From: Noam Camus <noamca@mellanox.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, daniel.lezcano@linaro.org
Cc: tglx@linutronix.de, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Noam Camus <noamca@mellanox.com>
Subject: [PATCH v2 1/3] soc: Support for NPS HW scheduling
Date: Sun, 23 Oct 2016 15:12:26 +0300 [thread overview]
Message-ID: <1477224748-25223-2-git-send-email-noamca@mellanox.com> (raw)
In-Reply-To: <1477224748-25223-1-git-send-email-noamca@mellanox.com>
From: Noam Camus <noamca@mellanox.com>
This new header file is for NPS400 SoC (part of ARC architecture).
The header file includes macros for save/restore of HW scheduling.
The control of HW scheduling is acheived by writing core registers.
This code was moved from arc/plat-eznps so it can be used
from drivers/clocksource/, available only for CONFIG_EZNPS_MTM_EXT.
Signed-off-by: Noam Camus <noamca@mellanox.com>
---
arch/arc/plat-eznps/include/plat/ctop.h | 2 -
include/soc/nps/mtm.h | 59 +++++++++++++++++++++++++++++++
2 files changed, 59 insertions(+), 2 deletions(-)
create mode 100644 include/soc/nps/mtm.h
diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h
index 9d6718c..ee2e32d 100644
--- a/arch/arc/plat-eznps/include/plat/ctop.h
+++ b/arch/arc/plat-eznps/include/plat/ctop.h
@@ -46,9 +46,7 @@
#define CTOP_AUX_UDMC (CTOP_AUX_BASE + 0x300)
/* EZchip core instructions */
-#define CTOP_INST_HWSCHD_OFF_R3 0x3B6F00BF
#define CTOP_INST_HWSCHD_OFF_R4 0x3C6F00BF
-#define CTOP_INST_HWSCHD_RESTORE_R3 0x3E6F70C3
#define CTOP_INST_HWSCHD_RESTORE_R4 0x3E6F7103
#define CTOP_INST_SCHD_RW 0x3E6F7004
#define CTOP_INST_SCHD_RD 0x3E6F7084
diff --git a/include/soc/nps/mtm.h b/include/soc/nps/mtm.h
new file mode 100644
index 0000000..d2f5e7e
--- /dev/null
+++ b/include/soc/nps/mtm.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef SOC_NPS_MTM_H
+#define SOC_NPS_MTM_H
+
+#define CTOP_INST_HWSCHD_OFF_R3 0x3B6F00BF
+#define CTOP_INST_HWSCHD_RESTORE_R3 0x3E6F70C3
+
+static inline void hw_schd_save(unsigned int *flags)
+{
+ __asm__ __volatile__(
+ " .word %1\n"
+ " st r3,[%0]\n"
+ :
+ : "r"(flags), "i"(CTOP_INST_HWSCHD_OFF_R3)
+ : "r3", "memory");
+}
+
+static inline void hw_schd_restore(unsigned int flags)
+{
+ __asm__ __volatile__(
+ " mov r3, %0\n"
+ " .word %1\n"
+ :
+ : "r"(flags), "i"(CTOP_INST_HWSCHD_RESTORE_R3)
+ : "r3");
+}
+
+#endif /* SOC_NPS_MTM_H */
--
1.7.1
next prev parent reply other threads:[~2016-10-23 12:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-23 12:12 [PATCH v2 0/3] Add clockevet for timer-nps driver to NPS400 SoC Noam Camus
2016-10-23 12:12 ` Noam Camus [this message]
[not found] ` <1477224748-25223-2-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-10-31 10:26 ` [PATCH v2 1/3] soc: Support for NPS HW scheduling Daniel Lezcano
2016-10-31 12:26 ` Noam Camus
[not found] ` <1477224748-25223-1-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-10-23 12:12 ` [PATCH v2 2/3] clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer Noam Camus
[not found] ` <1477224748-25223-3-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-10-31 10:28 ` Daniel Lezcano
2016-10-31 15:19 ` Noam Camus
2016-10-23 12:12 ` [PATCH v2 3/3] clocksource: Add clockevent support to NPS400 driver Noam Camus
2016-10-30 20:41 ` Rob Herring
2016-10-31 10:52 ` Daniel Lezcano
2016-10-31 17:03 ` Noam Camus
2016-10-31 17:51 ` Vineet Gupta
[not found] ` <DB6PR0501MB2518720A0F95ACBBBCB1CB27AAAE0-wTfl6qNNZ1PL+HUNrKNnF8DSnupUy6xnnBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2016-11-01 20:01 ` Daniel Lezcano
2016-11-08 8:30 ` Noam Camus
2016-11-10 10:34 ` Daniel Lezcano
2016-11-10 13:00 ` Noam Camus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477224748-25223-2-git-send-email-noamca@mellanox.com \
--to=noamca@mellanox.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).