From mboxrd@z Thu Jan 1 00:00:00 1970 From: William Wu Subject: [PATCH] phy: rockchip-inno-usb2: correct 480MHz output clock stable time Date: Mon, 7 Nov 2016 21:00:58 +0800 Message-ID: <1478523658-9400-1-git-send-email-wulf@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+glpar-linux-rockchip=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: kishon-l0cyMroinI0@public.gmane.org, heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Cc: huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, groeck-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org, frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org, briannorris-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org We found that the system crashed due to 480MHz output clock of USB2 PHY was unstable after clock had been enabled by gpu module. Theoretically, 1 millisecond is a critical value for 480MHz output clock stable time, so we try to change the delay time to 1.2 millisecond to avoid this issue. Signed-off-by: William Wu --- drivers/phy/phy-rockchip-inno-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c index ecfd7d1..8f2d2b6 100644 --- a/drivers/phy/phy-rockchip-inno-usb2.c +++ b/drivers/phy/phy-rockchip-inno-usb2.c @@ -267,7 +267,7 @@ static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw) return ret; /* waitting for the clk become stable */ - mdelay(1); + udelay(1200); } return 0; -- 2.0.0