* [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board @ 2012-11-03 14:49 Thomas Abraham 2012-11-06 11:28 ` Kukjin Kim 2012-11-12 14:07 ` Tomasz Figa 0 siblings, 2 replies; 10+ messages in thread From: Thomas Abraham @ 2012-11-03 14:49 UTC (permalink / raw) To: linux-arm-kernel, devicetree-discuss Cc: grant.likely, rob.herring, linux-samsung-soc, kgene.kim, chaos.youn, t.figa Add a minimal board dts file for Samsung Exynos4412 based SMDK board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- This patch depends the on the following patch posted by Tomasz Figa. "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 +++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9f..36488a5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ + exynos4412-smdk4412.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 index 0000000..f05bf57 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -0,0 +1,45 @@ +/* + * Samsung's Exynos4412 based SMDK board device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's SMDK4412 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4412.dtsi" + +/ { + model = "Samsung SMDK evaluation board based on Exynos4412"; + compatible = "samsung,smdk4412", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; +}; -- 1.6.6.rc2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* RE: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-03 14:49 [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board Thomas Abraham @ 2012-11-06 11:28 ` Kukjin Kim 2012-11-15 8:14 ` Thomas Abraham 2012-11-12 14:07 ` Tomasz Figa 1 sibling, 1 reply; 10+ messages in thread From: Kukjin Kim @ 2012-11-06 11:28 UTC (permalink / raw) To: 'Thomas Abraham', linux-arm-kernel, devicetree-discuss Cc: grant.likely, rob.herring, linux-samsung-soc, chaos.youn, t.figa Thomas Abraham wrote: > > Add a minimal board dts file for Samsung Exynos4412 based SMDK board. > > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > --- > This patch depends the on the following patch posted by Tomasz Figa. > "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 > +++++++++++++++++++++++++++++ > 2 files changed, 46 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f37cf9f..36488a5 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ > dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ > exynos4210-smdkv310.dtb \ > exynos4210-trats.dtb \ > + exynos4412-smdk4412.dtb \ > exynos5250-smdk5250.dtb > dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ > diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts > b/arch/arm/boot/dts/exynos4412-smdk4412.dts > new file mode 100644 > index 0000000..f05bf57 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts > @@ -0,0 +1,45 @@ > +/* > + * Samsung's Exynos4412 based SMDK board device tree source > + * > + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Device tree source file for Samsung's SMDK4412 board which is based on > + * Samsung's Exynos4412 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +/include/ "exynos4412.dtsi" > + > +/ { > + model = "Samsung SMDK evaluation board based on Exynos4412"; > + compatible = "samsung,smdk4412", "samsung,exynos4412"; > + > + memory { > + reg = <0x40000000 0x40000000>; > + }; > + > + chosen { > + bootargs ="root=/dev/ram0 rw ramdisk=8192 > initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; > + }; > + > + serial@13800000 { > + status = "okay"; > + }; > + > + serial@13810000 { > + status = "okay"; > + }; > + > + serial@13820000 { > + status = "okay"; > + }; > + > + serial@13830000 { > + status = "okay"; > + }; > +}; > -- > 1.6.6.rc2 Looks good to me, will apply. BTW, its default console is ttySAC1 not ttySAC2? Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-06 11:28 ` Kukjin Kim @ 2012-11-15 8:14 ` Thomas Abraham 0 siblings, 0 replies; 10+ messages in thread From: Thomas Abraham @ 2012-11-15 8:14 UTC (permalink / raw) To: Kukjin Kim Cc: linux-arm-kernel, devicetree-discuss, grant.likely, rob.herring, linux-samsung-soc, chaos.youn, t.figa On 6 November 2012 16:58, Kukjin Kim <kgene.kim@samsung.com> wrote: > Thomas Abraham wrote: >> >> Add a minimal board dts file for Samsung Exynos4412 based SMDK board. >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> >> --- >> This patch depends the on the following patch posted by Tomasz Figa. >> "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" >> >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 >> +++++++++++++++++++++++++++++ >> 2 files changed, 46 insertions(+), 0 deletions(-) >> create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index f37cf9f..36488a5 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ >> dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ >> exynos4210-smdkv310.dtb \ >> exynos4210-trats.dtb \ >> + exynos4412-smdk4412.dtb \ >> exynos5250-smdk5250.dtb >> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb >> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ >> diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts >> b/arch/arm/boot/dts/exynos4412-smdk4412.dts >> new file mode 100644 >> index 0000000..f05bf57 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts >> @@ -0,0 +1,45 @@ >> +/* >> + * Samsung's Exynos4412 based SMDK board device tree source >> + * >> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * Device tree source file for Samsung's SMDK4412 board which is based on >> + * Samsung's Exynos4412 SoC. