From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Wu Subject: [PATCH] i2c: rk3x: Give the tuning value 0 during rk3x_i2c_v0_calc_timings Date: Sat, 22 Oct 2016 16:43:42 +0800 Message-ID: <1477125822-30644-1-git-send-email-david.wu@rock-chips.com> Content-Type: text/plain; charset="utf-8" Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org, wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org Cc: dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, David Wu List-Id: devicetree@vger.kernel.org We found a bug that i2c transfer sometimes failed on 3066a board with stabel-4.8, the con register would be updated by uninitialized tuning value, it made the i2c transfer failed. So give the tuning value to be zero during rk3x_i2c_v0_calc_timings. Signed-off-by: David Wu --- drivers/i2c/busses/i2c-rk3x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 50702c7..df22066 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -694,6 +694,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate, t_calc->div_low--; t_calc->div_high--; + /* Give the tuning value 0, that would not update con register */ + t_calc->tuning = 0; /* Maximum divider supported by hw is 0xffff */ if (t_calc->div_low > 0xffff) { t_calc->div_low = 0xffff; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html