From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: [PATCH] dt-binding: soc: qcom: smd: Add label property Date: Wed, 19 Oct 2016 19:38:10 -0700 Message-ID: <1476931090-1616-1-git-send-email-bjorn.andersson@linaro.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Andy Gross , David Brown , Rob Herring , Mark Rutland Cc: linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The label property can be used to specify a name of the edge, for consistent naming purposes. Signed-off-by: Bjorn Andersson --- Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt index 97d9b3e1bf39..ea1dc75ec9ea 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt @@ -43,6 +43,13 @@ The edge is described by the following properties: Definition: the identifier for the remote processor as known by the rest of the system. +- label: + Usage: optional + Value type: + Definition: name of the edge, used for debugging and identification + purposes. The node name will be used if this is not + present. + = SMD DEVICES In turn, subnodes of the "edges" represent devices tied to SMD channels on that -- 2.5.0