From: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>,
Michael Trimarchi
<michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Subject: [PATCH v6 5/6] ARM: dts: imx6qdl-icore: Add usbotg support
Date: Tue, 27 Sep 2016 00:55:35 +0530 [thread overview]
Message-ID: <1474917937-29336-5-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1474917937-29336-1-git-send-email-jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add usbotg support for Engicam i.CoreM6 dql modules.
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Changes for v6:
- none
Changes for v5:
- none
Changes for v4:
- new patch
arch/arm/boot/dts/imx6qdl-icore.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index ffec879..4e79858 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -65,6 +65,15 @@
regulator-boot-on;
regulator-always-on;
};
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&can1 {
@@ -124,6 +133,14 @@
status = "okay";
};
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -198,6 +215,12 @@
>;
};
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-09-26 19:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-26 19:25 [PATCH v6 1/6] of: Add vendor prefix for Engicam s.r.l company Jagan Teki
[not found] ` <1474917937-29336-1-git-send-email-jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
2016-09-26 19:25 ` [PATCH v6 2/6] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support Jagan Teki
2016-09-26 19:25 ` [PATCH v6 3/6] ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo " Jagan Teki
2016-09-26 19:25 ` Jagan Teki [this message]
2016-09-26 19:25 ` [PATCH v6 6/6] ARM: dts: imx6qdl-icore: Add FEC support Jagan Teki
2016-10-03 15:36 ` [PATCH v6 1/6] of: Add vendor prefix for Engicam s.r.l company Rob Herring
[not found] ` <CAL_JsqL9ewVsWL1HUtPuMHvcSP+nW=d=F3++ibLhOF64xz8YwQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-10-03 15:44 ` Jagan Teki
2016-09-26 19:25 ` [PATCH v6 4/6] ARM: dts: imx6qdl-icore: Add usbhost support Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474917937-29336-5-git-send-email-jteki@openedev.com \
--to=jteki-orp2zojdm/rwk0htik3j/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org \
--cc=michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).