devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] Specify all interrupts for the GPIO controller.
@ 2016-10-03 10:10 Vijay Kumar B
       [not found] ` <1475489412-9758-1-git-send-email-vijaykumar-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
  2016-10-08  9:23 ` [PATCH] " Robert Jarzmik
  0 siblings, 2 replies; 3+ messages in thread
From: Vijay Kumar B @ 2016-10-03 10:10 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik
  Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell, Vijay Kumar B,
	Russell King, linux-kernel, Rob Herring, Kumar Gala,
	linux-arm-kernel

The PXA GPIO controller has 3 interrupt outputs, this needs to be
indicated in the DTS file. Without this mainstone's CPLD interrupt 0
will not be raised to the processor.

Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
---
 arch/arm/boot/dts/pxa2xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 5e5af07..9ca2e5b 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -54,8 +54,8 @@
 			reg = <0x40e00000 0x10000>;
 			gpio-controller;
 			#gpio-cells = <0x2>;
-			interrupts = <10>;
-			interrupt-names = "gpio_mux";
+			interrupts = <8 9 10>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 			ranges;
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2016-10-08  9:23 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-10-03 10:10 [PATCH] Specify all interrupts for the GPIO controller Vijay Kumar B
     [not found] ` <1475489412-9758-1-git-send-email-vijaykumar-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
2016-10-03 10:18   ` [RESEND PATCH] ARM: dts: pxa2xx: " Vijay Kumar B
2016-10-08  9:23 ` [PATCH] " Robert Jarzmik

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).