From: Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v4 2/3] clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer
Date: Sun, 6 Nov 2016 19:44:57 +0200 [thread overview]
Message-ID: <1478454298-381-3-git-send-email-noamca@mellanox.com> (raw)
In-Reply-To: <1478454298-381-1-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
From: Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
nps_setup_clocksource() should take node as only argument i.e.:
replace
int __init nps_setup_clocksource(struct device_node *node, struct clk *clk)
with
int __init nps_setup_clocksource(struct device_node *node)
This is also serve as preperation for next patch which adds support
for clockevents to nps400.
Specifically we add new function nps_get_timer_clk() to serve clocksource
and later clockevent registration.
Signed-off-by: Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
---
drivers/clocksource/timer-nps.c | 63 +++++++++++++++++++++++----------------
1 files changed, 37 insertions(+), 26 deletions(-)
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
index 70c149a..1533349 100644
--- a/drivers/clocksource/timer-nps.c
+++ b/drivers/clocksource/timer-nps.c
@@ -46,7 +46,33 @@
/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
-static unsigned long nps_timer_rate;
+static int nps_get_timer_clk(struct device_node *node,
+ unsigned long *timer_freq,
+ struct clk **clk)
+{
+ int ret;
+
+ *clk = of_clk_get(node, 0);
+ if (IS_ERR(*clk)) {
+ pr_err("timer missing clk");
+ return PTR_ERR(*clk);
+ }
+
+ ret = clk_prepare_enable(*clk);
+ if (ret) {
+ pr_err("Couldn't enable parent clk\n");
+ return ret;
+ }
+
+ *timer_freq = clk_get_rate(*clk);
+ if (!(*timer_freq)) {
+ pr_err("Couldn't clk get rate\n");
+ clk_disable_unprepare(*clk);
+ return *timer_freq;
+ }
+
+ return 0;
+}
static cycle_t nps_clksrc_read(struct clocksource *clksrc)
{
@@ -55,26 +81,24 @@ static cycle_t nps_clksrc_read(struct clocksource *clksrc)
return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
}
-static int __init nps_setup_clocksource(struct device_node *node,
- struct clk *clk)
+static int __init nps_setup_clocksource(struct device_node *node)
{
int ret, cluster;
+ struct clk *clk;
+ unsigned long nps_timer1_freq;
+
for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
nps_msu_reg_low_addr[cluster] =
nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
- NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
+ NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
- ret = clk_prepare_enable(clk);
- if (ret) {
- pr_err("Couldn't enable parent clock\n");
+ ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk);
+ if (ret)
return ret;
- }
- nps_timer_rate = clk_get_rate(clk);
-
- ret = clocksource_mmio_init(nps_msu_reg_low_addr, "EZnps-tick",
- nps_timer_rate, 301, 32, nps_clksrc_read);
+ ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick",
+ nps_timer1_freq, 301, 32, nps_clksrc_read);
if (ret) {
pr_err("Couldn't register clock source.\n");
clk_disable_unprepare(clk);
@@ -83,18 +107,5 @@ static int __init nps_setup_clocksource(struct device_node *node,
return ret;
}
-static int __init nps_timer_init(struct device_node *node)
-{
- struct clk *clk;
-
- clk = of_clk_get(node, 0);
- if (IS_ERR(clk)) {
- pr_err("Can't get timer clock.\n");
- return PTR_ERR(clk);
- }
-
- return nps_setup_clocksource(node, clk);
-}
-
CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
- nps_timer_init);
+ nps_setup_clocksource);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-11-06 17:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-06 17:44 [PATCH v4 0/3] Add clockevet for timer-nps driver to NPS400 SoC Noam Camus
2016-11-06 17:44 ` [PATCH v4 1/3] soc: Support for NPS HW scheduling Noam Camus
[not found] ` <1478454298-381-1-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-11-06 17:44 ` Noam Camus [this message]
[not found] ` <1478454298-381-3-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-11-11 23:26 ` [PATCH v4 2/3] clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer Daniel Lezcano
2016-11-12 14:54 ` Noam Camus
2016-11-06 17:44 ` [PATCH v4 3/3] clocksource: Add clockevent support to NPS400 driver Noam Camus
2016-11-11 3:28 ` [PATCH v4 0/3] Add clockevet for timer-nps driver to NPS400 SoC Noam Camus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478454298-381-3-git-send-email-noamca@mellanox.com \
--to=noamca-vpraknaxozvwk0htik3j/w@public.gmane.org \
--cc=daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).