From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Mason Subject: [PATCH v6 4/7] Documentation: devicetree: net: add NS2 bindings to amac Date: Fri, 4 Nov 2016 01:10:59 -0400 Message-ID: <1478236262-3351-5-git-send-email-jon.mason@broadcom.com> References: <1478236262-3351-1-git-send-email-jon.mason@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1478236262-3351-1-git-send-email-jon.mason@broadcom.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: David Miller , Rob Herring , Mark Rutland , Florian Fainelli Cc: devicetree@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, rafal@milecki.pl, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Clean-up the documentation to the bgmac-amac driver, per suggestion by Rob Herring, and add details for NS2 support. Signed-off-by: Jon Mason Reviewed-by: Florian Fainelli --- Documentation/devicetree/bindings/net/brcm,amac.txt | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index ba5ecc1..2fefa1a 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -2,11 +2,17 @@ Broadcom AMAC Ethernet Controller Device Tree Bindings ------------------------------------------------------------- Required properties: - - compatible: "brcm,amac" or "brcm,nsp-amac" - - reg: Address and length of the GMAC registers, - Address and length of the GMAC IDM registers - - reg-names: Names of the registers. Must have both "amac_base" and - "idm_base" + - compatible: "brcm,amac" + "brcm,nsp-amac" + "brcm,ns2-amac" + - reg: Address and length of the register set for the device. It + contains the information of registers in the same order as + described by reg-names + - reg-names: Names of the registers. + "amac_base": Address and length of the GMAC registers + "idm_base": Address and length of the GMAC IDM registers + "nicpm_base": Address and length of the NIC Port Manager + registers (required for Northstar2) - interrupts: Interrupt number Optional properties: -- 2.7.4