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +/dts-v1/; >> +/include/ "exynos4412.dtsi" >> + >> +/ { >> + model = "Samsung SMDK evaluation board based on Exynos4412"; >> + compatible = "samsung,smdk4412", "samsung,exynos4412"; >> + >> + memory { >> + reg = <0x40000000 0x40000000>; >> + }; >> + >> + chosen { >> + bootargs ="root=/dev/ram0 rw ramdisk=8192 >> initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; >> + }; >> + >> + serial@13800000 { >> + status = "okay"; >> + }; >> + >> + serial@13810000 { >> + status = "okay"; >> + }; >> + >> + serial@13820000 { >> + status = "okay"; >> + }; >> + >> + serial@13830000 { >> + status = "okay"; >> + }; >> +}; >> -- >> 1.6.6.rc2 > > Looks good to me, will apply. > > BTW, its default console is ttySAC1 not ttySAC2? Thanks Mr. Kim. There is support for both ttySAC1 and ttySAC2 as uart ports. There are corresponding switches on the board that have to be set. But the default setting is always to use ttySAC1. Thanks, Thomas. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-03 14:49 [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board Thomas Abraham 2012-11-06 11:28 ` Kukjin Kim @ 2012-11-12 14:07 ` Tomasz Figa 2012-11-15 8:18 ` Thomas Abraham 1 sibling, 1 reply; 10+ messages in thread From: Tomasz Figa @ 2012-11-12 14:07 UTC (permalink / raw) To: Thomas Abraham Cc: linux-arm-kernel, devicetree-discuss, grant.likely, rob.herring, linux-samsung-soc, kgene.kim, chaos.youn Hi Thomas, On Saturday 03 of November 2012 20:19:32 Thomas Abraham wrote: > Add a minimal board dts file for Samsung Exynos4412 based SMDK board. > > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > --- > This patch depends the on the following patch posted by Tomasz Figa. > "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 > +++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), 0 > deletions(-) > create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f37cf9f..36488a5 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ > dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ > exynos4210-smdkv310.dtb \ > exynos4210-trats.dtb \ > + exynos4412-smdk4412.dtb \ > exynos5250-smdk5250.dtb > dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ > diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts > b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 > index 0000000..f05bf57 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts > @@ -0,0 +1,45 @@ > +/* > + * Samsung's Exynos4412 based SMDK board device tree source > + * > + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Device tree source file for Samsung's SMDK4412 board which is based > on + * Samsung's Exynos4412 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as + > * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +/include/ "exynos4412.dtsi" > + > +/ { > + model = "Samsung SMDK evaluation board based on Exynos4412"; > + compatible = "samsung,smdk4412", "samsung,exynos4412"; > + > + memory { > + reg = <0x40000000 0x40000000>; > + }; This will not boot, because section size limit is set to 256 MiB. It might work with CONFIG_ARM_ATAG_DTB_COMPAT enabled, because the memory configuration from DT is ignored and values from ATAGs are taken instead. I suggest you to change it to 4 banks of 256 MiB. > + chosen { > + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M > console=ttySAC1,115200 init=/linuxrc"; + }; > + > + serial@13800000 { > + status = "okay"; > + }; > + > + serial@13810000 { > + status = "okay"; > + }; > + > + serial@13820000 { > + status = "okay"; > + }; > + > + serial@13830000 { > + status = "okay"; > + }; > +}; Otherwise looks fine. Best regards, -- Tomasz Figa Samsung Poland R&D Center SW Solution Development, Linux Platform ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-12 14:07 ` Tomasz Figa @ 2012-11-15 8:18 ` Thomas Abraham 2012-11-16 11:11 ` Tomasz Figa 0 siblings, 1 reply; 10+ messages in thread From: Thomas Abraham @ 2012-11-15 8:18 UTC (permalink / raw) To: Tomasz Figa Cc: linux-arm-kernel, devicetree-discuss, grant.likely, rob.herring, linux-samsung-soc, kgene.kim, chaos.youn