jagan Teki <jteki@openedev.com> >>>> --- >>>> Changes for v2: >>>> - Add SDHCI >>>> - Add Ethernet >>>> >>>> arch/arm/boot/dts/Makefile | 1 + >>>> arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++ >>>> 2 files changed, 96 insertions(+) >>>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts >>>> >>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>> index faacd52..4d7b858 100644 >>>> --- a/arch/arm/boot/dts/Makefile >>>> +++ b/arch/arm/boot/dts/Makefile >>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ >>>> wm8750-apc8750.dtb \ >>>> wm8850-w70v2.dtb >>>> dtb-$(CONFIG_ARCH_ZYNQ) += \ >>>> + zynq-microzed.dtb \ >>>> zynq-parallella.dtb \ >>>> zynq-zc702.dtb \ >>>> zynq-zc706.dtb \ >>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts >>>> new file mode 100644 >>>> index 0000000..9e64496 >>>> --- /dev/null >>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts >>>> @@ -0,0 +1,95 @@ >>>> +/* >>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com> >> >> >> Did you created only yourself without copying part of this from others? >> There is dts in u-boot which I believe you are aware of. > > I sent the initial one few months back so at that time, I was created > and now I just added USB and Ethernet with the reference of zc702 > board. Can you send me a link to that post? I didn't find it. Anyway you should keep Xilinx copyright there. Thanks, Michal _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support 2016-09-23 8:37 ` Michal Simek @ 2016-09-23 8:42 ` Jagan Teki 2016-09-23 8:54 ` Michal Simek 0 siblings, 1 reply; 7+ messages in thread From: Jagan Teki @ 2016-09-23 8:42 UTC (permalink / raw) To: Michal Simek Cc: Sören Brinkmann, linux-arm-kernel@lists.infradead.org, devicetree, linux-kernel@vger.kernel.org On Fri, Sep 23, 2016 at 2:07 PM, Michal Simek <michal.simek@xilinx.com> wrote: > On 23.9.2016 09:39, Jagan Teki wrote: >> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote: >>> On 22.9.2016 22:59, Sören Brinkmann wrote: >>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote: >>>>> From: Jagan Teki <jteki@openedev.com> >>>>> >>>>> Added basic dts support for MicroZed board. >>>>> >>>>> - UART >>>>> - SDHCI >>>>> - Ethernet >>>>> >>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> >>>>> Cc: Michal Simek <michal.simek@xilinx.com> >>>>> Signed-off-by: Jagan Teki <jteki@openedev.com> >>>>> --- >>>>> Changes for v2: >>>>> - Add SDHCI >>>>> - Add Ethernet >>>>> >>>>> arch/arm/boot/dts/Makefile | 1 + >>>>> arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++ >>>>> 2 files changed, 96 insertions(+) >>>>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts >>>>> >>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>>> index faacd52..4d7b858 100644 >>>>> --- a/arch/arm/boot/dts/Makefile >>>>> +++ b/arch/arm/boot/dts/Makefile >>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ >>>>> wm8750-apc8750.dtb \ >>>>> wm8850-w70v2.dtb >>>>> dtb-$(CONFIG_ARCH_ZYNQ) += \ >>>>> + zynq-microzed.dtb \ >>>>> zynq-parallella.dtb \ >>>>> zynq-zc702.dtb \ >>>>> zynq-zc706.dtb \ >>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts >>>>> new file mode 100644 >>>>> index 0000000..9e64496 >>>>> --- /dev/null >>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts >>>>> @@ -0,0 +1,95 @@ >>>>> +/* >>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com> >>> >>> >>> Did you created only yourself without copying part of this from others? >>> There is dts in u-boot which I believe you are aware of. >> >> I sent the initial one few months back so at that time, I was created >> and now I just added USB and Ethernet with the reference of zc702 >> board. > > Can you send me a link to that post? I didn't find it. Here is the link [1] > Anyway you should keep Xilinx copyright there. OK then will append Xilinx as well. [1] http://lkml.iu.edu/hypermail/linux/kernel/1601.1/03236.html thanks! -- Jagan. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support 2016-09-23 8:42 ` Jagan Teki @ 2016-09-23 8:54 ` Michal Simek 0 siblings, 0 replies; 7+ messages in thread From: Michal Simek @ 2016-09-23 8:54 UTC (permalink / raw) To: Jagan Teki, Michal Simek Cc: Sören Brinkmann, linux-arm-kernel@lists.infradead.org, devicetree, linux-kernel@vger.kernel.org On 23.9.2016 10:42, Jagan Teki wrote: > On Fri, Sep 23, 2016 at 2:07 PM, Michal Simek <michal.simek@xilinx.com> wrote: >> On 23.9.2016 09:39, Jagan Teki wrote: >>> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote: >>>> On 22.9.2016 22:59, Sören Brinkmann wrote: >>>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote: >>>>>> From: Jagan Teki <jteki@openedev.com> >>>>>> >>>>>> Added basic dts support for MicroZed board. >>>>>> >>>>>> - UART >>>>>> - SDHCI >>>>>> - Ethernet >>>>>> >>>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> >>>>>> Cc: Michal Simek <michal.simek@xilinx.com> >>>>>> Signed-off-by: Jagan Teki <jteki@openedev.com> >>>>>> --- >>>>>> Changes for v2: >>>>>> - Add SDHCI >>>>>> - Add Ethernet >>>>>> >>>>>> arch/arm/boot/dts/Makefile | 1 + >>>>>> arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++ >>>>>> 2 files changed, 96 insertions(+) >>>>>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts >>>>>> >>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>>>> index faacd52..4d7b858 100644 >>>>>> --- a/arch/arm/boot/dts/Makefile >>>>>> +++ b/arch/arm/boot/dts/Makefile >>>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ >>>>>> wm8750-apc8750.dtb \ >>>>>> wm8850-w70v2.dtb >>>>>> dtb-$(CONFIG_ARCH_ZYNQ) += \ >>>>>> + zynq-microzed.dtb \ >>>>>> zynq-parallella.dtb \ >>>>>> zynq-zc702.dtb \ >>>>>> zynq-zc706.dtb \ >>>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts >>>>>> new file mode 100644 >>>>>> index 0000000..9e64496 >>>>>> --- /dev/null >>>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts >>>>>> @@ -0,0 +1,95 @@ >>>>>> +/* >>>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com> >>>> >>>> >>>> Did you created only yourself without copying part of this from others? >>>> There is dts in u-boot which I believe you are aware of. >>> >>> I sent the initial one few months back so at that time, I was created >>> and now I just added USB and Ethernet with the reference of zc702 >>> board. >> >> Can you send me a link to that post? I didn't find it. > > Here is the link [1] > >> Anyway you should keep Xilinx copyright there. > > OK then will append Xilinx as well. > > [1] http://lkml.iu.edu/hypermail/linux/kernel/1601.1/03236.html ok. It was lkml and devicetree not arm mailing list that's why I didn't find it. Thanks, Michal ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-09-23 8:54 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-22 13:21 [PATCH v2] arm: dts: zynq: Add MicroZed board support Jagan Teki
2016-09-22 20:59 ` Sören Brinkmann
2016-09-23 6:03 ` Michal Simek
[not found] ` <4a586da6-8d94-bfbe-ea0c-58b6f8573e7b-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2016-09-23 7:39 ` Jagan Teki
2016-09-23 8:37 ` Michal Simek
2016-09-23 8:42 ` Jagan Teki
2016-09-23 8:54 ` Michal Simek
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).