[PATCHv2 2/4] serial: 8250: of: Load TX FIFO Threshold from DT

[<tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>]

From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>

Initialize the tx_loadsz parameter from passed in devicetree
tx-threshold parameter.
The tx_loadsz is calculated as the number of bytes to fill FIFO
when tx-threshold is triggered.

Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
---
v2  Change from reading tx-loadsz parameter to reading
    tx-threshold and calculating tx_loadsz.
---
 drivers/tty/serial/8250/8250_of.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 38963d7..7a8b5fc 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -195,6 +195,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 	switch (port_type) {
 	case PORT_8250 ... PORT_MAX_8250:
 	{
+		u32 tx_threshold;
 		struct uart_8250_port port8250;
 		memset(&port8250, 0, sizeof(port8250));
 		port8250.port = port;
@@ -202,6 +203,12 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		if (port.fifosize)
 			port8250.capabilities = UART_CAP_FIFO;
 
+		/* Check for TX FIFO threshold & set tx_loadsz */
+		if ((of_property_read_u32(ofdev->dev.of_node, "tx-threshold",
+					  &tx_threshold) == 0) &&
+		    (tx_threshold < port.fifosize))
+			port8250.tx_loadsz = port.fifosize - tx_threshold;
+
 		if (of_property_read_bool(ofdev->dev.of_node,
 					  "auto-flow-control"))
 			port8250.capabilities |= UART_CAP_AFE;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html