Hi Tomasz, Thanks for your comments. On 12 November 2012 19:37, Tomasz Figa <t.figa@samsung.com> wrote: > Hi Thomas, > > On Saturday 03 of November 2012 20:19:32 Thomas Abraham wrote: >> Add a minimal board dts file for Samsung Exynos4412 based SMDK board. >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> >> --- >> This patch depends the on the following patch posted by Tomasz Figa. >> "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" >> >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 >> +++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), 0 >> deletions(-) >> create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index f37cf9f..36488a5 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ >> dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ >> exynos4210-smdkv310.dtb \ >> exynos4210-trats.dtb \ >> + exynos4412-smdk4412.dtb \ >> exynos5250-smdk5250.dtb >> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb >> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ >> diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts >> b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 >> index 0000000..f05bf57 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts >> @@ -0,0 +1,45 @@ >> +/* >> + * Samsung's Exynos4412 based SMDK board device tree source >> + * >> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * Device tree source file for Samsung's SMDK4412 board which is based >> on + * Samsung's Exynos4412 SoC. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as + >> * published by the Free Software Foundation. >> +*/ >> + >> +/dts-v1/; >> +/include/ "exynos4412.dtsi" >> + >> +/ { >> + model = "Samsung SMDK evaluation board based on Exynos4412"; >> + compatible = "samsung,smdk4412", "samsung,exynos4412"; >> + >> + memory { >> + reg = <0x40000000 0x40000000>; >> + }; > > This will not boot, because section size limit is set to 256 MiB. > > It might work with CONFIG_ARM_ATAG_DTB_COMPAT enabled, because the memory > configuration from DT is ignored and values from ATAGs are taken instead. > > I suggest you to change it to 4 banks of 256 MiB. Thanks for pointing this out. So are there any existing exynos based platforms that use sparse mem? If not, we should probably remove the section length configuration itself for mach-exynos. I suspect this setting might not help with the single kernel image support as well. Thanks, Thomas. > >> + chosen { >> + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M >> console=ttySAC1,115200 init=/linuxrc"; + }; >> + >> + serial@13800000 { >> + status = "okay"; >> + }; >> + >> + serial@13810000 { >> + status = "okay"; >> + }; >> + >> + serial@13820000 { >> + status = "okay"; >> + }; >> + >> + serial@13830000 { >> + status = "okay"; >> + }; >> +}; > > Otherwise looks fine. > > Best regards, > -- > Tomasz Figa > Samsung Poland R&D Center > SW Solution Development, Linux Platform > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-15 8:18 ` Thomas Abraham @ 2012-11-16 11:11 ` Tomasz Figa 2012-11-16 12:33 ` Thomas Abraham 0 siblings, 1 reply; 10+ messages in thread From: Tomasz Figa @ 2012-11-16 11:11 UTC (permalink / raw) To: Thomas Abraham Cc: linux-arm-kernel, devicetree-discuss, grant.likely, rob.herring, linux-samsung-soc, kgene.kim, chaos.youn On Thursday 15 of November 2012 13:48:55 Thomas Abraham wrote: > Hi Tomasz, > > Thanks for your comments. > > On 12 November 2012 19:37, Tomasz Figa <t.figa@samsung.com> wrote: > > Hi Thomas, > > > > On Saturday 03 of November 2012 20:19:32 Thomas Abraham wrote: > >> Add a minimal board dts file for Samsung Exynos4412 based SMDK board. > >> > >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > >> --- > >> This patch depends the on the following patch posted by Tomasz Figa. > >> "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" > >> > >> arch/arm/boot/dts/Makefile | 1 + > >> arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 > >> > >> +++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), 0 > >> deletions(-) > >> > >> create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts > >> > >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > >> index f37cf9f..36488a5 100644 > >> --- a/arch/arm/boot/dts/Makefile > >> +++ b/arch/arm/boot/dts/Makefile > >> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ > >> > >> dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ > >> > >> exynos4210-smdkv310.dtb \ > >> exynos4210-trats.dtb \ > >> > >> + exynos4412-smdk4412.dtb \ > >> > >> exynos5250-smdk5250.dtb > >> > >> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > >> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ > >> > >> diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts > >> b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 > >> index 0000000..f05bf57 > >> --- /dev/null > >> +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts > >> @@ -0,0 +1,45 @@ > >> +/* > >> + * Samsung's Exynos4412 based SMDK board device tree source > >> + * > >> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. > >> + * http://www.samsung.com > >> + * > >> + * Device tree source file for Samsung's SMDK4412 board which is > >> based > >> on + * Samsung's Exynos4412 SoC. > >> + * > >> + * This program is free software; you can redistribute it and/or > >> modify + * it under the terms of the GNU General Public License > >> version 2 as + * published by the Free Software Foundation. > >> +*/ > >> + > >> +/dts-v1/; > >> +/include/ "exynos4412.dtsi" > >> + > >> +/ { > >> + model = "Samsung SMDK evaluation board based on Exynos4412"; > >> + compatible = "samsung,smdk4412", "samsung,exynos4412"; > >> + > >> + memory { > >> + reg = <0x40000000 0x40000000>; > >> + }; > > > > This will not boot, because section size limit is set to 256 MiB. > > > > It might work with CONFIG_ARM_ATAG_DTB_COMPAT enabled, because the > > memory configuration from DT is ignored and values from ATAGs are > > taken instead. > > > > I suggest you to change it to 4 banks of 256 MiB. > > Thanks for pointing this out. So are there any existing exynos based > platforms that use sparse mem? If not, we should probably remove the > section length configuration itself for mach-exynos. I suspect this > setting might not help with the single kernel image support as well. Isn't sparse memory the only configuration available for ARCH_EXYNOS? Best regards, -- Tomasz Figa Samsung Poland R&D Center SW Solution Development, Linux Platform ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-16 11:11 ` Tomasz Figa @ 2012-11-16 12:33 ` Thomas Abraham 2012-11-16 12:58 ` Tomasz Figa 0 siblings, 1 reply; 10+ messages in thread From: Thomas Abraham @ 2012-11-16 12:33 UTC (permalink / raw) To: Tomasz Figa Cc: linux-arm-kernel, devicetree-discuss, grant.likely, rob.herring, linux-samsung-soc, kgene.kim, chaos.youn On 16 November 2012 16:41, Tomasz Figa <t.figa@samsung.com> wrote: > On Thursday 15 of November 2012 13:48:55 Thomas Abraham wrote: >> Hi Tomasz, >> >> Thanks for your comments. >> >> On 12 November 2012 19:37, Tomasz Figa <t.figa@samsung.com> wrote: >> > Hi Thomas, >> > >> > On Saturday 03 of November 2012 20:19:32 Thomas Abraham wrote: >> >> Add a minimal board dts file for Samsung Exynos4412 based SMDK board. >> >> >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> >> >> --- >> >> This patch depends the on the following patch posted by Tomasz Figa. >> >> "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" >> >> >> >> arch/arm/boot/dts/Makefile | 1 + >> >> arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 >> >> >> >> +++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), 0 >> >> deletions(-) >> >> >> >> create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts >> >> >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> >> index f37cf9f..36488a5 100644 >> >> --- a/arch/arm/boot/dts/Makefile >> >> +++ b/arch/arm/boot/dts/Makefile >> >> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ >> >> >> >> dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ >> >> >> >> exynos4210-smdkv310.dtb \ >> >> exynos4210-trats.dtb \ >> >> >> >> + exynos4412-smdk4412.dtb \ >> >> >> >> exynos5250-smdk5250.dtb >> >> >> >> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb >> >> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ >> >> >> >> diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts >> >> b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 >> >> index 0000000..f05bf57 >> >> --- /dev/null >> >> +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts >> >> @@ -0,0 +1,45 @@ >> >> +/* >> >> + * Samsung's Exynos4412 based SMDK board device tree source >> >> + * >> >> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. >> >> + * http://www.samsung.com >> >> + * >> >> + * Device tree source file for Samsung's SMDK4412 board which is >> >> based >> >> on + * Samsung's Exynos4412 SoC. >> >> + * >> >> + * This program is free software; you can redistribute it and/or >> >> modify + * it under the terms of the GNU General Public License >> >> version 2 as + * published by the Free Software Foundation. >> >> +*/ >> >> + >> >> +/dts-v1/; >> >> +/include/ "exynos4412.dtsi" >> >> + >> >> +/ { >> >> + model = "Samsung SMDK evaluation board based on Exynos4412"; >> >> + compatible = "samsung,smdk4412", "samsung,exynos4412"; >> >> + >> >> + memory { >> >> + reg = <0x40000000 0x40000000>; >> >> + }; >> > >> > This will not