From: Ritesh Harjani <riteshh-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org
Cc: david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
alex.lemberg-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org,
mateusz.nowak-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
Yuliy.Izrailov-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org,
asutoshd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
david.griego-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
stummala-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
venkatg-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
pramod.gurav-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
Ritesh Harjani <riteshh-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v5 01/12] mmc: sdhci-msm: Change poor style writel/readl of registers
Date: Wed, 5 Oct 2016 20:10:29 +0530 [thread overview]
Message-ID: <1475678440-3525-2-git-send-email-riteshh@codeaurora.org> (raw)
In-Reply-To: <1475678440-3525-1-git-send-email-riteshh-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
This patch changes the poor style of writel/readl registers
into more readable format. Also to avoid mixed style format
of readl/writel in sdhci-msm driver.
Signed-off-by: Ritesh Harjani <riteshh-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Acked-by: Adrian Hunter <adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/mmc/host/sdhci-msm.c | 54 ++++++++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 22 deletions(-)
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 8ef44a2a..42f42aa 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -137,8 +137,9 @@ static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
/* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */
- writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
- | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config |= CORE_CK_OUT_EN;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
/* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */
rc = msm_dll_poll_ck_out_en(host, 1);
@@ -305,6 +306,7 @@ static int msm_init_cm_dll(struct sdhci_host *host)
struct mmc_host *mmc = host->mmc;
int wait_cnt = 50;
unsigned long flags;
+ u32 config = 0;
spin_lock_irqsave(&host->lock, flags);
@@ -313,33 +315,40 @@ static int msm_init_cm_dll(struct sdhci_host *host)
* tuning is in progress. Keeping PWRSAVE ON may
* turn off the clock.
*/
- writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC)
- & ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC);
+ config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC);
+ config &= ~CORE_CLK_PWRSAVE;
+ writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC);
/* Write 1 to DLL_RST bit of DLL_CONFIG register */
- writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
- | CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config |= CORE_DLL_RST;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
/* Write 1 to DLL_PDN bit of DLL_CONFIG register */
- writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
- | CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config |= CORE_DLL_PDN;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
msm_cm_dll_set_freq(host);
/* Write 0 to DLL_RST bit of DLL_CONFIG register */
- writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
- & ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~CORE_DLL_RST;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
/* Write 0 to DLL_PDN bit of DLL_CONFIG register */
- writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
- & ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~CORE_DLL_PDN;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
/* Set DLL_EN bit to 1. */
- writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
- | CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG);
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config |= CORE_DLL_EN;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
/* Set CK_OUT_EN bit to 1. */
- writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
- | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config |= CORE_CK_OUT_EN;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
/* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */
while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) &
@@ -536,7 +545,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
struct resource *core_memres;
int ret;
u16 host_version, core_minor;
- u32 core_version, caps;
+ u32 core_version, config;
u8 core_major;
host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host));
@@ -605,8 +614,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
}
/* Reset the core and Enable SDHC mode */
- writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
- CORE_SW_RST, msm_host->core_mem + CORE_POWER);
+ config = readl_relaxed(msm_host->core_mem + CORE_POWER);
+ config |= CORE_SW_RST;
+ writel_relaxed(config, msm_host->core_mem + CORE_POWER);
/* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
usleep_range(1000, 5000);
@@ -636,9 +646,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
* controller versions and must be explicitly enabled.
*/
if (core_major >= 1 && core_minor != 0x11 && core_minor != 0x12) {
- caps = readl_relaxed(host->ioaddr + SDHCI_CAPABILITIES);
- caps |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT;
- writel_relaxed(caps, host->ioaddr +
+ config = readl_relaxed(host->ioaddr + SDHCI_CAPABILITIES);
+ config |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT;
+ writel_relaxed(config, host->ioaddr +
CORE_VENDOR_SPEC_CAPABILITIES0);
}
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-10-05 14:40 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-05 14:40 [PATCH v5 00/12] mmc: sdhci-msm: Add clk-rates, DDR, HS400 support Ritesh Harjani
[not found] ` <1475678440-3525-1-git-send-email-riteshh-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-10-05 14:40 ` Ritesh Harjani [this message]
2016-10-05 14:40 ` [PATCH v5 02/12] mmc: sdhci-msm: Update DLL reset sequence Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 10/12] mmc: sdhci-msm: Add HS400 platform support Ritesh Harjani
2016-10-10 12:08 ` Adrian Hunter
2016-10-10 15:26 ` Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 11/12] mmc: sdhci-msm: Add calibration tuning for CDCLP533 circuit Ritesh Harjani
2016-10-10 12:49 ` Adrian Hunter
[not found] ` <183c2e6a-179b-b042-aef9-d1e5cb90b17d-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-10 15:42 ` Ritesh Harjani
[not found] ` <6993d3a2-7961-2507-60d2-153c14e0bc17-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-10-11 6:39 ` Adrian Hunter
2016-10-11 9:09 ` Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 03/12] mmc: sdhci-msm: add pltfm_data support to get clk-rates from DT Ritesh Harjani
2016-10-10 9:35 ` Adrian Hunter
[not found] ` <7e5c2bfe-0a67-71e2-d083-49d9a712482e-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-10 11:00 ` Ritesh Harjani
[not found] ` <1475678440-3525-4-git-send-email-riteshh-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-10-10 12:57 ` Rob Herring
2016-10-10 16:07 ` Ritesh Harjani
2016-10-10 19:29 ` Rob Herring
2016-10-11 9:06 ` Ritesh Harjani
2016-10-11 12:31 ` Rob Herring
2016-11-07 11:21 ` Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 04/12] ARM: dts: qcom: Add clk-rates to sdhc1 & sdhc2 Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 05/12] mmc: sdhci-msm: Add get_min_clock() and get_max_clock() callback Ritesh Harjani
2016-10-10 9:46 ` Adrian Hunter
2016-10-10 11:05 ` Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 06/12] mmc: sdhci-msm: Enable few quirks Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 07/12] mmc: sdhci-msm: Implement set_clock callback for sdhci-msm Ritesh Harjani
[not found] ` <1475678440-3525-8-git-send-email-riteshh-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-10-10 10:16 ` Adrian Hunter
2016-10-10 10:23 ` Adrian Hunter
[not found] ` <d35224cf-52e0-5ccc-9596-1c338df41c36-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-10 11:17 ` Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 08/12] mmc: sdhci-msm: Add clock changes for DDR mode Ritesh Harjani
[not found] ` <1475678440-3525-9-git-send-email-riteshh-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-10-10 10:26 ` Adrian Hunter
2016-10-05 14:40 ` [PATCH v5 09/12] arm64: dts: qcom: msm8916: Add ddr support to sdhc1 Ritesh Harjani
2016-10-05 14:40 ` [PATCH v5 12/12] sdhci: sdhci-msm: update dll configuration Ritesh Harjani
2016-10-10 13:27 ` Adrian Hunter
2016-10-10 15:54 ` Ritesh Harjani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475678440-3525-2-git-send-email-riteshh@codeaurora.org \
--to=riteshh-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=Yuliy.Izrailov-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org \
--cc=adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=alex.lemberg-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org \
--cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=asutoshd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=david.griego-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mateusz.nowak-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=pramod.gurav-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=stummala-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=venkatg-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).