From: Jeremy McNicoll <jeremymc@redhat.com>
To: linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
devicetree@vger.kernel.org
Cc: robh@kernel.org, andy.gross@linaro.org, sboyd@codeaurora.org,
arnd@arndb.de, bjorn.andersson@linaro.org, mark.rutland@arm.com,
michael.scott@linaro.org, jeremymc@redhat.com
Subject: [RFC V4 PATCH 0/6] msm8992/msm8994: Google Nexus 5X/6P initial board support
Date: Fri, 21 Oct 2016 04:11:07 -0700 [thread overview]
Message-ID: <1477048273-32451-1-git-send-email-jeremymc@redhat.com> (raw)
Original patchset here:
[http://lists.infradead.org/pipermail/linux-arm-kernel/2016-July/442069.html]
V2:
[http://www.spinics.net/lists/linux-soc/msg01059.html]
V3:
[http://www.spinics.net/lists/linux-soc/msg01089.html]
Testing:
-booted on Nexus 5X and 6P (many thanks to Michael Scott for
testing this).
V3->V4:
-default serial config folded into patch that introduces support (5X & 6P).
-dropped BLK_DEV_RAM and updated my buildroot / ramdisk instructions here:
http://people.redhat.com/~jmcnicol/InitRD.txt
-commented msm-id,pmic-id and board-id in DT's
-moved clocks under root node
-removed peripheral_mem as there are no bindings available.
-removed memreserve from 8994, as its not needed and has been successfully
tested by Michael Scott on his 6P.
-removed the entry "msm8994v2" from the dt-bindings doc
-misc comments to DT
-squashed patches down as per review feedback
-split out dt bindings from GCC change into separate commit
Bastian Köcher (2):
msm8994 clocks: global clock support for msm8994 SOC.
arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support
Jeremy McNicoll (4):
arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support
dt-bindings: qcom: clocks: Add msm8994 clock bindings
dt-bindings: qcom: Add msm899(2/4) bindings
arm64: configs: enable configs for msm899(2/4) basic support
Documentation/devicetree/bindings/arm/qcom.txt | 2 +
.../devicetree/bindings/clock/qcom,gcc.txt | 2 +
arch/arm64/boot/dts/qcom/Makefile | 4 +-
.../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 42 +
arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 38 +
arch/arm64/boot/dts/qcom/msm8992.dtsi | 214 ++
.../arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 42 +
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 38 +
arch/arm64/boot/dts/qcom/msm8994-v2.0.dtsi | 31 +
arch/arm64/boot/dts/qcom/msm8994.dtsi | 236 ++
arch/arm64/configs/defconfig | 2 +
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-msm8994.c | 2501 ++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-msm8994.h | 145 ++
15 files changed, 3305 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8992.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-v2.0.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8994.dtsi
create mode 100644 drivers/clk/qcom/gcc-msm8994.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-msm8994.h
--
2.6.1
next reply other threads:[~2016-10-21 11:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-21 11:11 Jeremy McNicoll [this message]
[not found] ` <1477048273-32451-1-git-send-email-jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-10-21 11:11 ` [RFC V4 PATCH 1/6] arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support Jeremy McNicoll
2016-10-21 18:20 ` Bjorn Andersson
2016-10-25 8:15 ` Jeremy McNicoll
[not found] ` <1477048273-32451-2-git-send-email-jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-10-21 19:21 ` Stephen Boyd
[not found] ` <20161021192147.GM26139-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-10-25 9:40 ` Jeremy McNicoll
2016-10-25 10:41 ` Jeremy McNicoll
2016-10-21 11:11 ` [RFC V4 PATCH 2/6] dt-bindings: qcom: clocks: Add msm8994 clock bindings Jeremy McNicoll
2016-10-21 11:11 ` [RFC V4 PATCH 3/6] msm8994 clocks: global clock support for msm8994 SOC Jeremy McNicoll
2016-10-21 11:11 ` [RFC V4 PATCH 4/6] dt-bindings: qcom: Add msm899(2/4) bindings Jeremy McNicoll
2016-10-21 11:11 ` [RFC V4 PATCH 6/6] arm64: configs: enable configs for msm899(2/4) basic support Jeremy McNicoll
[not found] ` <1477048273-32451-7-git-send-email-jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-10-21 18:27 ` Bjorn Andersson
2016-10-21 22:32 ` Jeremy McNicoll
2016-10-25 8:07 ` Jeremy McNicoll
2016-10-21 11:11 ` [RFC V4 PATCH 5/6] arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support Jeremy McNicoll
2016-10-21 18:25 ` Bjorn Andersson
2016-10-25 8:00 ` Jeremy McNicoll
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477048273-32451-1-git-send-email-jeremymc@redhat.com \
--to=jeremymc@redhat.com \
--cc=andy.gross@linaro.org \
--cc=arnd@arndb.de \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael.scott@linaro.org \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).