boot, because section size limit is set to 256 MiB. >> > >> > It might work with CONFIG_ARM_ATAG_DTB_COMPAT enabled, because the >> > memory configuration from DT is ignored and values from ATAGs are >> > taken instead. >> > >> > I suggest you to change it to 4 banks of 256 MiB. >> >> Thanks for pointing this out. So are there any existing exynos based >> platforms that use sparse mem? If not, we should probably remove the >> section length configuration itself for mach-exynos. I suspect this >> setting might not help with the single kernel image support as well. > > Isn't sparse memory the only configuration available for ARCH_EXYNOS? Yes, true. Since sparsemem is choosen as default for Exynos, flatmem option is not available. Theoretically, sparsemem could be used on Exynos platforms, but if all existing exynos4/5 based boards have no holes in memory, then why not use flatmem instead? If there are performance benefits of using flatmem over sparesmem on systems without any memory holes, then it is a compelling reason to stop using sparsemem on Exynos. But then, what if there is a new Exynos4/5 based board that comes up and that has a memory hole? Or, how about removing sparsemem as default option for ARCH_EXYNOS and enabling sparsemem for boards that need it. Thanks, Thomas. > > Best regards, > -- > Tomasz Figa > Samsung Poland R&D Center > SW Solution Development, Linux Platform > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-16 12:33 ` Thomas Abraham @ 2012-11-16 12:58 ` Tomasz Figa 2012-11-16 13:17 ` Thomas Abraham 0 siblings, 1 reply; 10+ messages in thread From: Tomasz Figa @ 2012-11-16 12:58 UTC (permalink / raw) To: Thomas Abraham Cc: linux-arm-kernel, devicetree-discuss, grant.likely, rob.herring, linux-samsung-soc, kgene.kim, chaos.youn On Friday 16 of November 2012 18:03:15 Thomas Abraham wrote: > On 16 November 2012 16:41, Tomasz Figa <t.figa@samsung.com> wrote: > > On Thursday 15 of November 2012 13:48:55 Thomas Abraham wrote: > >> Hi Tomasz, > >> > >> Thanks for your comments. > >> > >> On 12 November 2012 19:37, Tomasz Figa <t.figa@samsung.com> wrote: > >> > Hi Thomas, > >> > > >> > On Saturday 03 of November 2012 20:19:32 Thomas Abraham wrote: > >> >> Add a minimal board dts file for Samsung Exynos4412 based SMDK > >> >> board. > >> >> > >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > >> >> --- > >> >> This patch depends the on the following patch posted by Tomasz > >> >> Figa. > >> >> "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" > >> >> > >> >> arch/arm/boot/dts/Makefile | 1 + > >> >> arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 > >> >> > >> >> +++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), 0 > >> >> deletions(-) > >> >> > >> >> create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts > >> >> > >> >> diff --git a/arch/arm/boot/dts/Makefile > >> >> b/arch/arm/boot/dts/Makefile > >> >> index f37cf9f..36488a5 100644 > >> >> --- a/arch/arm/boot/dts/Makefile > >> >> +++ b/arch/arm/boot/dts/Makefile > >> >> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ > >> >> > >> >> dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ > >> >> > >> >> exynos4210-smdkv310.dtb \ > >> >> exynos4210-trats.dtb \ > >> >> > >> >> + exynos4412-smdk4412.dtb \ > >> >> > >> >> exynos5250-smdk5250.dtb > >> >> > >> >> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > >> >> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ > >> >> > >> >> diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts > >> >> b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 > >> >> index 0000000..f05bf57 > >> >> --- /dev/null > >> >> +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts > >> >> @@ -0,0 +1,45 @@ > >> >> +/* > >> >> + * Samsung's Exynos4412 based SMDK board device tree source > >> >> + * > >> >> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. > >> >> + * http://www.samsung.com > >> >> + * > >> >> + * Device tree source file for Samsung's SMDK4412 board which is > >> >> based > >> >> on + * Samsung's Exynos4412 SoC. > >> >> + * > >> >> + * This program is free software; you can redistribute it and/or > >> >> modify + * it under the terms of the GNU General Public License > >> >> version 2 as + * published by the Free Software Foundation. > >> >> +*/ > >> >> + > >> >> +/dts-v1/; > >> >> +/include/ "exynos4412.dtsi" > >> >> + > >> >> +/ { > >> >> + model = "Samsung SMDK evaluation board based on Exynos4412"; > >> >> + compatible = "samsung,smdk4412", "samsung,exynos4412"; > >> >> + > >> >> + memory { > >> >> + reg = <0x40000000 0x40000000>; > >> >> + }; > >> > > >> > This will not boot, because section size limit is set to 256 MiB. > >> > > >> > It might work with CONFIG_ARM_ATAG_DTB_COMPAT enabled, because the > >> > memory configuration from DT is ignored and values from ATAGs are > >> > taken instead. > >> > > >> > I suggest you to change it to 4 banks of 256 MiB. > >> > >> Thanks for pointing this out. So are there any existing exynos based > >> platforms that use sparse mem? If not, we should probably remove the > >> section length configuration itself for mach-exynos. I suspect this > >> setting might not help with the single kernel image support as well. > > > > Isn't sparse memory the only configuration available for ARCH_EXYNOS? > > Yes, true. Since sparsemem is choosen as default for Exynos, flatmem > option is not available. Theoretically, sparsemem could be used on > Exynos platforms, but if all existing exynos4/5 based boards have no > holes in memory, then why not use flatmem instead? If there are > performance benefits of using flatmem over sparesmem on systems > without any memory holes, then it is a compelling reason to stop using > sparsemem on Exynos. But then, what if there is a new Exynos4/5 based > board that comes up and that has a memory hole? Or, how about removing > sparsemem as default option for ARCH_EXYNOS and enabling sparsemem for > boards that need it. I'm not sure about any significant performance benefits of FLATMEM over SPARSEMEM. Some ancient benchmark from 2007 shows that overhead level of both is similar. You can find the benchmark here: http://lkml.indiana.edu/hypermail/linux/kernel/0711.1/1239.html I think we should leave it as is for the time being and just make sure that sections of boards are defined according to section size limit. Best regards, -- Tomasz Figa Samsung Poland R&D Center SW Solution Development, Linux Platform ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-16 12:58 ` Tomasz Figa @ 2012-11-16 13:17 ` Thomas Abraham 2012-11-16 18:43 ` Tomasz Figa 0 siblings, 1 reply; 10+ messages in thread From: Thomas Abraham @ 2012-11-16 13:17 UTC (permalink / raw) To: Tomasz Figa Cc: linux-arm-kernel, devicetree-discuss, grant.likely, rob.herring, linux-samsung-soc, kgene.kim, chaos.youn On 16 November 2012 18:28, Tomasz Figa <t.figa@samsung.com> wrote: > On Friday 16 of November 2012 18:03:15 Thomas Abraham wrote: >> On 16 November 2012 16:41, Tomasz Figa <t.figa@samsung.com> wrote: >> > On Thursday 15 of November 2012 13:48:55 Thomas Abraham wrote: >> >> Hi Tomasz, >> >> >> >> Thanks for your comments. >> >> >> >> On 12 November 2012 19:37, Tomasz Figa <t.figa@samsung.com> wrote: >> >> > Hi Thomas, >> >> > >> >> > On Saturday 03 of November 2012 20:19:32 Thomas Abraham wrote: >> >> >> Add a minimal board dts file for Samsung Exynos4412 based SMDK >> >> >> board. >> >> >> >> >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> >> >> >> --- >> >> >> This patch depends the on the following patch posted by Tomasz >> >> >> Figa. >> >> >> "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" >> >> >> >> >> >> arch/arm/boot/dts/Makefile | 1 + >> >> >> arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 >> >> >> >> >> >> +++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), 0 >> >> >> deletions(-) >> >> >> >> >> >> create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts >> >> >> >> >> >> diff --git a/arch/arm/boot/dts/Makefile >> >> >> b/arch/arm/boot/dts/Makefile >> >> >> index f37cf9f..36488a5 100644 >> >> >> --- a/arch/arm/boot/dts/Makefile >> >> >> +++ b/arch/arm/boot/dts/Makefile >> >> >> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ >> >> >> >> >> >> dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ >> >> >> >> >> >> exynos4210-smdkv310.dtb \ >> >> >> exynos4210-trats.dtb \ >> >> >> >> >> >> + exynos4412-smdk4412.dtb \ >> >> >> >> >> >> exynos5250-smdk5250.dtb >> >> >> >> >> >> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb >> >> >> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ >> >> >> >> >> >> diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts >> >> >> b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 >> >> >> index 0000000..f05bf57 >> >> >> --- /dev/null >> >> >> +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts >> >> >> @@ -0,0 +1,45 @@ >> >> >> +/* >> >> >> + * Samsung's Exynos4412 based SMDK board device tree source >> >> >> + * >> >> >> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. >> >> >> + * http://www.samsung.com >> >> >> + * >> >> >> + * Device tree source file for Samsung's SMDK4412 board which is >> >> >> based >> >> >> on + * Samsung's Exynos4412 SoC. >> >> >> + * >> >> >> + * This program is free software; you can redistribute it and/or >> >> >> modify + * it under the terms of the GNU General Public License >> >> >> version 2 as + * published by the Free Software Foundation. >> >> >> +*/ >> >> >> + >> >> >> +/dts-v1/; >> >> >> +/include/ "exynos4412.dtsi" >> >> >> + >> >> >> +/ { >> >> >> + model = "Samsung SMDK evaluation board based on Exynos4412"; >> >> >> + compatible = "samsung,smdk4412", "samsung,exynos4412"; >> >> >> + >> >> >> + memory { >> >> >> + reg = <0x40000000 0x40000000>; >> >> >> + }; >> >> > >> >> > This will not boot, because section size limit is set to 256 MiB. >> >> > >> >> > It might work with CONFIG_ARM_ATAG_DTB_COMPAT enabled, because the >> >> > memory configuration from DT is ignored and values from ATAGs are >> >> > taken instead. >> >> > >> >> > I suggest you to change it to 4 banks of 256 MiB. >> >> >> >> Thanks for pointing this out. So are there any existing exynos based >> >> platforms that use sparse mem? If not, we should probably remove the >> >> section length configuration itself for mach-exynos. I suspect this >> >> setting might not help with the single kernel image support as well. >> > >> > Isn't sparse memory the only configuration available for ARCH_EXYNOS? >> >> Yes, true. Since sparsemem is choosen as default for Exynos, flatmem >> option is not available. Theoretically, sparsemem could be used on >> Exynos platforms, but if all existing exynos4/5 based boards have no >> holes in memory, then why not use flatmem instead? If there are >> performance benefits of using flatmem over sparesmem on systems >> without any memory holes, then it is a compelling reason to stop using >> sparsemem on Exynos. But then, what if there is a new Exynos4/5 based >> board that comes up and that has a memory hole? Or, how about removing >> sparsemem as default option for ARCH_EXYNOS and enabling sparsemem for >> boards that need it. > > I'm not sure about any significant performance benefits of FLATMEM over > SPARSEMEM. Some ancient benchmark from 2007 shows that overhead level of > both is similar. > > You can find the benchmark here: > http://lkml.indiana.edu/hypermail/linux/kernel/0711.1/1239.html > > I think we should leave it as is for the time being and just make sure > that sections of boards are defined according to section size limit. Ok, makes sense. Thanks. By the way, I was checking why this patch did not lead me to a crash as you described. u-boot seems to be overriding the memory node in the dts file and creating a new memory node with the memory banks information that u-boot has. So looking at /proc/device-tree/memory/reg, there are multiple 256MB sized entries there. Regards, Thomas. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board 2012-11-16 13:17 ` Thomas Abraham @ 2012-11-16 18:43 ` Tomasz Figa 0 siblings, 0 replies; 10+ messages in thread From: Tomasz Figa @ 2012-11-16 18:43 UTC (permalink / raw) To: Thomas Abraham Cc: Tomasz Figa, linux-arm-kernel, devicetree-discuss, grant.likely, rob.herring, linux-samsung-soc, kgene.kim, chaos.youn On Friday 16 of November 2012 18:47:54 Thomas Abraham wrote: > On 16 November 2012 18:28, Tomasz Figa <t.figa@samsung.com> wrote: > > On Friday 16 of November 2012 18:03:15 Thomas Abraham wrote: > >> On 16 November 2012 16:41, Tomasz Figa <t.figa@samsung.com> wrote: > >> > On Thursday 15 of November 2012 13:48:55 Thomas Abraham wrote: > >> >> Hi Tomasz, > >> >> > >> >> Thanks for your comments. > >> >> > >> >> On 12 November 2012 19:37, Tomasz Figa <t.figa@samsung.com> wrote: > >> >> > Hi Thomas, > >> >> > > >> >> > On Saturday 03 of November 2012 20:19:32 Thomas Abraham wrote: > >> >> >> Add a minimal board dts file for Samsung Exynos4412 based SMDK > >> >> >> board. > >> >> >> > >> >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > >> >> >> --- > >> >> >> This patch depends the on the following patch posted by Tomasz > >> >> >> Figa. > >> >> >> "ARM: dts: exynos4: Add support for Exynos4x12 SoCs" > >> >> >> > >> >> >> arch/arm/boot/dts/Makefile | 1 + > >> >> >> arch/arm/boot/dts/exynos4412-smdk4412.dts | 45 > >> >> >> > >> >> >> +++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+), > >> >> >> 0 > >> >> >> deletions(-) > >> >> >> > >> >> >> create mode 100644 arch/arm/boot/dts/exynos4412-smdk4412.dts > >> >> >> > >> >> >> diff --git a/arch/arm/boot/dts/Makefile > >> >> >> b/arch/arm/boot/dts/Makefile > >> >> >> index f37cf9f..36488a5 100644 > >> >> >> --- a/arch/arm/boot/dts/Makefile > >> >> >> +++ b/arch/arm/boot/dts/Makefile > >> >> >> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ > >> >> >> > >> >> >> dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ > >> >> >> > >> >> >> exynos4210-smdkv310.dtb \ > >> >> >> exynos4210-trats.dtb \ > >> >> >> > >> >> >> + exynos4412-smdk4412.dtb \ > >> >> >> > >> >> >> exynos5250-smdk5250.dtb > >> >> >> > >> >> >> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb > >> >> >> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ > >> >> >> > >> >> >> diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts > >> >> >> b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 > >> >> >> index 0000000..f05bf57 > >> >> >> --- /dev/null > >> >> >> +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts > >> >> >> @@ -0,0 +1,45 @@ > >> >> >> +/* > >> >> >> + * Samsung's Exynos4412 based SMDK board device tree source > >> >> >> + * > >> >> >> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. > >> >> >> + * http://www.samsung.com > >> >> >> + * > >> >> >> + * Device tree source file for Samsung's SMDK4412 board which > >> >> >> is > >> >> >> based > >> >> >> on + * Samsung's Exynos4412 SoC. > >> >> >> + * > >> >> >> + * This program is free software; you can redistribute it > >> >> >> and/or > >> >> >> modify + * it under the terms of the GNU General Public License > >> >> >> version 2 as + * published by the Free Software Foundation. > >> >> >> +*/ > >> >> >> + > >> >> >> +/dts-v1/; > >> >> >> +/include/ "exynos4412.dtsi" > >> >> >> + > >> >> >> +/ { > >> >> >> + model = "Samsung SMDK evaluation board based on > >> >> >> Exynos4412"; > >> >> >> + compatible = "samsung,smdk4412", "samsung,exynos4412"; > >> >> >> + > >> >> >> + memory { > >> >> >> + reg = <0x40000000 0x40000000>; > >> >> >> + }; > >> >> > > >> >> > This will not boot, because section size limit is set to 256 MiB. > >> >> > > >> >> > It might work with CONFIG_ARM_ATAG_DTB_COMPAT enabled, because > >> >> > the > >> >> > memory configuration from DT is ignored and values from ATAGs are > >> >> > taken instead. > >> >> > > >> >> > I suggest you to change it to 4 banks of 256 MiB. > >> >> > >> >> Thanks for pointing this out. So are there any existing exynos > >> >> based > >> >> platforms that use sparse mem? If not, we should probably remove > >> >> the > >> >> section length configuration itself for mach-exynos. I suspect this > >> >> setting might not help with the single kernel image support as > >> >> well. > >> > > >> > Isn't sparse memory the only configuration available for > >> > ARCH_EXYNOS? > >> > >> Yes, true. Since sparsemem is choosen as default for Exynos, flatmem > >> option is not available. Theoretically, sparsemem could be used on > >> Exynos platforms, but if all existing exynos4/5 based boards have no > >> holes in memory, then why not use flatmem instead? If there are > >> performance benefits of using flatmem over sparesmem on systems > >> without any memory holes, then it is a compelling reason to stop using > >> sparsemem on Exynos. But then, what if there is a new Exynos4/5 based > >> board that comes up and that has a memory hole? Or, how about removing > >> sparsemem as default option for ARCH_EXYNOS and enabling sparsemem for > >> boards that need it. > > > > I'm not sure about any significant performance benefits of FLATMEM over > > SPARSEMEM. Some ancient benchmark from 2007 shows that overhead level > > of > > both is similar. > > > > You can find the benchmark here: > > http://lkml.indiana.edu/hypermail/linux/kernel/0711.1/1239.html > > > > I think we should leave it as is for the time being and just make sure > > that sections of boards are defined according to section size limit. > > Ok, makes sense. Thanks. By the way, I was checking why this patch did > not lead me to a crash as you described. u-boot seems to be overriding > the memory node in the dts file and creating a new memory node with > the memory banks information that u-boot has. So looking at > /proc/device-tree/memory/reg, there are multiple 256MB sized entries > there. OK, it seems like you are using a DT-aware u-boot. It can generate memory and chosen nodes, so I guess the behavior you observe is fine. I'm testing on a legacy u-boot version without DT support, so all the information must be included in the appended DTB and so I observed boot crashes with too big sections. Btw. It seems like Kgene has already applied your patch, so let's send a separate fixup patch. It can be considered a fix so there shouldn't be any problems with merging it. Should I send it or you will do it? Best regards, Tomasz Figa ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-11-16 18:43 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-11-03 14:49 [PATCH] ARM: dts: add board dts file for Exynos4412 based SMDK board Thomas Abraham 2012-11-06 11:28 ` Kukjin Kim 2012-11-15 8:14 ` Thomas Abraham 2012-11-12 14:07 ` Tomasz Figa 2012-11-15 8:18 ` Thomas Abraham 2012-11-16 11:11 ` Tomasz Figa 2012-11-16 12:33 ` Thomas Abraham 2012-11-16 12:58 ` Tomasz Figa 2012-11-16 13:17 ` Thomas Abraham 2012-11-16 18:43 ` Tomasz Figa
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).